69projectKAOS

[69projectKAOS]

hows it going guys , i just joined this forum because ive had this 69 x11 since i was 14 and now im 20 and i never really did anything to it besides yank the original motor that was shot and put in a replacement until the orig was rebuilt, i have been in aw over all your guys cars and how they look sooo sweeet!!! i hope mine will get there soon!. i have high hopes for this car but im short on cash becasue im in colllege and you know how it is:hammer:
Plans:


re-undercoat undercarrage and inner fender wells
paint engine compartment
paint subframe and rear end
remove vinyl top
replace rear quarters
lower front 2" and rear 2"
put original motor back in- 350 bored .60 over with mild cam, pushing about 400hp hopefully more wen im done
bigger front and a rear sway bar
rims and tires
fresh paint

wat do you thinK??? and heres the catch...... i got the car for $2,000 with matching numbers!!!!!

[icebird84]

nice project keep us posted

[1971CHEVELLE]

Car looks like a solid base to start from

[69projectKAOS]

its a little rough around the edges but it is a great car to start with!!

[Motown 454]

Nice project keep us posted. And Welcome

[dropit69]

welcome nice start..whats wrong with the top?..i know i had car with a vinyl top and when it was taken off the metal looked like crap from factory..if its in good shape id leave it..keep us updated

[69projectKAOS]

it is a little worn and i really like the look of the plain hardtop camaros. and thanks so much for all the compliments and your interest. i will keep u posted as it continues.

[69projectKAOS]

hey guys i have alot of updates!!! sorry i havent updated since i first started but alot has changed with my baby! i took as many pictures as i could and finally had some time to throw them up on here.

[69projectKAOS]

my baby is almost done! the body shop just had to wet sand it and finish buffing it and then replace the few pieces they took off for paint. i ended up going with a apple red instead of white or black. i also had the shop install a set of bullet mirrors because the stock ones just didn't cut it for me. the drip rails were also painted the same color as the car. it seemed like an eternity that the car has been gone but it actually took less than a year. i know that some guys on here have had there cars in the shop for longer than that but, i am very pleased with the work that the shop has done and i am extremely excited to get it back and install all the goodies that i have sitting in my room and parts yet to come. i aquired a set of 18" ROH international "Modena" 3 piece wheels 245 40r 18 off of a bmw m3 that i bought and i did a mock up of them on the car while it was being worked on and they fit and look great except i need a small spacer for the rear to clear the leaf and inner fender well. oh and they kid with the football shirt on in the engine compartment is me right after the pull. this project has gotten to this point with the help of my family and thanks to them there will be great times to come. thanks for looking , let me know what you think-dom

https://static1.pt-content.com/images/pt/2010/02/104IMAGEPHTO0242-1.jpg
https://static1.pt-content.com/images/pt/2010/02/100M1063100_1346-1.jpg
old 350 that i put in while the original motor was being built
https://static1.pt-content.com/images/pt/2010/02/100M1063100_1354-1.jpg
https://static1.pt-content.com/images/pt/2010/02/100M1063100_1444-1.jpg
original motor bored, stroked, and installed lol
https://static1.pt-content.com/images/pt/2010/02/Picture385-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture384-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture387-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture392-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture394-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture395-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture398-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture399-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture381-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture376-1.jpg
https://static1.pt-content.com/images/pt/2010/02/Picture369-1.jpg
https://static1.pt-content.com/images/pt/2010/02/camaro2-2.jpg
https://static1.pt-content.com/images/pt/2010/02/rims-1.jpg

[4sfed]

Looks great! :smoke:

[CruizinKev]

sweet!! :twothumbs

[69projectKAOS]

going to take more pics tomorrow, ill keep you guy posted-dom

[soundqdoug]

I wish I would've bought mine when I was 14! Looking great!

[69projectKAOS]

thanks guys, i appreciate the compliments! i hope one day my car looks as good as some members cars on here, i have been putting alot of money into it but in the end i know it will be well worth it! -thanks dom

[Motown 454]

Very Nice Dom. Your going to have a ball in this car. Enjoy it.

[steelerguy]

Nice! Another LI Camaro, mine is in the process of becoming whole again also. Hoping it is on the road again this summer. Where did you have your work done?

[T00LMAN]

Good looking project that you have going there.

[ratmotorred511]

Looking good has come a long way:yum:

[69projectKAOS]

i had it done at my fathers friend owns a shop called Middle island collision in middle island on route 25. the shop has had the car since september of last year which really is not that long and they have done a lot of work and i got it at a sweeet price as well.:jump:i was there the other day and they said i should have it back before the end of the week which is making me so antsy because i want to put all my goodies on with my dad and brothers and just take it out for a cruise.:6gears: i am aiming to have everything squared away for april 18th for Street Wars in jersey, but i will keep everyone posted as things progress. thanks-dom

[69projectKAOS]

hey guys got some new updates, nothing to much has changed but they installed the door handles and window trim that i had powder coated black instead of chrome. they installed the bullet mirrors. but within the next few days they are installing my bumpers that i had painted the body color and they will be painting the tail pan flat black. hopefully i will be taking it home soon:fingersx: thanks-dom

https://static1.pt-content.com/images/pt/2010/03/dom3-1.jpg
https://static1.pt-content.com/images/pt/2010/03/dom4-1.jpg
https://static1.pt-content.com/images/pt/2010/03/dom5-1.jpg
https://static1.pt-content.com/images/pt/2010/03/dom6-1.jpg
https://static1.pt-content.com/images/pt/2010/03/dom2-1.jpg

[ratmotorred511]

Blacked out trim looks great I'm doing the black chrome trim on my 69 PS Camaro:idea: Keep up the good work it's coming right along

[67SSDan]

Blacked out trim looks great I'm doing the black chrome trim on my 69 PS Camaro:idea: Keep up the good work it's coming right along

I was getting ready to say the same thing. I dig it.

