View Full Version : Ron Davis intercooler showed up today
camcojb
02-24-2005, 11:36 AM
My intercooler showed up today and it looks awesome. This one is designed to fit the 67-69 Camaros without having to re-locate the hood latch. I'm using 2.5" inlets on the bottom and 3" outlets to go to the twin 75mm throttle bodies. They can change the sizes on this. I need to get it mocked up to make sure it fits like I think it will. Tim was a huge help in designing this according to what info I could give him as far as fit. And as far as sizing he got with Corky Bell to verify that at the 900-1000 HP range it would not be a restriction.
Jody
https://static1.pt-content.com/images/pt/2005/02/intercooler20005-1.jpg
https://static1.pt-content.com/images/pt/2005/02/intercooler20002-1.jpg
BADVELLE
02-24-2005, 11:51 AM
Looks like it belongs in an art gallery. Nice piece. :worship: :bananna2:
MoeBawlz
02-24-2005, 02:22 PM
looks awesome...
im jealous...
Todds69
02-24-2005, 02:22 PM
Thats real nice....
Restomod
02-24-2005, 02:43 PM
OK I will ask......what does something like that set you back??? PM me if you dont want to broadcast it!! Just curious..............BTW that IS bad ass!!
camcojb
02-24-2005, 02:58 PM
Thanks guys, it is a cool piece designed by Tim at Ron Davis Radiators. You'll need to get ahold of him for pricing.
Jody
my72vette454
02-24-2005, 07:23 PM
That thing is sweet Jody! What are the measurements on it?
BillyBobL71
02-24-2005, 07:52 PM
Jody,
It really is quite an attractive piece.
Is there much fabrication to getting the intercooler, A/C condenser and radiator in front of the core support?
BillyBob
protour_chevelle
02-24-2005, 09:20 PM
Looks damn nice!
Is that an air to air or a water to air?
-Matt
boodlefoof
02-25-2005, 06:19 AM
very snazzy!
Ralph LoGrasso
02-25-2005, 02:03 PM
Looking great, Jody! Excellent work as usual by Tim and Ron Davis.
USAZR1
02-25-2005, 02:09 PM
Looks like it belongs in an art gallery. Nice piece.
That was the first thought that entered my mind,too. Dayum!
porschev8
03-01-2005, 07:36 AM
I'll have some pricing available soon.
https://static1.pt-content.com/images/pt/2005/03/camarointercooler-1.gif
Stuart Adams
03-01-2005, 01:36 PM
Very nice Jody, clean floor too!!
Raptor Pilot
03-01-2005, 02:06 PM
Wow, just Wow.
Steve68
03-03-2005, 04:34 AM
I want one too,
FSTFBDY
03-03-2005, 05:53 PM
Perfection.. Now that is one nice FMIC
Nutsy
03-05-2005, 01:26 PM
Jody,
Do you have any idea what the pressure drop and efficiency is? What kind of cores are those? Tube and fin or bar and plate?
Trev
camcojb
03-05-2005, 02:56 PM
Jody,
Do you have any idea what the pressure drop and efficiency is? What kind of cores are those? Tube and fin or bar and plate?
Trev
I was concerned with the same thing. He had the specs gone over by Corky Bell to get approval and I believe that Tim has the numbers. It is supposed to be very efficient in the 900-1000 hp range, and less than 1 psi drop as I remember.
Jody
my72vette454
03-06-2005, 04:46 PM
Hey Jody, what are the measurements on the core of your intercooler?
Thanks,
Mike
porschev8
03-09-2005, 04:44 PM
The core measures 30" wide x 6" tall x 3.75" thick.
my72vette454
03-09-2005, 09:13 PM
With only 6 inches tall there must not be much pressure loss through it huh?
Powered by vBulletin®