Best "affordable" wheels??, other than Coy's)

[The T-man]

OK, I know $3K or 4K+ for 4 wheels is nothing to some guys,
but there's GOT to be some wheels out there for around $300-$400 per wheel that are nice.
any suggestions, links? <<<
(And yes I've looked at Coy's, waiting for them to make 18x10 in a certain style I like):)

[XLexusTech]

I like these and thier in your Budget

http://www.vintagewheelworks.com/products/wheels/v60

[ProdigyCustoms]

We have a Bonspeed special purchase and are doing a full set of 18" Bonspeeds for $2200. While not $300 or $400, still a killer deal on truly custom wheels. $300 to $400 is going to push you into Foose, Boyd, American Racing, All high volume production wheels.

[Boesch]

We can do our Intro endless series for the following prices for a set.

17's - $1195 (8 and 9.5 inch widths with any custom backspace)
18's - $1495 (8 and 9.5 inch widths with any custom backspace)
20's - $2095 (8 and 9.5 inch widths with any custom backspace)

http://www.introwheels.com/endless_1.shtml

The difference between the endless series and the other series are the limited styles and they have a stepped lip instead of the rolled lip.

I can also do 17's in abut any of our styles, which all have rolled lip rims, for just a hair over $400 a wheel. 18's in most any style we offer will be a little under $500 a wheel. PM me if you have any questions.

Dustin

[DriverzInc]

We have the Billet Specialties SteetLites that are a fully forged 6061-t6 wheel for an amazing deal. They are also super light, and great for performance.

https://static1.pt-content.com/images/noimg.gif

With our 10% off sale this month, they are 1098/set for 8s and 9.5s!

[GeoffP]

ROH is a good choice for decent wheels for a good price. I ended up with about $1400-1500 in the set of ROH Snyper's including Sumitomo tires from Andris Skulte (Skulte.com I think). I'm running 8's and 9's with 245/45's up front and 275/40's in the rear (68 Camaro).

Hope this helps!

[cdoggy81]

What Coy's are you looking for in a 18x10?

[bkeith65]

I have been very happy with the quality and service at Boze..ought to have a look at their site..they have tons of cool styles and the owners are very easy to work with!:headbang: I got my wheels with custom offset in about 3 weeks flat..

[65impSS]

bOSS

[65impSS]

Boss wheels came out with the 338 it looks similar to the torq thrust wheel. They come in 18 inch and are from 600 to 800 for all 4 wheels

[65impSS]

111

[Scatpack]

I've always been curious as to what a set of Boze wheels would run a guy. I mean I'm not talking anything wild, just a 17 or 18 inch wheel that's 8 and 10 inches wide and I guess would be a custom offset and all that jazz. They look awesome, I'm just wondering about the cost.

[Tucks69]

Newstalgia Wheel has the prices on there website. That is what wheels I want to go with, but I don't see any 11 inch wide wheels listed on there website. I will give them a call and check when I get to that part of the project!!

[Jarcaines]

111

Those are killer. I like that.

[mone]

Those Boss wheels like better than Foose..im gonna find some pics of em.

[buickfunnycar.com]

Newstalgia Wheel has the prices on there website. That is what wheels I want to go with, but I don't see any 11 inch wide wheels listed on there website. I will give them a call and check when I get to that part of the project!!

That's because anything over 10" is a special order...and figure BIG bucks to widen them.Look again at their site and you'll get an idea of what the upcharge is...figure about $400/wheel to go from 10" to 11".

Newstalgia may offer free shipping but they may not be your best value in the long run.I have found their fitment advice somewhat lacking...there are so many other options available to you sponsoring this board,Jon Henson @ www.driverzinc.com being one of the best.

[65impSS]

I think the boss wheels look better than the coys i seen pics of a wheel with knock off similar to the torq thrusts ill try to find more pics .

[65impSS]

chrome

[Mr.VENGEANCE]

co-signed on the boss wheels..

if youre not looking to roadrace or get looney with them then they are your best bet i think.

