69 camaro front spoiler???

[69camarokid]

i have a stock style front spoiler on my 69 camaro. Im over it. Everyone and there mother has one... im not interested in my 69 looking stock or like anyone elses...

im looking for a more pro-touring/gmachine stle front spoiler. Something alittle more aggressive looking.

Does anyone know where i could buy one? thanks

[buickfunnycar.com]

Carbon fiber or aluminum..?

[69camarokid]

Carbon fiber or aluminum..?

the carbon fiber ones are sick and i do like them, but the only carbon fiber ones ive seen are stock style replacements. I want something a little more "out there".

I have seen before sme really wicked aluminum ones but i dont know where to go to purchase one. So id rather go with an aluminum one and just powder coat it black.

[novaderrik]

make one..

[JEFFTATE]

Call Tyler at Anvil Auto.
They make Carbon Fiber stuff.

Jake Parrot of Jake's Rod Shop , Steevo at Twist Machine , and Vinnie Allegretta , and Tyler Beauregard of ATS (and Anvil Auto) have custom made aluminum spoilers on their cars.
Do a search or pm them about where they got them.

[hotwheels]

Where actually working on a whole lower front valance that incorporates the fender extentions and a custom air dam in carbon fiber. The pattern is about 1/2 way done and has an opening for extra cooling (intercooler, etc.)

[hotwheels]

I'll try to post a rendering tomorrow of the valance.

[Steve Chryssos]

We built a dozen or so rear spoilers before the streetfighter thing took off. We sold all of them and then some... As hand fabricated pieces, they are pricey--$500 range. So you will need to show real interest for these parts in order to help prove a sound business model. Here's the front spoiler that Jake built for Destroyer, his own '69.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

And the rear....
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[69camarokid]

I'll try to post a rendering tomorrow of the valance.

looking foreward to it

[69camarokid]

We built a dozen or so rear spoilers before the streetfighter thing took off. We sold all of them and then some... As hand fabricated pieces, they are pricey--$500 range. So you will need to show real interest for these parts in order to help prove a sound business model. Here's the front spoiler that Jake built for Destroyer, his own '69.



dang! that front is all kinds of sexy
i love it! but at 500 bucks its a bit out of my price range for the time being:idea:

[Mr.VENGEANCE]

this one might be in your price range.. and they look pretty decent.

https://static1.pt-content.com/images/noimg.gif
http://www.pro-spoilers.com/store.html

[gvanlaar]

I was looking forward to that rendering today...

[yellowrallys]

Jake's car looks doggone good!

[GregD]

I have the Trans American race spoiler from pro-spoilers. I've only test fit it so far and have not mounted it. Its a great piece for the money although mine looks a bit different than the one in the photos on the web page. Mine is flat black powder coat but the leading edge(chin) is brushed aluminum. It looks like it will fit great, I just need to figure out a good mounting method without tearing up my front valance too much.

edit... it actually looks exactly like the photo above, however I don't have the induction holes in mine.

[ss dave]

I ordered the 2009 low profile vented spoiler yesterday. I've been brain racking to find a way to feed my cleaner cold air. This may be the answer.

[hotwheels]

I tried to post the illustrations, and I usually have no problems, but something is going on that is beyond me. I'll get Tyler to do it since he's younger and more computer savvy than I.

[TitoJones]

Here is that 69 front end we are working on.

https://static1.pt-content.com/images/pt/2009/05/dh358z-1.jpg

Tyler

[Steve1968LS2]

Just make sure you guys all make them to fit 67s and 68s as well... :)

[gvanlaar]

That looks pretty good. Looks like it will leave the door wide open for some side skirts too.

[TitoJones]

Just make sure you guys all make them to fit 67s and 68s as well... :)

Won't fit.
We are making it to replace the fender side extensions, the bumper and the lower valance with one solid piece of carbon. The bumper is pulled in and smoothed out, driving lights staying in the factory locations. We are looking into adding small ducting recessed for brake cooling and adding a matched mesh screen to go along with our hood vents and cowl panels.

I am trying to see if I can fab up the front spoiler from my Chicane-LM rendering in my free time and then tool it via the Anvil brand name.

https://static1.pt-content.com/images/pt/2009/05/2mzw0ib-1.jpg
Tyler

[CamaroJesse]

Tyler that looks awesome! How long till your sellin it?

[streetk14]

That would be awesome!




Won't fit.
We are making it to replace the fender side extensions, the bumper and the lower valance with one solid piece of carbon. The bumper is pulled in and smoothed out, driving lights staying in the factory locations. We are looking into adding small ducting recessed for brake cooling and adding a matched mesh screen to go along with our hood vents and cowl panels.

I am trying to see if I can fab up the front spoiler from my Chicane-LM rendering in my free time and then tool it via the Anvil brand name.

https://static1.pt-content.com/images/pt/2009/05/2mzw0ib-1.jpg
Tyler

[redfire69]

This is going to smooth and replace the front bumper..... interesting!


Here is that 69 front end we are working on.

https://static1.pt-content.com/images/pt/2009/05/dh358z-1.jpg

Tyler

[Nick Ostas]

looking to purchase of of these spoilers made by Jake built foe DESTROYER, please help with info and price, please include all fasteners and hardware.

[rjsjea]

looking to purchase of of these spoilers made by Jake built foe DESTROYER, please help with info and price, please include all fasteners and hardware.

http://www.jakesrodshop.com/Products.html

[jat5150]

Very cool, would love to see this when it's done!