PDA

View Full Version : anyone with BBC AFR heads



kman67rsss
08-22-2004, 06:58 PM
I have a problem, i have AFR 305 magnum heads, and the ARP head studs that were sold to me are too short on the 4 that come through closest to the exhaust ports on these heads. i am looking for the correct PN for this application, i have 235-4201 and as stated above they dont work. i will call AFR in the morning but thought id post here first. thanks

zbugger
08-22-2004, 07:01 PM
Did the heads come with a specs page? My sportsman II's did and they told me everything that I needed....

08-22-2004, 08:26 PM
AFR will tell you everything you need to know.

whytry
08-23-2004, 01:23 PM
I have AFR heads on my motor, I was told by AFR to get ARP bolts that are longer by about 3/4" if I recall. They are pretty good with getting you the right parts...

kman67rsss
08-23-2004, 05:11 PM
talked to them today and they told me to get ones for the dart pro 1 heads. the panflet i have says standard studs/bolts so we interperted it wrong. o well