how to get wiring into fuel tank?

[abadsvt]

I am currently planning on building a custom fuel tank. I was planning on using a aeromotive a1000 fuel pump and filter sumberged in the tank but was curious on how to get the wiring into the gas tank to give the pump power. I am thinking some sort of bulkhead but can't find anything. Any tips would be much appreciated. Thanks alot.

Josh

[barno68]

You can drill a hole in the sender plate and use a small stud with nuts on either end with a gasket in between. Very similar to a stock setup.

[RatPwrd]

ATL fuel cell sells wiring bulkheads made just for this purpose,they work great.they are around $20