PDA

View Full Version : Let's Talk about Distributors



maldo
07-25-2008, 11:35 AM
OK i was on the bowl the other nite and looking in my Jegs mag.

Was looking at all the cool MSD Distributors ... I want to replace my HEi unit. i am tired of messing with the weghts and vacuum advance ... I am at the Digital E-Curve Pro-Billet Distributor
http://http://www.msdignition.com/dist_83_8394.htmg

What's your thoughts on this set up. becasue there are so many choices out there and not sure which one to go with.

(my car 1980 camaro 350 vortec heads 700r4 tranny nice size cam etc etc nothing)

oestek
07-25-2008, 01:22 PM
The Digital E-Curve is a great piece, because it's got the built-in adjustable rev-limiter, (no more pills), you don't need an MSD box, (cheaper), and you can easily dial-in your advance curve without screwing with weights and springs. We've used them on several cars and they work very well. The only thing you have to watch out for is that the unit is getting a good ground or it can get unhappy. Hope this helps!

maldo
07-27-2008, 03:08 PM
Thank you would this set up be good for nos and or supercharged motors?

Taylor1969
08-07-2008, 02:18 PM
You could do a msefi w/ electronic halls type distributor or even EDIS for that price range... Then you can tune everything on a laptop

maldo
08-08-2008, 07:37 AM
You could do a msefi w/ electronic halls type distributor or even EDIS for that price range... Then you can tune everything on a laptop

any links to this setup