View Full Version : Project SSINISTR
awdvette
05-05-2009, 11:14 AM
Here is my project. 87 Monte Carlo SS
Specs
383 LT1
Forged Eagle Rotating Kit
LSX Killer Trickflow Heads
Custom Supercharger brackets for Powerdyne BD11a running 8Psi
Built T-56
9" Ford Rear 3.70:1
Hotchkis TVS Suspension
Bilstein Shocks
Custom brackets for C5 brakes
LS1 Rear Brakes
Hydroboost from Astro
Still working on it. Next is paint and body:hand:
https://static1.pt-content.com/images/pt/2009/05/3505364266_db0ea6ab98_b-1.jpg
https://static1.pt-content.com/images/pt/2009/05/3504550701_0982e8c9f9_b-1.jpg
https://static1.pt-content.com/images/pt/2009/05/3505363246_2489101b8e_b-1.jpg
https://static1.pt-content.com/images/pt/2009/05/3504550049_69e27eec5f_b-1.jpg
CruizinKev
05-05-2009, 12:40 PM
NICE!!!! :twothumbs
dropit69
05-05-2009, 12:50 PM
sweet project !!! looks to be really clean body too..
awdvette
05-05-2009, 01:20 PM
Some interior pics
https://static1.pt-content.com/images/pt/2009/05/3504560003_38dc3e28b8_b-1.jpg
https://static1.pt-content.com/images/pt/2009/05/3505365102_dd22d43a2b_b-1.jpg
awdvette
05-05-2009, 01:22 PM
Thanks.
Still have a lot to do. I plan on running some 17x10 or 11's out back with some 315's. I have 255 out back now but the car is traction limited:) So in the next couple of weeks I plan on doing a frame notch.
Flash68
05-05-2009, 01:46 PM
Nice project!
ed1le
05-05-2009, 06:11 PM
Love it!
FirstGenZq8
05-05-2009, 06:15 PM
boobies! i love all of the gbodies on this site!
LSX Killer Trickflow Heads? did you mean LTX Killer Trickflow Heads?
1971CHEVELLE
05-05-2009, 06:37 PM
very cool :1st:
Tony_SS
05-05-2009, 07:05 PM
Nice setup!
ProTouring442
05-06-2009, 03:25 AM
Cool project! Explain if you will the electric water pump on an LT motor?
Shiny Side Up!
Bill
awdvette
05-06-2009, 04:16 AM
Cool project! Explain if you will the electric water pump on an LT motor?
Shiny Side Up!
Bill
I installed the electric wp to free up some hp. I also installed a dual roller timing chain on the engine getting rid of the factory drive coupler for the factory wp.
jackfrost
05-06-2009, 08:27 AM
badass MC. that is one car I would not want to mess with. what did you use for your pedals?
is there an AWD Vette somewhere?
lt1chevelle
05-06-2009, 11:31 AM
what kind of wire looms and spark plug wires are u using. also did u have to make that brakets to the superchrager? i was thinking about putting supercharger on my lt1 but didnt kno if i had to make a braket or not
awdvette
05-06-2009, 02:39 PM
boobies! i love all of the gbodies on this site!
LSX Killer Trickflow Heads? did you mean LTX Killer Trickflow Heads?
They flow more then LSX heads.
awdvette
05-06-2009, 02:40 PM
badass MC. that is one car I would not want to mess with. what did you use for your pedals?
is there an AWD Vette somewhere?
I had a AWD Trailblazer SS a couple of years ago. As for the pedals I had a 95 F-Body clutch pedal the i extended about 2"
awdvette
05-06-2009, 02:46 PM
what kind of wire looms and spark plug wires are u using. also did u have to make that brakets to the superchrager? i was thinking about putting supercharger on my lt1 but didnt kno if i had to make a braket or not
I am running a RM wiring loom kit from Summit
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RNM%2D1120P&N=700+4294925143+4294756594+4294862572+400213+4294 908216+4294862555+4294924755+4294908395+115&autoview=sku
With a set of custom MSD Wires.
I custom built the bracket out of 2024 1/2 plate aluminum. I am running a underdrive pulley to run all the accessories and a Jegs SFI damper to run the SC. I was also able to use the factory style tensioner also.
awdvette
02-14-2012, 01:40 PM
Updates:
The 383 LT1 I had decided to snap the crankshaft (Eagle)... In 3 places... In my driveway. Ended up putting a ATI Procharger D1SC on her running a little too much boost. So I pulled the engine took it to the dump. Took the majority of the parts and sold them. Then let it sit for a year...
Its back together again:)... Sporting a new setup..
Specs:
1970 4 Bolt 350 LT1 Block
Lunati Sledgehammer Crank
Forged Rods / Pistons
AFR Eliminator Vortec Heads
Howards Retrofit Roller Cam
Edelbrock Pro Flo EFI Intake Manifold
Fast EZ-EFI Fuel Injection
MSD 6AL2 Programable Ignition
TH400
3200 Stall Converter
C5 Vette Front Brakes
LS1 Rear Brakes
9" Ford 31 Spline Mosers
OPGI 2/3 Drop Springs
Bilstein Shocks
Procar Scat Seats
3" Pypes exhaust system
55532
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
CruizinKev
04-19-2012, 06:48 AM
looking good! :twothumbs you said you got the Procar Scat seats in? leather or vinyl? how do you feel about them? any pics??
SSTuner
08-13-2012, 08:42 AM
This is all custom made by him and yes I'm very proud of him.
If only I can get him to drive three miles to my house and help me with my "Mistress"
I will let him update the status.
6327663277632786327963280632816328263283
Enjoy
awdvette
09-14-2012, 12:41 PM
644556445664457644586445964455
B-lakins34
02-05-2014, 02:51 PM
Would you ever consider selling it and if u do will u send me the price at (423)-648-3723 thank you
gee4u
02-27-2019, 07:17 AM
how did you mount your seats
SSTuner
02-27-2019, 02:59 PM
Been a while
SSTuner
02-27-2019, 03:03 PM
More
SSTuner
02-28-2019, 01:19 AM
I'll get my son to create an account and post and answer any questions. Here are Red,White,Blue. (real Typhoon)
awdvette
02-28-2019, 03:27 PM
I used Procar Seat Mounts for the G-body
Powered by vBulletin®