gort69
07-14-2009, 08:44 PM
Hi guys -
Just completed a rear LS1 disc install on a 69 Camaro with a functioning e-brake. I did a fairly long write up on it at Team Camaro with photos. I hope the moderators don't mind if I link to it here. If that's not cool, I apologize in advance and will copy it over to this site. Hopefully someone can benefit from this. Much of this should apply to virtually any GM vehicle with a stock 10 or 12 bolt axle flange pattern. Mine is an 8.2 10 bolt. Thanks.
http://www.camaros.net/forums/showthread.php?t=161383
Just completed a rear LS1 disc install on a 69 Camaro with a functioning e-brake. I did a fairly long write up on it at Team Camaro with photos. I hope the moderators don't mind if I link to it here. If that's not cool, I apologize in advance and will copy it over to this site. Hopefully someone can benefit from this. Much of this should apply to virtually any GM vehicle with a stock 10 or 12 bolt axle flange pattern. Mine is an 8.2 10 bolt. Thanks.
http://www.camaros.net/forums/showthread.php?t=161383