Dougs D368 headers???

[CamaroJesse]

im ready to order headers for my small block camaro with lee 670 steering box. i read the posts about this but i just want to check one more time and make sure these will fit with no problems.

thanks
Jesse

[wmhjr]

Can't speak to the fitment. However, if you're planning to order them with ceramic coating from Dougs, think again. UPS just picked mine up today to be returned. I'm getting a set from Thermal Tech. For examples, take a look at the photos below. These are brand new, just opened. The vendor I purchased them from was in complete agreement that these are not acceptable and that they'll get a lot worse very fast. Thermal Tech buys raw Dougs headers and coats them on their own. It is said to be a far superior coating.

https://static1.pt-content.com/images/pt/2009/02/22February2009GTO011-1.jpg

https://static1.pt-content.com/images/pt/2009/02/22February2009GTO012-1.jpg

https://static1.pt-content.com/images/pt/2009/02/22February2009GTO008-1.jpg

[CamaroJesse]

oo man thats terrible. thats pretty rediculous. now i dont know what to do.

[wmhjr]

The Dougs header quality itself is fine. It's just their coating. I'd check around and see if somebody like Thermal Tech works. http://www.thermaltechcoatings.com/ is the site, and they do sell Dougs. They just charge more. You can buy raw from Dougs and have them coated yourself separately, but in my searches it has always been at least as much as what Thermal Tech charges directly.

[130fe]

Jesse, you have PM.

[CamaroJesse]

The Dougs header quality itself is fine. It's just their coating. I'd check around and see if somebody like Thermal Tech works. http://www.thermaltechcoatings.com/ is the site, and they do sell Dougs. They just charge more. You can buy raw from Dougs and have them coated yourself separately, but in my searches it has always been at least as much as what Thermal Tech charges directly.

i appreciate the info. i purchased them from thermlcoating today. Thanks for he help!