The Stickman
05-12-2009, 06:07 PM
Ok today I worked on getting my bumpers tucked in for a cleaner look. The front I had a partially colapsed bumper shock so I colapsed it all the way. I ended up having to drill out the other to get it to colapse.
https://static1.pt-content.com/images/pt/2009/05/100_3951-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3952-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3953-1.jpg
The rear is just setting there. I kinda like how it is but to get that position to work will take some cutting and welding. I don't like how the ends stick out so we may cut the ends off and weld plates on that will tie into the quarter panels.
https://static1.pt-content.com/images/pt/2009/05/100_3944-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3945-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3946-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3951-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3952-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3953-1.jpg
The rear is just setting there. I kinda like how it is but to get that position to work will take some cutting and welding. I don't like how the ends stick out so we may cut the ends off and weld plates on that will tie into the quarter panels.
https://static1.pt-content.com/images/pt/2009/05/100_3944-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3945-1.jpg
https://static1.pt-content.com/images/pt/2009/05/100_3946-1.jpg