ATS AFX with c5 zo6

[1badchevelle]

What disk brake can I use on my set up? I have a ATS stock spindle with a C5 ZO6 brake. what are the part numbers and are they off the self?:help!:

[DarkoNova]

Huh? You have the spindle and the brakes, so what do you need?

Matt

[chicane67]

Both 'Touring Classics' and 'KORE3'... (I though both were sponsors of this site... but can only find Touring Classics button on the right >>>) can set you up with the essentials...

[1badchevelle]

Sorry, I need the rotors and need to be 5 x 4.75.

I was on kore3 but looks like they are on vacation. I just may wait until Tobin is back.

[chicane67]

Well... Noel of Touring Classics should be able to do just the same...

[zbugger]

Ummm... I do believe you can go to your local parts store and get stock rotors for it. It's not really a specialty part.

[skatinjay27]

Ummm... I do believe you can go to your local parts store and get stock rotors for it. It's not really a specialty part.yea any rotor for the c5s work, with the c5s the only difference with the standard vette brakes and the zo6 brakes are the color.

[TitoJones]

Sorry, I need the rotors and need to be 5 x 4.75.

I was on kore3 but looks like they are on vacation. I just may wait until Tobin is back.

All C5/C6 rotors are 5 on 4.75" bolt pattern.

Tyler

[dhutton]

These are the GM part numbers I used for C5 Z06 cross drilled rotors:

19183532
19183533


Don

[sik68]

I purchased Napa "Ultra Premium" rotors (86700, 86701, 86702, 86703)

[1badchevelle]

I just picked up a 93 stang for a daily driver. My chevelle will be going in to the garage for a frame off, and will be posting pics once I have the set up on the car. Thank you all for the help.