V - belt P/S pulley

[Takid455]

are there pulleys for the GM P/S pumps that have different offsets? I need on that moves the center of the belt groove 5/16" forward compared to a standard pulley from a Saginaw pump from a 2nd gen f body. I am switching to a Type II pump and the distance from the bracket mount to the face of the pumps differ 5/16". I am doing this to a pontiac engine so of course I have to make the brackets.

[sik68]

Typically, the fore/aft adjustment comes from the bracket itself and not from the pulley. So the bracket you're making could just compensate for the misalignment.

I don't know much about pontiacs engines, but you might want to check out www.unisteer.com , which is where I got my Gen II bracket.