Dan

[69projectKAOS]

yeah i actually thought that it wouldnt look good but now seeing the contrast between the two colors and it on the car and it looks sweet! and when i get the windows tinted you wont even notice the trim there which makes it look more modern. i thought the chrome was kind of tacky and plus im going for the street fighter look :headbang: thanks for all the compliments guys, i will keep you posted

[69projectKAOS]

New updates!!!!!!
i went to the body shop and did a final mock up of my ROH Modenas. the fronts fit find but the backs rub the shock a little bit and they sit a little deep in the wheel well so i am going to order spacers tomorrow. but the shop let me work on the car and put a few goodies on yesterday. they said it should be done within a few days. so here are the pics, they are kind of teasers because i couldn't move the car out of the garage and get it in the light but hopefully i can soon.oh and the tires do need some air but i was to excited to do it before the pictures were taken. what do you think? it has definitely came a long way!!

https://static1.pt-content.com/images/pt/2010/03/domscamaro002-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro004-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro005-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro006-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro007-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro009-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro010-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro012-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro014-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro015-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro001-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro019-1.jpg
https://static1.pt-content.com/images/pt/2010/03/domscamaro018-1.jpg

[CruizinKev]

sweet, turned out great! :twothumbs

[MCMLXIX]

Very nice... you need the Anvil side marker lights... it will match your blacked out trim and wheels...
http://blogs.superchevy.com/6576430/chevy-news/69-camaro-or-chevelle-side-marker/index.html

https://static1.pt-content.com/images/pt/2010/03/anvilautosnewstealthmarkerlight-1.jpg

[69projectKAOS]

yeah those would look sweet , im deffinately going to check into those, thanks

[dmc69]

very nice.... wish i was that close. What color red is that?

[69projectKAOS]

its called apple red , i got it off of my dads 1985 chevy sierra pick up lol it should pop even more when i get it out in the sun:twothumbs and thank you guys for all the comments!!

[69projectKAOS]

update!! picked up some used seats off craigslist from a local guy. they are monza sport seats, picked them up for $200 very happy with the comfort and overall look. thanks for looking-dom

[Mr.VENGEANCE]

niiice!

[aronhk_md]

Looking very sharp. I especially like the blacked out tail panel.

[69projectKAOS]

thanks for the complements guys, i have a bunch of stuff that i cant wait to put on when i get it back, all the stuff is just building into a pile in my room:twothumbs-thanks dom

[69projectKAOS]

updates!!finally got her home, getting my baby ready for streetwars!!


https://static1.pt-content.com/images/pt/2010/04/FILE0114-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0115-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0116-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0118-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0124-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0129-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0134-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0143-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0146-1.jpg
my little brothers supra with my baby:yum:
http://www.youtube.com/watch?v=fp2sFtc8FuI
http://www.youtube.com/watch?v=qiP2bC-vbd0

[Mr.VENGEANCE]

gawdammn if that 69 doesnt make that supra look weak..

ill take the 69 any day... even if the supra is faster.

nice supra tho.. clean

[69projectKAOS]

thanks Vengeance!! my lil bro says he can take me any day, and hes probably right but im not really into racing , im mostly into the looks factor even though i know she can perform when i want her too. once again thanks for the complement. i was estatic when i saw the truck pull up wit my baby on the back , you have no idea. im actually at the point where i am afraid to go near it because i dont want to scratch it while i work on it :scared:

[crustysack]

why not invite lil bro out for a cruise and see who pulls more chicks and then have the discussion about whos takin who- that car look great- congrats

[CruizinKev]

looking good! :twothumbs but looks like you need some wider tires next? lol at the plates on the supra

[454bug]

VERY NICE Dom!!

Great color! :1st:

[94SNGLTURBO]

very nice.. i think it would be even nicer if you had he door handles powder coated black like the window frames..

[68firebird]

That looks awesome Dom, I love that red, it pops! great job!!

[69projectKAOS]

thank you everyone for the complements, i did some under coating and installed my seats and door panels etc. i will be getting some wider tires and lowering it about 2" or so with my hotchkis springs that i have and getting the rear leafs de-arched. but im mostly getting ready for a show on Sunday in jersey called street wars, it is a benefit for breast cancer with tons of cars. thanks again-dom

68firebird- thank you, and your bird is definitely in a lot better shape than mine was, so with the work you have been doing , your car will turn out great . keep up the good work and in the end you will enjoy it like i am today:6gears:

[Motown 454]

Very nice Dom it looks great.

[69projectKAOS]

going to detail her tomorrow, i will post up some new pics :bananna2:-dom

[ryeguy2006a]

nice project, I like the blacked out chrome.

[69projectKAOS]

hey guys i have a few updates for you, i went to street wars this past weekend and it was a blast, i have those pics on the other camera ill put theem up soon. but these are of the gs stripes i had made in flat black let me know what you
think.and the trailor in the pictures is not mine, it was a last minute borrowed one from a friend because the brakes on my new trailor froze the day of the show, and trust me it took alot of convincing me from my dad and brothers to put my car on that rinky dink trailor lol. but it did its job and was fiine all the way from long island to jersey and back . oh and yeah thats me in the pictures lol i was caught a little off gaurd.
if anyone is interested in the gs stripes let me know i can get them made up for you guys . -dom

https://static1.pt-content.com/images/pt/2010/04/FILE0090-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0086-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0091-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0093-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0108-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0109-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0111-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE01151-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0117-1.jpg

p.s. -thanks vengeance for giving me the idea from the ones off stormy

********** from the pictures how much should i lower the car front/back? i was thinking 2" all around**********

[69projectKAOS]

im in the process of lowering it 2" alla around , will post pics soon-dom

[69projectKAOS]

anyone going to englishtown on may 8th for the big show and race???

[68firebird]

I Love the stripes!! good choice with lowering 2 inches, she needs it. Car looks great dom!!

[1970 TT Rustang]

looks good before you do any more mods i would replace those drums in the front. Its nice to go fast but you need to stop.
Iam in east patchogue you so take her down to captree some time

[69projectKAOS]

TT Rustang- where is captree and when does it start because i would surely take a cruise down-dom

[Motown 454]

The car looks great.

[69projectKAOS]

i was browsing picture threads and found a really nice picture from the show. hope you like it.-dom

https://static1.pt-content.com/images/pt/2010/04/4543139047_cea7efc969_b-1.jpg

[Motown 454]

Sweet.

[mattzoom]

the drop will look badass, im jealous ur done with urs and im just starting mine haha

[1970 TT Rustang]

its at the end of the robert moses parkway south towards the beaches its on every sunday starts at 7am and ends by 12 it gets packed or you can also go to obi which is 2 min from there on ocean parkway

[king427]

hey guys i have a few updates for you, i went to street wars this past weekend and it was a blast, i have those pics on the other camera ill put theem up soon. but these are of the gs stripes i had made in flat black let me know what you
think.and the trailor in the pictures is not mine, it was a last minute borrowed one from a friend because the brakes on my new trailor froze the day of the show, and trust me it took alot of convincing me from my dad and brothers to put my car on that rinky dink trailor lol. but it did its job and was fiine all the way from long island to jersey and back . oh and yeah thats me in the pictures lol i was caught a little off gaurd.
if anyone is interested in the gs stripes let me know i can get them made up for you guys . -dom

https://static1.pt-content.com/images/pt/2010/04/FILE0090-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0086-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0091-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0093-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0108-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0109-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0111-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE01151-1.jpg
https://static1.pt-content.com/images/pt/2010/04/FILE0117-1.jpg

p.s. -thanks vengeance for giving me the idea from the ones off stormy

********** from the pictures how much should i lower the car front/back? i was thinking 2" all around**********

That's a great looking project Dom!!

