PDA

View Full Version : Clutch arm stroke



Tiger
03-02-2005, 01:30 PM
Hi,
Does anyone know whats the stroke that the clutcharm is supposed to travel to totally release the clutch?

My plan is to use a Camaro/Firebird slave cylinder, which roughly measured have 1-1 1/2" stroke.
I have a lakewood bellhousing and clutch arm but it looks like the clutharm on the t-5 (camaro) bellhousing have another ratio (read travel a minor distance at the slave end to move tha same amount at the release bearing end).

any help appreciated
Thanks André