[65impSS]

wheels

[65impSS]

........

[TonyL]

LOL. I like the Boss wheels also. I Really dig how they worked the center section of the wheels, and brought a new flare to the spoke design. Its hard to redo the famouse TTII, but I think i like this variant best. Even compared to my beloved Coy's.

[mone]

It seems they only come in 18in with 9.5 being the widest...hmm..woulda liked to have some bigger sizes at least a 20x10 version for the deep lip

[Mr.VENGEANCE]

co signed on the 20s.. i would have a set just on good principle because of that..

[N2TRUX]

Boss said they are considering them in 20's. That could mean sooon, or never...:(

[cdoggy81]

65impSS,
Can you do a rendering of my project car?
:) LOL!!!!

[CliffsBlueCamaro]

http://www.bossmotorsports.com/wheels_detail_specs.cfm?id=408 <--Tech Specs on the Boss Wheels with Backspacing/Offsets.

(Seems like the offset is a little low for the 9.5" rears - at least for a 1st gen.)

[woody80z28]

Where can you pick up a set of Boss wheels? I kinda like those.

Ooooh, the backspacing is a little tight for an f-body though. Damn.

[Throttle]

I bought my Boyd Coddington Rebels for 1900.00..

[79_GBody]

They're are a few sets of 18's on ebay rangeing from $645 - $995 with black being the cheapest and costing the most. But like everyone has been saying the backspacing is limited. I snagged a few pics too so you guys could get a better idea of what they look like.
https://static1.pt-content.com/images/pt/2008/11/338_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_2-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_CHROME_1-1.jpg

[Mr.VENGEANCE]

damn.. hate to admit it.. but they kicked FOOSE's ass...

or.. chinese fu-su's ass..

[BADNBLK]

damn.. hate to admit it.. but they kicked FOOSE's ass...

or.. chinese fu-su's ass..

Agreed! I like the grey ones.

[The T-man]

great suggestions so far, man keep the pics coming
any others ?

[Dream68]

TSW's make a good wheel just put a set of 18'' on a 67 camaro and they turned out really well. They go fo around $275 a wheel. Good luck

[ed1le]

They're are a few sets of 18's on ebay rangeing from $645 - $995 with black being the cheapest and costing the most. But like everyone has been saying the backspacing is limited. I snagged a few pics too so you guys could get a better idea of what they look like.
https://static1.pt-content.com/images/pt/2008/11/338_1-1.jpg




I've seen these on there & was curious about their quality. They look just like the 1-piece American Racing wheels. This style/color is what I think I'm going to end up going with.

[b-man]

I chose a set of 18X9 O.Z. Racing Ultralegerra wheels for $358 each. I bought BMW-spec wheels (5 on 120mm bolt pattern, 40 mm offset/6.57" backspace), these ones are for the rear fitment on a '08 Z4 roadster.

Up front I'm using a 1.063" thick adapter to give me the correct backspacing and to adapt the 120mm BMW wheel to the 120.65mm GM brake rotor, in the rear the axles will be drilled and studded for the 120mm pattern.

You can get them in a variety of painted finishes, bright silver, gold, matte graphite and black (like mine). A high-quality cast wheel (designed and made in Italy) that's lightweight, only 20.8 # for the 18X9 and 18.6# for the 18X8 size.

If you want a wheel with a wide or polished lip, these definitely aren't for you. If you're into painted wheels that can be cleaned up quickly with a wash mitt and don't require constant polishing to keep up, you might consider something like these.

