Autokraft LSx oil pan measurements

[memery]

Does anyone have the measurements for their oil pan? I need a pan for my '66 Nova, LS2, TCI front clip project. The sump portion can only extend at most 11" from the rear (depth of pan is not real important as there is lots of room) and the front portion of the pan (the first 10" or so) needs to measure about 1 1/2" from the block surface.
Any help is appreciated.

[BossaNova]

Check this out:
http://www.ls1tech.com/forums/conversions-hybrids/817787-lsx-oil-pans.html

[memery]

Thanks for the link to LS1Tech. I found everything except the depth of the pan for the front portion. Anyone have that measurement?

[meenaggie]

Front portion of the autokraft pan is 1-7/8" deep including the mounting flange (not including any gasket thickness). Hope that helps.