I'm really not new.

[TiGer85SS]

My name is Tony, and I have been viewing the forum for a while and decided to make my first post. I will be totally redoing a 68 Camaro, so I will need all of the wealth of knowledge that is available here. I will post some beginning pics soon.

[ProdigyCustoms]

Thanks for piping up. there is plenty of knowledge here. And put up some pics as you go along.

[1971CHEVELLE]

Welcome to the site

[TiGer85SS]

I will be posting pics of the whole build. Also plans right now are an LS based motor, probably with a 4l60e with PATCs new close ratio gear set and 9in or 12 Bolt rear. I am also thinking of doing a full frame. But I will have to see if it really worth it or not.

[monmon030791]

Frank hi!

[icebird84]

welcome to P.T Tony

[daredvl22]

Hey Tony, I was the same way. After visiting this site for nearly 6 months I made my first post not too long ago. It is addicting and the knowledge I've gained from this group is amazing. Good luck and post some pics!

[6'9"Witha69]

Welcome aboard Tony.