what booster and master will I need?

[aany001]

hello folks.....I installed C5 front brakes and LS1 rear brakes on my 69 camaro and wondering what booster should I run as well as which master cylinder would work?
thanks in advance
Steve

[Ishmael]

I'm about to do the same swap and I was told by Noel at Touring Classics that a 1 inch bore master and booster out of a disc/disc 69 camaro/early 70's corvette would do the job and look stock.

[aany001]

Cool man thanks.How far is Clinton from Toronto?

[Ishmael]

Way too far - about 3.5 hours depending on who is driving. If you are from T.O you probably get your parts from Early Birds and wish you had the same problems the guys from the south have.

[aany001]

ya Mario is a good friend of mine over at early birds.What do you mean I wish I had the same problems as the guys down south have?
Wow 3.5 hours is quite a ways.....are you north east or west??

[Ishmael]

Tech problems. Handling problems. Everything but lack of rust. I know they have rust in the North East but nothing like here. I'm not trying to say anything mean. I started on this site 5 years ago but haven't been able to do much technical until this year as I've been dealing with the body. I'm on Lake Huron near Goderich (Sifto Salt).

[aany001]

Rust is a nasty thing..........check out my 69 camaro rust issues I had to deal with.I know what you mean! Enjoy the photos.

http://s150.photobucket.com/albums/s108/aany001/?start=40