[69projectKAOS]

^ thanks craig,
i have only yet begun, this summer she is getting alot of upgrades for sure! thanks again-Dom

[69projectKAOS]

update!!!
new disc brake set up, i got these off a 98 camaro, and got a adapter kit from ebay to make it all work, just waiting on my hubs to come back from the machine shop to install them. but these things are huge and are gunna look sweet, ill post installed pictures soon...thanks for looking-Dom

[68firebird]

update!!!
new disc brake set up, i got these off a 98 camaro, and got a adapter kit from ebay to make it all work, just waiting on my hubs to come back from the machine shop to install them. but these things are huge and are gunna look sweet, ill post installed pictures soon...thanks for looking-Dom


awesome!!!! what's the ID of the guy you bought the kit off of on ebay, thats where I got mine too.

[69projectKAOS]

mgchevyparts was his ebay name, its a great kit and fits great too . how is your car coming along?-Dom

[1badchevelle]

what are you doing to upgrade the suspension?

[68firebird]

mgchevyparts was his ebay name, its a great kit and fits great too . how is your car coming along?-Dom


Thats the same guy I got my kit from, I was extremely happy with it. i'm going to get the master cylinder and prop valve from him too. Mines coming along ok, thanks for asking, just at a standstill for a month or so waiting for more cash.

[69projectKAOS]

what are you doing to upgrade the suspension?
im waiting on addco front and rear sway bars to come in, and i have a set of hotchkis springs for the front that will probably go in soon as well, and then im going to order lowering leafs for the rear when i have some more cash. -Dom

68firebird--
yea i am going to do the same thing as well with the master cylinder and prop valve. and then im going to save up some more and go ls1 rears as well.-Dom

[69projectKAOS]

update!

i went out for a cruise the other night with my brother and got some nice shots. let me know what you think-Dom

https://static1.pt-content.com/images/pt/2010/08/FILE0156-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0166-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0165-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0125-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0141-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0145-1.jpg
https://static1.pt-content.com/images/pt/2010/08/FILE0147-1.jpg
And by far my favorite yet!!
https://static1.pt-content.com/images/pt/2010/08/FILE0148-1.jpg

Thanks for looking.-Dom

[68firebird]

Looking good! The last picture is a cool one.

How are those LS1 brakes dom? My ride is still up on stands so I haven't had the opportunity to try them out. probably won't have that opportunity till next year at this point. what master cyl/prop valve combo did you end up going with?

[Josue]

Definately a nice ride!! I really like the fender hash's.

Your bro's Supra is the ish too!

[69projectKAOS]

^^ thanks guys i appreciate the compliments. im trying my best to put as much time and effort as i can into it when im not working.

Rene- they not only look great, but they stop even better! i put about 150 miles on them and i wish i would have done them alot earlier. you will love them when you take that first ride trust me its like night and day compared to drum.

[bonecrrusher]

Car needs a bit of a drop - or 3 big friends sitting in back... LOL!

[69projectKAOS]

^^ yea for sure!! im going with a 2'' drop all around for now and then tweeking it from there. just waiting for some time to work on her. -Dom

[78 Type-LT]

looks sweet

[69projectKAOS]

WELL........... IVE GOT GOOD NEWS AND SOME BAD NEWS. the good news is that i got the car lowered and the stance was dead on.

https://static1.pt-content.com/images/pt/2010/11/5149244565_ef21366ba5_b-1.jpg
and then........ well yeah u figure it out.





https://static1.pt-content.com/images/pt/2010/11/5149275373_23f80e7450_b-1.jpg
i managed to get it jacked up and back on 3 studs without the spacer to get it on the tow truck. and then.......... i f@$$*d up my lip!!!!!.
https://static1.pt-content.com/images/pt/2010/11/5149849752_c6e1e09afa_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5149243101_a783b01f09_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5149243789_5fcc4a6d5f_b-1.jpg
my guess is that the studs i was supplied with by the man who i got the ls1 brake conversion kit from were sub par and couldnt take the stress. as i was driving i felt what seemed like a flat tire. i got out and checked, noticing nothing out of the ordinary i continued to proceed. i got about a block further when i felt uneasy, it felt like the car was pulling to that side. so i decided to try and limp the mile home at about 2mph almost just idling when bam! the car stopped dead and dipped off its axis, at this point i was infuriated thinking i had broken either a tierod, blew a tire, or uv joint. when i emerged from the camaro i was in shock. this is the end result below........
https://static1.pt-content.com/images/pt/2010/11/5149245219_d9f8fa7e79_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5149245803_7a0721f6cb_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5149853874_3c5c3b3d85_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5149247505_c036702035_b-1.jpg
i guess the studs snapped and being concealed by the spacer i was unable to tell the cause of it. whats your thought and opinions. i plan on replacing both sides with new arp wheel studs. i really dont have the money for new rims that wont require spacers, what should i do?

[sr73bu]

Hey Dom- The car looks awesome with the new stance!
Sorry about your bad luck... get everything situated and get it back on the road! dont get discouraged, your car is way too cool to just let sit.....

I think what happened is the lugs (spacer to studs) worked themselves off (its common with aluminum wheels, in this case the spacer). Since you can't really check them to re-torque them every so often, they probably backed off and caused the snap from the loose nut. When i ran spacers i put a drop of blue loctite on each lug that held the spacer in place. Not sure if other guys would reccomend this but it worked for me... a few hundred miles and my wheels needed re-torqueing, but when i inspected the spacers the lugs were still tight.. and when i removed everything the blue loctite wasn't an issue.... hope this helps... You could always put an old set of rallys on it... i have some nice 15x7's and 15x8's i'd sell you cheap with brand new bfg's as a temporary fix.. they are already painted black...

good luck,

-Sean

[69projectKAOS]

thanks sean, i have a set of the factory rallys with the chrome rings, but i don't think they will fit over my ls1 brake conversion because they are only 15 inch rims, and my rotors alone are 13inches without the calipers on them. this happened yesterday at like 5pm and i already have here at my house 2 new goodmark fenders that i scored off craigslist for $150 for the pair, they were never used. i only need the driver side but im going to save the passenger side. im dropping the new fender off tomorrow to be painted then im going to re-re-install it. but im so unsure on what to do with the wheel situation, because i cant have this happen again! im to the point where in scared to drive it because i made it into my dream car and i dont want to see it get destroyed, and the funny thing is i drive this thing like a old lady because i dont want to ruin it lol. i want my car to be a corner carver lol but i know it takes time lol -Dom

does anyone have a part # for arp wheel studs that will work for me?

