derekf
04-25-2009, 05:27 PM
Okay, so the distribution block from my elky was sitting in a box with snipped-off bits of brake line attached, so I don't know what goes where.
It's pretty obvious that the two lines from the MC go into the top, where the connector for the brake light goes.
I'm going to hazard a guess that the large connector on one end goes to a larger line that goes to drive the rear brakes, and that the other, smaller connector end and the bottom are for the front brakes? Do I have that right?
Block is from a 69 El Camino with drum/drum brakes.
It's pretty obvious that the two lines from the MC go into the top, where the connector for the brake light goes.
I'm going to hazard a guess that the large connector on one end goes to a larger line that goes to drive the rear brakes, and that the other, smaller connector end and the bottom are for the front brakes? Do I have that right?
Block is from a 69 El Camino with drum/drum brakes.