245/40-18 fronts (25.7" tall).

https://static1.pt-content.com/images/pt/2008/12/OZRacingBlackpaintedwheelsfor64T2-1.jpg

https://static1.pt-content.com/images/pt/2008/12/OZRacingBlackpaintedwheelsfor64T3-1.jpg

275/40-18 rears (26.6" tall).

https://static1.pt-content.com/images/pt/2008/12/OZRacingBlackpaintedwheelsfor64T5-1.jpg

https://static1.pt-content.com/images/pt/2008/12/OZRacingBlackpaintedwheelsfor64T4-1.jpg

[g356gear]

They're are a few sets of 18's on ebay rangeing from $645 - $995 with black being the cheapest and costing the most. But like everyone has been saying the backspacing is limited. I snagged a few pics too so you guys could get a better idea of what they look like.
https://static1.pt-content.com/images/pt/2008/11/338_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_2-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_CHROME_1-1.jpg

It's too bad the only have 18's and 20's, and the 20's in nothing wider than an 8.5" wheel.

[NvrDun71]

http://www.lateral-g.net/forums/showthread.php4?t=17558

[Bow Tie 67]

I picked these up on ebay for $474 shipped to my door. ( edit: that price is for 4 rims ) They are 17" x 9.5 corvette style rims, powdercoated with a stainless lip and a three piece look. They have larger sizes that cost more. These will be my track day rims.


https://static1.pt-content.com/images/noimg.gif (http://good-times.webshots.com/photo/2873375460065608932ILZHOE)
https://static1.pt-content.com/images/noimg.gif (http://good-times.webshots.com/photo/2962323860065608932ghTaqw)

[ed1le]

It's too bad the only have 18's and 20's, and the 20's in nothing wider than an 8.5" wheel.

American Racing makes similar wheels available in 18x10 and 20x10...

http://store.summitracing.com/egnsearch.asp?Ntt=American+Racing+Torq-Thrust+M+Wheels&searchinresults=false&Ntk=KeywordSearch&DDS=1&N=700+4294923107+4294923105+400082+115&x=31&y=8

https://static1.pt-content.com/images/pt/2008/12/are105m7861b_w-1.jpg

[buickfunnycar.com]

They're are a few sets of 18's on ebay rangeing from $645 - $995 with black being the cheapest and costing the most. But like everyone has been saying the backspacing is limited. I snagged a few pics too so you guys could get a better idea of what they look like.
https://static1.pt-content.com/images/pt/2008/11/338_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_1-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_GREY_2-1.jpg
https://static1.pt-content.com/images/pt/2008/11/338_CHROME_1-1.jpg

Those look very heavy...

[79_GBody]

Most wheels that are that cheap are heavy.

[buickfunnycar.com]

Most wheels that are that cheap are heavy.

yeah...sorta defeats the purpose,huh?:bsjerk:

[ed1le]

yeah...sorta defeats the purpose,huh?:bsjerk:

Guess it depends on one's budget...

[buickfunnycar.com]

Guess it depends on one's budget...

Guess it does,I just made it a point not to run any off-shore wheels on my American car(s),so the sets I have are all forged here in the US,So Cal matter of fact.Might have cost me more but you truly do get what you pay for.And I do prefer to be different...

[bobhamilton15090]

I run eagle wheels on my mustang and have put them on many cars. They are strong and cheap, and worth every penny.

[65BBODY]

im starting to like the boss wheels myself.

[69LT1Nova]

I like those Boss wheels. Too bad they don't have a wider selection for BS. If they had 18x8 in a 5" BS with a 4.75" bolt pattern, I'd be ordering the grey centered ones right now.

[Mr.VENGEANCE]

man someone buy a set so i can see what they look like on a car!

[69LT1Nova]

man someone buy a set so i can see what they look like on a car!

Bah! I tried to find some contact info for the company that makes these (American Eagle Wheel Corp.) but with no luck. I want to see if they do custom backspacing... for the price, more than likely not... :doh:

*Edit* Ha! I found it. http://www.bossmotorsports.com/contact.cfm

*Edit #2* Bah! The e-mail address is no good. It bounced back to me saying "delivery failed". I guess they don't want anybody bugging them...

[ed1le]

Look into the American Racing wheels I mentioned ealier in this thread
...they look and are priced the same and are a more reputable company that's been around since the dawn of hot rodding...