[sr73bu]

forgot about your brakes... yeah, they probably wont clear those rims... I cheaped out on rims (17x9 cragar) soft 8's (until i can afford a set of Fiske's)... they were $70 each... they are heavy but the offset was perfect for my car. You may be able to fit them or the 17x8 version.. not sure if its your style though... aleast they will clear the brakes and eliminate spacers...

-Sean

[bonecrrusher]

That sucks!! Good luck with the repairs...

[srh3trinity]

The stance looks awesome. I hate that you had this setback. I have struggled with whether or not to run spacers. If I do, I will make sure that I have quality studs after seeing this. Good luck getting the car back on the road, will be killer with the wheels, stance, paint and GS stripes.

[montessaj]

Man that really sucks! I can't believe how bad it mashed up that fender as well. These things happen I you just have to fix it and move on. I had a lower ball joint blow and it sat on the ground similar to that. When I first saw the picture, thats what I thought had happened. I hope you get it all fixed back up soon. Good luck!

[Mr.VENGEANCE]

damn i missed the thread for a while now.

youre welcome on the stripes, Stormy would have been proud.. they look SICK on your car brotha..

and awww man that sucks!!.. spacers are really a gamble.. but hell.. it coulda been worse my man.

[69projectKAOS]

thanks guys, i am having the new fender painted on Monday but im trying to figure out what size stud i need for the front to not make this happen again, im going with arp studs this time. the studs i got with the ls1 conversion kit were probably crap and made this happen because two sheered off. the big dilemma is that i really don't have the money right now to get new wheels, and in order for me to drive the car i need the spacers because when i turn the wheel they hit the sub frame when no spacer is on. what should i do?-dom

^^^ thanks vengeance, when i get the car all done again i will get you some high quality pictures for the street fighter website. it would be sick to get a picture of stormy and my car together causing havoc on the streets lol, it sucks we live so far away. -Dom

[Mr.VENGEANCE]

do that bro, get her back on her feet, get some nice pics... well be waiting for ya.

[Bryce]

Thats a bummer. Sorry to see this.

[king427]

Man that just sucks! I would go with spacers and ARP studs to get her back on the road just like you said.

[69projectKAOS]

yea i think that's what im going to do, i didn't ruin the spacers at all they actually held up good, the studs on the other had were crap!! so i think that's what im going to do, the car is going for paint tomorrow (Monday) hopefully and should be done in a day or two. i have some pictures with the new fender i put on yesterday , ill post them up later today. thanks -Dom

[montessaj]

Glad to see your getting it back on its feet Dom.

[Motown 454]

Sorry to hear this happened to your car. I lost a rear Cragar on my Z28 pulling a holeshot when I was a kid. It sheared all the studs off and crushed the rear quarter. They had a bad habbit of loosening up every once in a while. If you go with the spacers check them after a few miles and then every once in a while after to make sure they stay tight . Even the best studs will fail if they get loose.

[69projectKAOS]

thanks guys, i ordered a set of arp studs today, once they come in im going to figure out what i can do to not have this happen again, and im going to do it to the passenger side while im at it. thanks-Dom

[69projectKAOS]

alright guys, i finally got some pictures of the new fender on, sorry for the quality they are from my blackberry. but the fender looks good. im definitely going to let the body shop tweak it a little because im no body man lol but all in all it came out good so far. i also got a quick shot of the new ARP studs installed before i put the rims back on. she should be going for paint tomorrow since i can move it around now without worrying about the wheels falling off again. -Dom
https://static1.pt-content.com/images/noimg.gifhttps://static1.pt-content.com/images/noimg.gifhttps://static1.pt-content.com/images/noimg.gif

[69projectKAOS]

alright guys, i had the body work done on the new fender after the little tragic event happened. But now shes back on all four feet and running good as new. i got a few shot of her without the stripes but i decided to go ahead and put them back on. i also indexed the spark plugs and am running 100+ octane now and it feels a lot better running an driving as well. so after all was said and done i took her out for a spin to stretch her legs lol. thanks for looking and Happy Thanksgiving everyone!
https://static1.pt-content.com/images/pt/2010/11/5208158726_8851956e07_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5208160306_1a774191a3_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5208162106_cf8c849433_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5207564247_c8c36f8f57_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5207565691_60f95e91f4_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5207566527_a73f6b9232_b-1.jpg
https://static1.pt-content.com/images/pt/2010/11/5207567575_6be1c5acfd_b-1.jpg

Mr.Vengeance if you could put the last picture and what ever other one you want on the streetfighter website that would be dope! lol thanks-Dom

[sr73bu]

Looking good Dom!... Can't wait to see it at NJMP in April... (hopefully the event is official soon)... Did you get your seat belt situation handled? I didn't mean to be pushy about steering you away from whole Simpson Harness deal... just didnt want to see you waste money like I did and not be able to get out and race it.... boy my wife is going to be pissed when she see's another set of harnesses come in the mail (the right ones this time).. LOL

-Sean

[69projectKAOS]

thanks sean, i am probably going with the scroth harnesses like u said because i don't want to run a cage because its going to be a street car too and i don't want to have to worry about wearing a helmet so i don't get hurt. and you weren't pushy at all, you just didn't want me to make the mistake you did and i appreciate it lol. yea i cant wait to hit the cones with this bad boy lol and hopefully i can get on the road course because that would be sick as well.-Dom

[ModernMuseum]

those stripes look friggin' badass!!!

my buddy has some similar ones on his vette. he's got the exact same color scheme. You implied that they're removable. Are they?

[1970 TT Rustang]

good looking so far bro. Disks are night and day compared to the drums. We got to meet up on the island, i went to the halloween show at bald hill it was packed.

[icebird84]

looks good again ;)

[69projectKAOS]

those stripes look friggin' badass!!!

my buddy has some similar ones on his vette. he's got the exact same color scheme. You implied that they're removable. Are they?

yea they are only flat black vinyl, they cost me about $20 for both sides and they are 3.5" wide and 2feet long. but i trimmed a little off because they were long. the reason i went with the vinyl was because i could always remove them if i got sick of them and wouldn't have to repaint the whole fender.-Dom

good looking so far bro. Disks are night and day compared to the drums. We got to meet up on the island, i went to the halloween show at bald hill it was packed.

the disc are sooooo much better not only in looks but in stopping lol, i don't know how people could have drove like that in 1969 hahaa. yea we definitely have to meet up one of these days, you should come to the meet in jersey in April that Bill Howell is organizing. and i didnt go to the bald hill show because i had the mishap with the wheel studs snapping and the tire coming off, but next year i will try and make alot of them.-Dom

looks good again ;)

Thanks im trying my hardest to get it looking good like all you guys on here :) -Dom

[ModernMuseum]

Ahh, sweet. Where do you get the vinyl stickers? Online or at the paint shop?

