6spdmalibu
07-22-2009, 07:00 PM
Hello one and all.
Been a car nut before i could drive!
Well, am building my 5th car and am looking for some comments and suggestions along the way.
For starters, it is a 81 Malibu two door, multi coloured for now as I'll get to the paint last anyways.
Now for the goodies, 350 crate engine(300hp) 1piece rear main seal, which allowed me to put a t56 trans spinning an 8.5" rear with 3.42 posi.
Global west negative roll upper arms with Del a lum bushings, B body spindles 1LE discs. Also have 4 different sway bars but currently using a 1 1/16" with poly mounts and links. Eibach springs F/R including Edelbrock shocks.
In the rear, using GW lower control arms, stock uppers and no sway bar.
The whole thing rolls on 16" GTA rims and whats left of some Dunlops:6gears:
jerry
Been a car nut before i could drive!
Well, am building my 5th car and am looking for some comments and suggestions along the way.
For starters, it is a 81 Malibu two door, multi coloured for now as I'll get to the paint last anyways.
Now for the goodies, 350 crate engine(300hp) 1piece rear main seal, which allowed me to put a t56 trans spinning an 8.5" rear with 3.42 posi.
Global west negative roll upper arms with Del a lum bushings, B body spindles 1LE discs. Also have 4 different sway bars but currently using a 1 1/16" with poly mounts and links. Eibach springs F/R including Edelbrock shocks.
In the rear, using GW lower control arms, stock uppers and no sway bar.
The whole thing rolls on 16" GTA rims and whats left of some Dunlops:6gears:
jerry