[buickfunnycar.com]

Look into the American Racing wheels I mentioned ealier in this thread
...they look and are priced the same and are a more reputable company that's been around since the dawn of hot rodding...

Used to be "American" made but now they are just an cheap off-shore shadow of their former self,complete with ill-fitment,inferior materials that won't hold a shine over time,impossibly long build times and horrid customer service.Their quality is no where close to what it used to be.
Do a quick search and learn about the horror stories...

[ed1le]

Does this include the TT2's that everyone and their brother seem to have? They have a full line under Shelby's name, Earnhardt Jr. and own Weld & Boyd Coddington wheels as well. From their site about acquiring Weld - "Along with the brand, we added state of the art forged manufacturing capabilities based in Kansas City, MO., where we continue to produce the best in one-piece and multi-piece forged wheels." Maybe their lower end wheels are made elsewhere with their name on it but I searched on this site & on google and didn't find anything quite like what you described....

[buickfunnycar.com]

I'm not here to stop you from buying polished TT II's,if you want to be like everyone else,far be it from me to interfere.Like I explained earlier,if we're going to argue quality between US forged wheels versus off-shore Chinese wheels,I'm not willing to get involved.

I go back with American Racing to the 60's with the Torque-Thrust D and then later the 200S which were on my '70 Z when I bought it way back when.I recently just sold that set to a friend and he'll put them on his '69 Z/28.

The stories of quality control and customer service are out there,I distinctly remember one guy who purchased a set of AR Salt Flats and one was defective right at the valve stem and he was fed up with having to wait over a year for a replacement getting absolutely nowhere with AR.A friend of mine in AZ bought a set of polished 200S's and he received them in about 6 weeks...but the stories of much longer wait times are more the norm,more like hit and miss.
A much better choice,IMHO is the Vintage Wheel Works line...here you have a classic period-style wheel in sizes that actually fit our cars in terms of widths and b/spacing...and very,very affordable pricing.Jon Henson at www.driverzinc.com is currently offering deep discounts on their entire line before the Jan 1st price increase.

These are some of the best made wheels I own and both owners of the company are two of the nicest guys to deal with.The quality is evident and without question for a few extra dollars,there is no comparison to off-shore made wheels...and I refuse to run off-shore made wheels on classic American made iron.

[HectorM52]

We have the Billet Specialties SteetLites that are a fully forged 6061-t6 wheel for an amazing deal. They are also super light, and great for performance.

https://static1.pt-content.com/images/noimg.gif

With our 10% off sale this month, they are 1098/set for 8s and 9.5s!
Would you recommend these to someone looking to run on a road-track and possibly some autocross? Aren't these drag wheels?

[lower90xcab]

adam go with the boss338s..thats a killer wheel....

[The Stickman]

I just bought the Boss 304's and really like them. They look great. They are 18X9 with +14mm offset and they came in 5X5 bolt pattern which is hard to find anything in.

https://static1.pt-content.com/images/pt/2009/01/100_3055-1.jpg

[FirstGenZq8]

Would you recommend these to someone looking to run on a road-track and possibly some autocross? Aren't these drag wheels?

adam you'll have to PM him as he might miss this thread/post. and boss wheels are heavy, so no.

[hollywood east customs]

hey 69LTINova, i bought front 18 x 8 Boss 338 wheels w/ 5" bs & 4 3/4" bolt pattern for my 69 firebird & 18 x 9 1/2 for the back...havn't fitted yet as my car is at the shop in the process of a drivetrain swap & PT suspension upgrade at the moment. THey are available and do look bitchin...

[DriverzInc]

Would you recommend these to someone looking to run on a road-track and possibly some autocross? Aren't these drag wheels?

Yes, originally drag wheels, now they are being offered in 17" sizes and wider for street/ pro-touring cars. They are 6061t6 constructed, and have no problem performing on the street, or road course. Great wheel and an AMAZING price.