[69projectKAOS]

i got them from a sign design shop. the shops that letter up trucks and make banners and building signs etc. -Dom

[king427]

Car looks great Dom!

[69projectKAOS]

thanks Craig!, hows Carlos doing? lol

[sr73bu]

Dom, Hold off on the Schroth harness... atleast with NASA as of April 1, 2011 NO 4 point harnesses will be allowed regardless of dot approval... Not sure if the event in NJ will be run by them, but a 3 point "factory style" seems the way to go according to the rules next year (in regards to the road coarse, for autocross a lap belt is sometimes acceptable, lol) ... now i'm confused on what to do!.... see the top of page 42...
http://www.nasaproracing.com/rules/ccr.pdf

i'm waiting for this NJ thing to go "official", and i'll see what the rules are before i buy any more harnesses...LOL

-Sean

[69projectKAOS]

this is getting pretty damn confusing if you ask me lol, OK ill wait on the harnesses but when you find out let me know because i need to get something in there other than the lap belts for sure. and i cant wait for this jersey auto-x / road course to go down, its going to be sweet!! thanks again -Dom

[69projectKAOS]

srry re-posted it^

[king427]

LOL! Carlos is doing fine.

[69projectKAOS]

hey guys, i went out and took some nice shots today with my brother and a few friends. the drag strip spot is actually a fireman qualifying track and the others are from the runway at the Grumman`s airport in calverton. im hoping i can catch up with vin68 and a few other guys soon when the spring comes to get some nice shots! -Dom
https://static1.pt-content.com/images/pt/2010/12/5236883136_754d74313e_b-1.jpg
https://static1.pt-content.com/images/pt/2010/12/5236290351_35bdbd8ecd_b-1.jpg
https://static1.pt-content.com/images/pt/2010/12/5236880490_77663fda54_b-1.jpg
https://static1.pt-content.com/images/pt/2010/12/IMG_2182chopped-1.jpg
https://static1.pt-content.com/images/pt/2010/12/IMG_2163Photoshopped-1.jpg

[Mr.VENGEANCE]

dom... those shots are the shoots of shots for shoot..

hahahah

strait to the STRFYTR site they go..

[69projectKAOS]

THANKS VENG! i hope one day i can get a magazine spread, or even a small picture i one. that's one goal i have for my baby.My car is girlfriend #2 she gets most of my money and time along side the real girlfriend, is that cheating !?? lmao . thanks again-Dom

[srh3trinity]

Great shots and I really like the new signature picture.

[absintheisfun]

Nice shots---what red is that?

[69projectKAOS]

Great shots and I really like the new signature picture.
thanks, im trying to figure out how i can get a few pictures in one signature , which would look a little cooler lol but thanks -Dom

Nice shots---what red is that?
the color is 72 Apple red , its a gm paint code i got off a 1985 chevy p/u my dad has. it took a while to find a color i liked lol thanks -Dom

[Bryce]

Cool pictures!

[Vinz68]

Pics look great!! Next time you head over there give me a shout.

[Rybar]

Car looks great, nice job on the car and the photos

[69projectKAOS]

https://static1.pt-content.com/images/pt/2010/12/5239473614_07b0113a38_b-1.jpg
https://static1.pt-content.com/images/pt/2010/12/5238874441_485ddd192d_b-1.jpg
https://static1.pt-content.com/images/pt/2010/12/5238872895_cd738b8dfc_b-1.jpg

[1970 TT Rustang]

wow the headers must drag!!!

[69projectKAOS]

Pics look great!! Next time you head over there give me a shout.
i sure will! i want to see those gorgeous cars of yours lol


Car looks great, nice job on the car and the photos

thanks, i love your car as well it looks killer

wow the headers must drag!!!

just a little lol, not as much as you would think though. im looking for some new tires so im probably going to start running a bit taller tire and maybe bring the front up a little. thanks everyone.-Dom

[Mr.VENGEANCE]

damn getting better and better with the pics!

[69projectKAOS]

thanks veng, trying my best. my younger brothers are a big help in showing me how to get better on the editing actually lol. what headers did you run on your car Vengeance? because i saw you had a thread about it and mine are just like yours were. im only like 1inch from the ground which sucks. -Dom

what do you guys think of this new look i was thinking about doing? im not the best at photo shop at all so forgive me, but you get the jist of what im going for..
https://static1.pt-content.com/images/pt/2010/12/5241802999_fa36f6c912_b-1.jpg

[1970 TT Rustang]

iam not a fan of the dark lips. polished looks way better on the lips

[Vinz68]

Being that you still have some chrome on the car the polished lips look good. But I do like all black.... Tough call

[69projectKAOS]

im actually doing a few more things when it gets warmer out which get rid of the aluminum pieces on my car. so idk i think it will be sweet lol and the only few aluminum pieces i have are the window trim and door handles.-Dom

[LV42DAY]

nice camaro. what size are the wheels?

i was thinking i really like the all black wheels but i think if you do paint them, maybe you should try a matte or flat black finish or flat black center and gloss black lip. personally i think all gloss black doesnt do it for me unless the lips is polished or chrome. to me if you paint an entire wheel black it would be because you want the stealth look and flat black is stealth all day long.

all in all, the red and black contrast is among my favorites. look up the culture shock camaro, its a 67 not a 69 but either way there are some photos of it, red car with all black wheels. i think the centers were flat black with a gloss lip.

http://www.lateral-g.net/forums/showthread.php4?t=18411 (click here for the culture shock camaro)

keep up the good work, it looks great so far.

[69projectKAOS]

hey guys,
time for some updates. i recently decided that i was sick and tired of my old th350 setup so i went onto the almighty craigslist hahaa and started to look for a t56 swap. and the search was on, i ended up finding a complete swap from a guy in Rhode island. with the swap i got LT1 T56(56k miles), stock LT1 bellhousing, all the hydraulics, lt1 flywheel, pressure plate, New throwout, Brand New Hay's Hd clutch, fork , Hurst short throw shifter. I know i cant use the stock lt1 flywheel with my 2pc rear main seal so i have to call up Keisler tomorrow and see if they have something that will work for me. other than that from what i read the swap is pretty much bolt up and go. Once i get the flywheel i can get the trans in and measure my drive shaft to have it shortened. I also bought the DSE Clutch master cylinder bracket and a new stock clutch/brake pedal assembly. The pedals and DSE bracket will be in tomorrow so i will post up some more pics when i get it finished. -Dom

[LV42DAY]

that trans will pay for itself from the gas money you will be saving. plus you driving it will be a little more entertaining :)

[Vinz68]

Cool! It's gonna be a blast to drve with the 6 speed

[sr73bu]

Awesome Dom! When I swapped to a stick (4-speed) a few years ago it made my car so much more fun to drive... now if only i had an overdrive...lol
Good luck with the swap!

