PDA

View Full Version : Stainless Works BBC headers 69 Camaro



EFI69Cam
03-07-2005, 09:37 AM
Anyone using these? I'm thinking about getting a set of their 2" headers to replace the mid length hedmans I have now. My car is dropped 2" and ground clearance is quite important to me.

69lt4
03-09-2005, 03:36 AM
I don't have their BB headers. Their headers on my LT4 are nice and close to the floor. I spoke to them a few times prior to purchasing. They were able to assist me.
Kevin

USAZR1
03-09-2005, 02:43 PM
If I ever switch to a big block,Stainless Works is probably the way I'll go.
What are your thoughts on the Hedman's?

EFI69Cam
03-10-2005, 09:45 AM
If I ever switch to a big block,Stainless Works is probably the way I'll go.
What are your thoughts on the Hedman's?

The hedmans fit OK, the steering arm on the PS box has dented one of the tubes.
The concern that I have is that I am leaving HP on the table because of the short, unequal length 1 3/4" primaries.

I have a set of Dynatech long tubes on my 99 Corvette, they fit beautifully, and I got to thinking that someone has got to be able to make a set for a 69 Camaro that fit that well. They also gave a huge lower end increase, that increased the fun factor of the car in a big way. The long tube design is excellent for street cars.

Tiger
03-10-2005, 11:00 AM
How are the prices from stainless works ???

Thanks!
André

USAZR1
03-10-2005, 07:28 PM
How are the prices from stainless works ???
Thanks!
André

A pair of 2" BBC headers from Stainless Works retails for approx $600. They can build you what you want,within reason. I was thinking about a pair of 1 3/4" or 1 7/8" tubes with 32" primaries and 3" collectors.