[ed1le]

Do yu have any pics of these in 17"? These are sharp wheels.

[69LT1Nova]

hey 69LTINova, i bought front 18 x 8 Boss 338 wheels w/ 5" bs & 4 3/4" bolt pattern for my 69 firebird & 18 x 9 1/2 for the back...havn't fitted yet as my car is at the shop in the process of a drivetrain swap & PT suspension upgrade at the moment. THey are available and do look bitchin...

Interesting... where did you get them? I finally got in touch with them, and they told me they dont' do custom BS! They claimed they don't have any other BS than what they list on their site.

[hollywood east customs]

After further review, I went out to measure and the 8" wheels are around 4 1/2" or so..SOrry, I guess I was assuming or did'nt remember they were different backspacing from my 9 1/2" rims...You are correct..

[69c]

hey 69LTINova, i bought front 18 x 8 Boss 338 wheels w/ 5" bs & 4 3/4" bolt pattern for my 69 firebird & 18 x 9 1/2 for the back...havn't fitted yet as my car is at the shop in the process of a drivetrain swap & PT suspension upgrade at the moment. THey are available and do look bitchin...

I wood like to know if you tried the boss338 rims,I have a similar car to yours a 69 camaro and i purchased these rims ,just wondering how the 18by8 fit on the front with that bs. because my car is at the bodyshop and the frame is off. i believe the 18by9.5 for the back wont fit with a 5" bs. It should be 5.5" bs. Because 5"bs will hit the quarterpanel.

[hollywood east customs]

69c, I am in the same position. My car is at my buddies shop with the entire front end tore out. I am installing baer 13" discs up front & am hoping not to encounter much problem in the front that I can't work out with a simple spacer if needed. The rear...well, I am planning to go with a custom rear end anyway so I guess it will be a little narrower, although I do plan to try the stock rear just to see.

[CliffsBlueCamaro]

I thought I would add this to the page. Here are some of the BOSS 338's on an S10.

http://www.s10forum.com/forum/f14/mounted-finally-boss-338-grey-on-red-378778/

I know they arent on a muscle car, but at least you can see what they look like bolted up in real life. :)

[lowrod65]

here a pic of 20 x 8.5 front and back. 20's are tight up front. hits sway bar when turned all the way. only bought two to test fit. might do 18 up front, not sure i like the 2 inch stagger though.

[strangler]

Too big for the front.

[impalatpi66]

lowrod65. the car looks awesome. just slam it to the ground and it will look killer.

[ed1le]

Staggered would look sick, love the '65 btw!

[buickfunnycar.com]

here a pic of 20 x 8.5 front and back. 20's are tight up front. hits sway bar when turned all the way. only bought two to test fit. might do 18 up front, not sure i like the 2 inch stagger though.

18/20 or 19/20 combo would look great on that car...

[lowrod65]

i'd love to do a 19/20 combo but this wheel only comes in 18/20, that's where my problem is. i think 18's look too small with the 20. the car will hopeully be bagged soon, so maybe with the front end down the 18 wouldn't look so small. don't know, kinda like the 20's though. here's a few more pics

[Mr.VENGEANCE]

wow!

[lowrod65]

Thanks, car is just in primer, playing with the idea of a two tone.

[PRRC]

We are a dealer for Boss Motorsport. These 338s are a hot wheel right now. We can do a set of 18s shipped for 725.00 a better deal than on e-bay. The 338s are available in 18x8 w/4.75 or 5.0 B/S 18x9 5.0B/S and 20x8.5 5.23 B/S or 5.80 B/S 20x10 will be available in about a month.
Tim
I like those Boss wheels. Too bad they don't have a wider selection for BS. If they had 18x8 in a 5" BS with a 4.75" bolt pattern, I'd be ordering the grey centered ones right now.

[lowrod65]

do you know if they have plans for a 22?

[mone]

If they had a deeper lip they would be even better

[PRRC]

No 22s planned.

[thulle]

Any one got any pictures on a firstgen Camaro with 338´s 18"?