-Sean

[69projectKAOS]

that trans will pay for itself from the gas money you will be saving. plus you driving it will be a little more entertaining :)
yea i hope so, my car isnt that bad the way it was on gas. but i deff think it will be alot better for cruising.


Cool! It's gonna be a blast to drve with the 6 speed
i cant wait!! i was getting soo bored of auto you have no idea!


Awesome Dom! When I swapped to a stick (4-speed) a few years ago it made my car so much more fun to drive... now if only i had an overdrive...lol
Good luck with the swap!

-Sean

thanks sean, im having trouble with the hydraulic setup mounting it to the pedals even with the DSE clutch master cylinder plate. :(

[mike a]

thanks sean, im having trouble with the hydraulic setup mounting it to the pedals even with the DSE clutch master cylinder plate. :([/QUOTE]

If you need help let me know.

[69projectKAOS]

^^^ Mikea, where are you from on L.I,? and thanks but i think i figured it out, i found a company called street and performance online and they have the same bracket as DSE makes and they actually give you a drawing of how you need to mount the tab on the clutch pedal and everything, even down to how many degrees the tab has to be at! i also had to go get a new clutch master cylinder because the one i got with the swap was bent and had a leak so might as well go all new while it out and easy to get to. here's the pic i was referring too.
https://static1.pt-content.com/images/noimg.gif

when im all done i am going to try and get a sticky thread made on how to do this, because i know there are so many people out there including myself that are looking on the correct way of doing this. as well as the lt1 t56 swap too. thanks for looking guys, ill try and have some pics up tomorrow of what i got accomplished! -DOM

[69projectKAOS]

hey guys, so my hydraulics are done and mounted as well as my pedals. like many of you know i had to tweak the pedals a little to make it mate to the clutch master push rod. im not the best welder but im pretty sure it will hold lol. and the wires are out of the way now after i did the final install of the pedals and return spring etc. i used a adjustable pin so that the push rod could spin on it, i only used the second hole and cut the rest off so it wouldnt get in the way. the pedals look great and with that tab welded on the work great as well. im just waiting on my flywheel to mate my lt1 t56 to my early sbc.
https://static1.pt-content.com/images/pt/2011/02/IMG00560201102201258-1.jpg
https://static1.pt-content.com/images/pt/2011/02/IMG00556201102201216-1.jpg
https://static1.pt-content.com/images/pt/2011/02/mypedals2-1.jpg
https://static1.pt-content.com/images/pt/2011/02/mypedals-1.jpg
heres a pic of the trans after i cleaned it up and checked it over.
https://static1.pt-content.com/images/pt/2011/02/t56-1.jpg
i cant wait to get the 6spd in!! every day i look at it i get even more anxious to drive it ahaha:6gears: thanks for looking everyone, i will update more when im putting the tranny in. -Dom

[RicerwannaB]

Awesome build man! I love it, I cant wait to start mine!

[69projectKAOS]

Awesome build man! I love it, I cant wait to start mine!

Thanks!!! what do you have ? -Dom

[srh3trinity]

Nice upgrade.

[69projectKAOS]

WELL LADIES AND GENTLEMEN, Tragedy has struck but the outcome will decimate all! haha to make a long story short. i installed my t56 and let me tell you it was a blast!! but my 383 didn`t quite agree. somehow about two months later i started my car in the driveway and let it idle when all of a sudden it went kaboom:drive2: so i turned it off to access the situation and nothing seemed out of the ordinary so i tried to crank it over which it did . it fired up, popped again then stalled. after that it seized and cracked the starter. sooo we yanked the motor to find the number 6 cylinder had cracked due to a nut in the combustion chamber. let me remind you that this is the same cylinder that has detonated 2 pistons already and forced me to have it rebuilt both times. so i gave up :crying: i contemplated selling it and getting something more modern but with some persuasion from my family and friends shes here to stay!
So that brings me to where i am now, i ditched the idea of a crate motor and i decided to go nuts. with having two brothers who have Supras and a brother who has vast knowledge of them inside and out i decided to go out on a limb and go 2JZ! :ssst: My brother had a spare 2jz laying around with 65k miles on it so we tore it down and started to build her for some boost!

heres the block torn down
https://static1.pt-content.com/images/pt/2012/01/6440219707_601dfa43ec_z-1.jpg
new oil pan and drain fitting
https://static1.pt-content.com/images/pt/2012/01/6440219547_ac83b87dcb_z-1.jpg
wrinkle finished valve covers and lower intake manifold runners
https://static1.pt-content.com/images/pt/2012/01/6440219773_ef64a29539_z-1.jpg

i was able to get the head studs in the block today with some help of my gf:bigthumb: , i also pulled the harmonic balancer and got the water pump and timing belt off. unfortunately i got the wrong water pump(idk how lol) so i had to get the right one, and stop at the dealer to get the head gasket so i can start to put her back together.
got the ARP head studs in
https://static1.pt-content.com/images/pt/2012/01/6450781087_a72c91e905-1.jpg

got the headgasket, timing belt,new water pump, and head back on
we made some progress. i was able to get the new water pump, tt headgasket and most of the gaskets for the motor. my brother was nice enough to go ahead and torque down my head for me. we installed the cams
https://static1.pt-content.com/images/pt/2012/01/6511132027_2c4ebf3b6f_z-1.jpg
https://static1.pt-content.com/images/pt/2012/01/6511131967_919b8ba487-1.jpg
https://static1.pt-content.com/images/pt/2012/01/6499988527_350aab8fcb-1.jpg
installed the valve covers and manifold
https://static1.pt-content.com/images/pt/2012/01/6499992391_fddc9f8ae9-1.jpg
GARRETT 67mm turbo installed with dizzy, its practically touching the dizzy and valve cover so i cant even run a filter, oh well looks like im deff going AEM standalone ecu (there will be some sort of filter on there no worries lol)
https://static1.pt-content.com/images/pt/2012/01/6499988507_78864260c4-1.jpg
https://static1.pt-content.com/images/pt/2012/01/6499988473_d90e4790f5-1.jpg

i didnt like the way the n/a coil cover didnt cover the spark plug gulley completely so i cut out a piece to cover it out of thin sheet metal i had .
https://static1.pt-content.com/images/pt/2012/01/6511132075_3c6daf35d6_z-1.jpg
then i sprayed it to match the body color of my car , it actually came out nice. im trying to keep things lean and hidden for my build as much as possible. i also just put my lower runners on to see how they looked with the n/a rail with tapped fittings. im going to be ordering the intake stock in a few days to finish that up as well.
https://static1.pt-content.com/images/pt/2012/01/6514142925_9d436211b9-1.jpg
https://static1.pt-content.com/images/pt/2012/01/6514142965_e7627d7062_z-1.jpg
https://static1.pt-content.com/images/pt/2012/01/6514143021_3dd5fbddd4_z-1.jpg
53452
53453
53454

i will have some more updates soon, please keep the hating to a dull roar lol :rotfl:thanks for looking-Dom

[sr73bu]

BOOOO!!!! **throws rotten tomatoes** BOOOO!!!


hahaha! Just Kidding man!.... I think this going to be really cool! Are you going to run the t56 again or a Toyota trans? Either way Good luck!
Hope you have this done soon,,, Maybe this year we could meet up for a cruise...just installed a t56 in my chevelle so its ready to cruise.....

