PDA

View Full Version : T-56 Pre-86 Block Alternative



zuess4u
03-25-2005, 06:26 AM
Alright, we finally got our Quater Master throw out bearing, it looks like this will work, the biggest thing will be making a sleeve for the bearing retainer that the throw out bearing rides on. The t-56 retainer is smaller in diameter then the the standard Muncie. Again, the flywheel is from an 80s Corvette and the clutch will be just a standard push type. If this works, (which it should) you will be able some dough, and have the push style clutch. stay tunned I will keep everyone posted, it should take a few weeks.

SmooveG
03-26-2005, 05:48 PM
Does your plan call for use of the F body hyd master clylinder?

zuess4u
03-27-2005, 09:00 PM
Does your plan call for use of the F body hyd master clylinder?

aT THIS TIME "NO", we need to find out some clerance needs for the clutch, then get the proper bore sized master for it, most likely Willwood or Tilton, something easy to replace and cheap to come by.