Will 18x9,5 5,0" BS clear the rear fender lips?

//Mattias

[SLAMDIMPALA]

you can check www.jdwheels.com for some pictures. i know he just did a 69 with a 18/20 combo. great guy,good prices, and super helpful. when i get my tires mounted i will post pictures of them on my impala. i went with chrome 18x8 front and 18x9.5 back and they look massive because of the lip design.

[TonyL]

I loves me those boss wheels. I really like the subtle difference between the new Foose ones and these. The ridge that dissapears along the spoke just works better on the Boss version.

Im saving to buy me some. I'll be in touch Tim.

[thulle]

I can´t find any pictures of the 69 there, and i would prefer pictures on a 67-68 with 18x8 18x9,5,

From what i understand the 18x8 only exist in 4,5" BS with 4,75" boltpattern and the 18x9,5 only exist in 5" BS with 4,75" boltpattern?

This seems a little wide to me as I read that 8" wide in front 4,875-5 BS would be perfect.
And 9,5" wide in rear should have 5,5" BS.

Im aldo doing a drum to Ls1 disk conversion and this also makes the axle a little wider as the disks are thicker then the drums.

So I was woundering if these will fit my car with good clearanse??

[PRRC]

The B/S on the Boss wheels wont work with your set up on a 67-68 Camaro. You will need to go with a custom wheel to get the correct B/S to fit your car with the brake conversion.
We will be happy to give you a quote on any of the Brands we carry.
Rushforth, Boze ,Budnik, Schott, Bonspeed
you wont find an inexpensive wheel that that will work on your car and fit right.If your Budget will only allow X amount of dollars right now. We offer a FREE Layaway on all our wheel lines.

Tim

I can´t find any pictures of the 69 there, and i would prefer pictures on a 67-68 with 18x8 18x9,5,

From what i understand the 18x8 only exist in 4,5" BS with 4,75" boltpattern and the 18x9,5 only exist in 5" BS with 4,75" boltpattern?

This seems a little wide to me as I read that 8" wide in front 4,875-5 BS would be perfect.
And 9,5" wide in rear should have 5,5" BS.

Im aldo doing a drum to Ls1 disk conversion and this also makes the axle a little wider as the disks are thicker then the drums.

So I was woundering if these will fit my car with good clearanse??

[69c]

The boss338 wheels are awsome, and the backspacing on the 18 and 20s combo look great. I purchased a set from jdwheels in black for my 69camaro and for the price they are selling for, you can't beat it, and they look way better than the Coys wheels. -Drum or disc brakes not much difference. Check out jdwheels' website and you will see a 69 camaro (finally after so long).

[Mr.VENGEANCE]

cant front... these look WAY better than coys and tt2s..

and cant beat the price.. the only downside is the lack of a 10 in the rear.
https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[HectorM52]

^^^^

Rear wheels are too big. Looks bad IMHO.

[Roger M]

^^^^

Rear wheels are too big. Looks bad IMHO.

I agree. It might look a little better if the car was dropped an inch or so in the front and about 3 inches in back. IMHO anything bigger than 18 is too big on an F-body. Just my .02

[69c]

there is a 20by10 coming out soon for camaros 6to 6 1/4 backspacing that will fit a 1969 camaro,that will fit a 275or 285 tire in the back. I have these rims in black, and my buddy has them in chrome. No comparison,black looks better and cheaper, this rim is beatiful.

[69c]

my car is lowered in the back, so its stance looks better than that camaro, it looks like that car is not set up yet.needs lowering to do it justice

[brickyard69]

I have the grey Coys on my 69. They are 18X8 and 18X9.5. I love them, but I want to mini tub the car and put a 18X12 on the rear.

Why does Coys and Boss not make a 18X12?

The 20X12 looks goofy. My opinion anyway.

[brickyard69]

BTW... the standard 18X9.5" TT2/Coys (unsure of BS) can I move those to the front without clearance issues? I have Global West upper arms if that helps.