-Sean

[sixfivepost]

Now that is definitely different! Are you going to rebuild the 383 again?

[69projectKAOS]

BOOOO!!!! **throws rotten tomatoes** BOOOO!!!


hahaha! Just Kidding man!.... I think this going to be really cool! Are you going to run the t56 again or a Toyota trans? Either way Good luck!
Hope you have this done soon,,, Maybe this year we could meet up for a cruise...just installed a t56 in my chevelle so its ready to cruise.....

-Sean

Hahahaaa i was kind of reluctant to post it on here because i really didnt want neg feedback on it but oh well, lol im not going to hack the car up at all. im going to keep it so that i can go back to a sbc at any time. im actually running a R154 which is like the toyota version of the t56. its a 5 speed trans and can handle up to 750hp range, some guys even push more hp than that. im hoping to be done before the summer, so we can meet up at a autox or something. i saw your build thread and the car looks great, i love the color! i bet you love that t56 lol


Now that is definitely different! Are you going to rebuild the 383 again?

Thanks, i have the 383 sitting in my garage all dis-assembled, i dont know what im going to do with it. i will probably keep it because it the original motor to the car. I think the damage is too extensive .-Dom

[19,69camaro]

Dude thats awesome. I always liked the culture shock camaro now your making its big brother! What are you expecting for #s

[Mr.VENGEANCE]

fuchket, do it..

[nicke]

I like it! Cant wait to see that toyota engine in its new home!

[69projectKAOS]

Dude thats awesome. I always liked the culture shock camaro now your making its big brother! What are you expecting for #s

Thanks! yea i like the EVS camaro alott, the funny thing is i had my car set up almost identical to theirs without even knowing of it lol until my brother saw it on the web and thought it was my car lmao. EVS say they are making close to a 1000hp but i dont think thats right. i think they are making close to 600 +hp. for my car im gunna shoot for 650-700hp,....will that stick to the ground !? oh hell nooo but it sure will be fun to drive! hahaha


fuchket, do it..

Hey Veng, can i still be in the club?? ;) My car is gunna be American muscle , but with the heart of Japan. i kinda thought you would agree with me because you like American muscle and jdm. -Dom

[BBSkylark]

Absolutly love it! The Stance, the colour, the accents. You pulled this one off real nice its right up my alley! Good luck with the 2J swap im interested to see how it goes! Time to put some serious power to the ground and show your brothers who's boss lol.

[69projectKAOS]

HAHAAA THANKS!!! I contemplated many times on how i wanted it to look and im happy for now lol, but she is always changing and will definitely be different soon ;) . my brothers supra is a bit of a beast even though he is in the process of building it now as well.....soooo he will probably beat me but thats all good in my book though. i just want something that will shock people and be balls fast and also reliable to boot lol. My brothers joke and say that the only things on the car that are going to break now are the chevy parts!!:lmao: i hope nothing breaks loose but the tires, haha but we will see. thanks-Dom

[Mr.VENGEANCE]

shoot.. its gonna piss off some folks.. but i cant remember when anyone with a Streetfighter didnt piss off some folks a little.

as long as you can "get down" go for it.

[69projectKAOS]

picked up a Comp Engineering tank sump and a Innovate wideband gauge

53626

[LV42DAY]

sick. run what you got. i love different. im sure you have seen the camaro named "culture shock" if not google it or whatever. thing made headlines world wide with its 1000HP 2jz and beautiful interior. sorry to hear about the old motor issues, but i am sure with a little patience you will have something nasty in the long run.

[69projectKAOS]

sick. run what you got. i love different. im sure you have seen the camaro named "culture shock" if not google it or whatever. thing made headlines world wide with its 1000HP 2jz and beautiful interior. sorry to hear about the old motor issues, but i am sure with a little patience you will have something nasty in the long run.

thanks!! yea I've seen the culture shock camaro, it looks great i love the interior. my car isn't gonna be as flashy, its gonna be all Go!! I'm going to have a cage put in when i get it moving again. i can't wait till it gets nice out here in ny so i can work on it a lot more. I'm going to sump the tank within the next few days hopefully, and run some fuel lines on the opposite rail away from the down pipe. -Dom

[rickpaw]

Cool idea. Some thing different for sure. Make sure to take a lot of pictures of the swap. I'll be watching this thread.

[sokoloka]

Looks great! It's got to be hard to make a 69 look bad.
Random question - might be a quick google away as well but - do you know what the backspacing and width of the original Camaro steelies are?

[69projectKAOS]

Cool idea. Some thing different for sure. Make sure to take a lot of pictures of the swap. I'll be watching this thread.
I sure will! Ive been busy with work and studying so shes on the back burner for now but im still accumulating parts.-Dom

Looks great! It's got to be hard to make a 69 look bad.
Random question - might be a quick Google away as well but - do you know what the backspacing and width of the original Camaro steelies are?
thanks!! unfortunately i dont know the spacing. like you said its probably on google. or you can search it on here in the wheels and tires section. -Dom

[solarguy09]

Hello... I don't know how I missed this Killer Build....But i did.

Nice Job on your car...Paint, stance, wheels, ect....

And The engine, well.....It was time to put in one of those new motors and tranny's that everyone talks about..

It should be interesting to see what you think.

I am still running the 350LT-1 and 4 Speed and I have modified the rest of the car..except the interior.

I will be following to see how it goes, and how you feel about the difference..

[69projectKAOS]

Ill just leave this here :drool:
https://static1.pt-content.com/images/pt/2012/03/6824085310_b820437b91_z-1.jpg
https://static1.pt-content.com/images/pt/2012/03/6824085350_58650b77d2_z-1.jpg
https://static1.pt-content.com/images/pt/2012/03/6970206763_8188d535ac_z-1.jpg
https://static1.pt-content.com/images/pt/2012/03/6970206791_9446451431_z-1.jpg
https://static1.pt-content.com/images/pt/2012/03/6824085438_df532542c2_z-1.jpg
https://static1.pt-content.com/images/pt/2012/03/6970206873_bae9bf9736_z-1.jpg
ENJOY:naughty:

[CruizinKev]

cool swap! funny to see some japanese cars with LS1 swaped in and now your camaro the other way around..

