hotwheelsboy28
11-22-2008, 10:38 PM
hey everyone! i live in east tn, near chattanooga & i have a t-5 (14 spline input shaft) came out of a 2nd gen camaro. my ? is does anyone know a honest shop in my area to build it for me at a reasonable price? i know it's a slush box but i live on an almost non-existent budjet for my ride at this time doing all the labor myself to save $$$ and plan to replace it later with a tremec tko.
my car is a 79 malibu with a fresh stout .060 over 350 (that i built), 4:10 posi , new headers, 2.5 alumized exhaust with x pipe & flowmasters and lots of other new parts. also fabbed in late model honda civic buckets, 1995 up monte carlo dome light,rear view mirror with maplights pwr trunk release etc etc...
i give it hell every now and then without any problems except traction. i mainly just cruise it's a blast to drive! but slowly building my deam machine one piece at a time without the comforts of a garage.
(sorry for the long read) thanks for any help, jon
my car is a 79 malibu with a fresh stout .060 over 350 (that i built), 4:10 posi , new headers, 2.5 alumized exhaust with x pipe & flowmasters and lots of other new parts. also fabbed in late model honda civic buckets, 1995 up monte carlo dome light,rear view mirror with maplights pwr trunk release etc etc...
i give it hell every now and then without any problems except traction. i mainly just cruise it's a blast to drive! but slowly building my deam machine one piece at a time without the comforts of a garage.
(sorry for the long read) thanks for any help, jon