What kind of rear suspension?

[67LS1T56]

Saw this on ebay and like to know what kind of set up is this? That doesnt look to healthy to me.

[dhutton]

Fatman Fab was selling a suspension with half leafs like that if I remember right.

[JRouche]

Thats pretty interesting. Never saw anything like that before. I wonder how the rear end is gonna rotate in a turn??? JR

[Twentyover]

Fatman is a little lean on information in their catalog
http://www.fatmanfab.com/catalogpage.php?page=25
but I'm guessing a rubber bush or rod end of some type at the front of the leaf

[ProdigyCustoms]

I have one of these set ups we removed from a car. Complete set up with a 3.73 posi, has 100 miles on it. Also comes with shockwaves, CHEAP. $1500 for everything.

[Apogee]

it almost looks like a quarter elliptic setup...but then it's got the coilovers too. Cheap alternative to proper links with pivots it would seem. That just looks like axle wrap waiting to happen.

Tobin
KORE3

[1azz2risk]

I am currently getting installed a billet G bar 4 link from Chris Alston Chassisworks. I have learned that if you shop at "Walmart" that is the quality you get. Spend the extra money and do it right the first time. Trust me I have learned the hard way and wasted a lot of money. The kit I got was $2,700 for the billet, you can get the steel version for about $2100. The kit is almost all bolt on except for the tabs on the axle housing but the kit comes with a location bracket that bolts onto rear end to make it easy to weld..Do it right the first time....

https://static1.pt-content.com/images/noimg.gif