[sr73bu]

AWESOME DOM!

-Sean

[Chris02rex]

Isnt this thing done? I swear i've seen videos of it on youtube.

[bonecrrusher]

Dom - you need one of these:

https://static1.pt-content.com/images/pt/2012/03/vin-1.jpg LOL!

Car is looking badass like always.

[Vicinity]

Only doing a single turbo? I demand a dynosheet once she's running!

Just out of curiousity, are you keeping the T56, or selling it? I'm still looking for one. :)

[rickpaw]

Now that's something I don't see every day. Any pictures of how you fab'ed up the motor mounts?

[69projectKAOS]

got some more stuff finished up, got the motor mounts fabbed up and radiator mounts done as well, i was able to sump the tank and i also wrinkle finished the intake manifold. i also removed the a/c suitcase on the fire wall by the turbo so i have more room and made a plate to cover it all up. heres a few cell phone pics ill get the ones off the camera soon. I'm just waiting on a 1jz bell housing and clutch setup and she can be rolling sometime in the near future hopefully!!! thanks for looking -Dom

https://static1.pt-content.com/images/pt/2012/04/6946042472_0c827fc550_z-1.jpg
https://static1.pt-content.com/images/pt/2012/04/7092110145_a496a33a77_z-1.jpg
https://static1.pt-content.com/images/pt/2012/04/7092110175_7573eccd96_z-1.jpg
https://static1.pt-content.com/images/pt/2012/04/6946042624_c67240c254-1.jpg
https://static1.pt-content.com/images/pt/2012/04/7092110231_7abe2d02d8_z-1.jpg
https://static1.pt-content.com/images/pt/2012/04/7092110263_88dcd8f320_z-1.jpg

[69projectKAOS]

Isnt this thing done? I swear i've seen videos of it on youtube.

thats the EVS 67 camaro they built a few years back. mines almost there just need a few more things and she will be purring! ;)


Dom - you need one of these:

https://static1.pt-content.com/images/pt/2012/03/vin-1.jpg LOL!

Car is looking badass like always.

hahahaaaa thanks, my friends always digg up the old F&F quotes when we turn some wrenches. they say I'm a mix of both vin and paul lmfao


Only doing a single turbo? I demand a dynosheet once she's running!

Just out of curiousity, are you keeping the T56, or selling it? I'm still looking for one. :)

ohh you guys will deff see a dyne sheet and videos one she's done!!! thats a promise. yea i decided to go with a single setup its a 67mm garrett with a 37mm dial waste gate, 850cc injectors, 105mm throttle body, tito racing intake (wrinkle finished ) , r154 5-speed transmission(toyota) and 3.73 gears out back. i gotta get some new wheels probably in a 16'' or 17'' so i can run a wide radial, because this little baby is gonna be all over the place! hahaaa i actually sold the t56 a while back to some local guys on craigslist:/


Now that's something I don't see every day. Any pictures of how you fab'ed up the motor mounts?

yea its definitely something i wanted to build as well because i know that EVS motorsports has the 67 camaro with a 2jz in it but as far as i know i have the only 69 camaro with one. i actually have some on my camera that i will upload, it was actually surprisingly easy. i used the original sbc350 mounts that attached to the frame and then welded a inch and a half thick plates to the top of them and re-enforced them and then drilled a hole throughout those and used the existing mounts from the 2jz motor and bolted then together!!! and i made sure i had my angles all lined up spot on. thanks for looking guys i will keep the pictures coming! -Dom

[LV42DAY]

how is the build coming?

[69projectKAOS]

So far the build has gone great! Heres a shot of the car with my brothers trd widebody supra. And a few under the hood as of the other day. And my new all aluminum 3" custom drive shaft to mate up to the r154 toyota trans. The problem now is that the car cranks but i cant get spark!!

[turboclevor]

wow that is awesome, you probably already said it but how much boost are you running with the new motor?

[69projectKAOS]

I have a 15 psi spring in my wastegate , and manual boost controller so maybe a little more than 15 or so.

[96t/acj]

With out being to much in your business, about how much do you have in this install? Pic of the engine mounts? I have a 69 and really want to follow your lead!

[69projectKAOS]

I got alot of my parts from my brothers supra when he built his supra. I had to buy a new clutch setup, transmisision, fuel system, intercooler ,gauges, turbo, manifold ,custom intake, injectors, and there was a bunch of custom modidifying the trans crossmember , intercooler piping, radiator support brackets, and motor mounts. The motor mounts are the original sbc bottom half's that bolt to the frame and then i welded 2" thick pieces of metal to extend them to meet up with the stock 2jz motor mounts and bolted them up. It wasnt too hard , just getting the pitch right was a pain in the ass. Ill try and get pics. -Dom

[Mr.VENGEANCE]

YEA!!!!!!

go lil homie.

[AusMarty]

So - now you have a Camaro.

Can I have your Supra?

HAHAHA
Looks AWESOME mate.

[69projectKAOS]

^^^ I always had my camaro since i was 14 , my two younger brothers have supras and i always wanted one so i combined two of my favorite cars and made what you see today.the sexxy/mean looks of a 69 camaro and the performance of a supra. Lol -Dom

[AusMarty]

haha - The fact you put a 2JZ into a Camaro is AWESOME.

900+HP without even taking the head off.

Gotta love that. haha.
It's lighter than a Supra too isn't it?
If not - then not much heavier.

Would LOVE to see the look on people's faces when you say "No V8" - pop the hood and there stands a Toyota Motor in all it's glory and all the hillbillies will retort with "THE F&%$ IS THAT S%#&?"
haha.
Awesome mate.

[69projectKAOS]

^^^ hahaaaa yea i cant wait to see the reaction on peoples faces too! And the sound of the car when i accelerate and hit the two-step is going mind F$&k them ! Lol .......cant wait! :) my goal is to try and get it into one of the tuner magazines and get it out there for everyone to see. Ive seen mazda miatas with the LS series swaps in the magazines , so i dont see why they wouldnt want a spread of it when its finished. -DoM

[Grim]

Suparo or Camara? Interesting build!

[turboclevor]

Suparo or Camara? Interesting build!

what about camaro supra sport

[69projectKAOS]

^^ i was thinking about having custom badges made up for the grille and tailpan !! lol funny u say that ....they will say
SS
Supra Sport
But it will look Just like the old ones but if you look close enough you will notice!

[cactuss4]

I had to come to this old thread, as I saw a recent post with your car as your sig, and loved the look. So what happened this is 9 months old, so wondering if you made some progress??

Thanks love the car!!

Tory

[68firebird]

no kidding, its been awhile.

[boostin05blacksti]

Any updates? I loved this long ago.