pics needed of 3 link setups

[baggins]

i am in the beginning stages of planning my 3 link to put in my 65 stang. i need pics for ideas as far as packaging it all. i have made 2x3 frame rails from the front original frame rails all the way back. and there is no floor board from the back seat back. i'll be using an 8.8 and plan on using a watts as a locating device. any pics would be appreciated Thanks-Nick

[jerome]

longer lowers connecting to a crossmember from the rails
upper you will have to get creative
Griggs racing has a 8.8 diff cover setup for a watts link already
Actually I think they have a whole rear suspension for your car

This isn't a mustang, but you get the idea:
https://static1.pt-content.com/images/pt/2008/07/6101170817-1.jpg

https://static1.pt-content.com/images/pt/2008/07/6101170816-1.jpg

https://static1.pt-content.com/images/pt/2008/07/6101170829-1.jpg

https://static1.pt-content.com/images/pt/2008/07/6101171354-1.jpg

https://static1.pt-content.com/images/pt/2007/12/610180206-1.jpg

[baggins]

so at right height what angles do i want to put the upper and lowers at, parallel to the ground or what? also whats the formula for figuring out the link lengths? i know these are newb questions but i have had a hard time coming up with these figures. Thanks Nick

[BillyShope]

Check out Page 18 at my site:
http://www.racetec.cc/shope