I want to move the rears to the front and put a 12" wheel on the rear.

[brickyard69]

Why does American Racing, Boss, or Coys not make a 18"X12" wheel for mini-tubed first generation Camaros?

You would think they would take advantage of that "common" wheel size for this trend.

[69c]

boss rims, american racing,and coys, dont do custom sizes or custom backspacing, if they did, it would cost you $700-1000 per rim (for18x12). The reason you would go to these companies is pricing and you would get whats available. If you want minitub, you got to pay, to play.

[DaviRotten]

boss rims, american racing,and coys, dont do custom sizes or custom backspacing, if they did, it would cost you $700-1000 per rim (for18x12). The reason you would go to these companies is pricing and you would get whats available. If you want minitub, you got to pay, to play.
Thats funny..I spoke to a rep about custom tt2 .

[streetrods]

I have 18s up front and 20s in back...

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[Mr.VENGEANCE]

im tellin ya.. they look so good.


but i was thinking.. you know when you see the pshop photo of the Foose Nitrous..

https://static1.pt-content.com/images/pt/2009/03/nitrous_old_school_gray_large-1.jpg
https://static1.pt-content.com/images/noimg.gif


The Boss wheels look in real life what the Nitrous SHOULD have looked like in real life...

[gnxtreme]

Guys please, leave the skinny rear tires for the air bagged Mazda mini-trucks.

[TwinSting]

We do all our wheels in custom backspacing to your specs. We sell our Stinger wheel in 18x10 for $475 or 18x12 for $625. The fronts will run you $390.
https://static1.pt-content.com/images/pt/2009/04/cs09stinger-1.jpg
You can see more at www.curtisspeedwheels.com or call Jon at Drivers Inc.

[mone]

The Boss wheels don't have enough lip for me they are very shallow

[FirstGenZq8]

TwinSting, does Curtis have any other wheel styles coming down the pipeline anytime soon?

[TwinSting]

FirstGen
We just released the styles you see on the website this month. We are also getting ready to release a couple three piece offers that have a much more old old school look to them then stuff like Forgeline or HRE.

[buickfunnycar.com]

Guys please, leave the skinny rear tires for the air bagged Mazda mini-trucks.

word...

[gnxtreme]

For guys who aren't afraid of wheel spacers, OE Corvette wheels can be kind of cool. I used 1990 "sawblades" last summer, there
17x9.5 on all four corners with 255 and 275 40 17s. Sorry the
current picture is kind of dark but.... Now I have 17x9.5 fronts
with 255 40 17s and 17 x 11 rears with 315 35 17s .
These are the Corvette Grand sport replicas, and they were only
$429.00 for the set off e-bay BRAND NEW! Thats a low price of admission for and 11" wide wheel:yum: Word to yo momma.

[Rhino]

We do all our wheels in custom backspacing to your specs. We sell our Stinger wheel in 18x10 for $475 or 18x12 for $625. The fronts will run you $390.

You can see more at www.curtisspeedwheels.com (http://www.curtisspeedwheels.com) or call Jon at Drivers Inc.

I may be interested in a set of motorsports. 17x9 or 9.5 in front, 18x10/10.5 in back. What finishes do you offer? Could you PM pricing info?

[ProTouring442]

I don't know the pricing, but the new Cragars look pretty sweet.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

Shiny Side Up!
Bill

[Shiro666]

I was thinking about going with these. They are made by MB motoring and are avaliable through Discount Tire Direct only. They have 17x8 and 17x9.5 in 1st gen Camaro fitment in Gray and Chrome. Again, on the Coy's TT2 sorta thing, but for $141.00, not so bad. I was thinking about painting the center a bronze color or perhaps gold to make 'em stand out a bit.

https://static1.pt-content.com/images/noimg.gif

[caper150]

I was thinking about these as well, I have a set of MB Motoring wheels on my pick-up and have had any problems and they stay on year round in MN weather.