NEW!!! 68-70 Mustang StrongArms

[darren@ridetech]

Air Ride Technologies finally finished development on the 68-70 Mustang StrongArms. These are a bolt in replacement of the factory arms and are constructed with .219 wall DOM tubing. The lower arms feature a one piece design with a bearing style strut rod mount. The upper StrongArms are adjustable and include a billet aluminum dropped cross shaft to induce positive camber gain while cornering. We also designed a new sway bar that attaches to the upper arm utlitzing one of our PosiLinks.

https://static1.pt-content.com/images/pt/2008/07/attachmentphpattachmentid144d1214945996-1.jpg

https://static1.pt-content.com/images/pt/2008/07/attachmentphpattachmentid143d1214945982-1.jpg

[oestek]

Cool. Are all your arms .219 wall DOM? I know the A-body pieces we installed on the '66 GTO were very substantial.

[darren@ridetech]

Actually, I'm wrong..... Those arm are constructed from 1.25" x .188 tubing. Traditionally, most of our arms were 1.125" x .219, but we have been switching most of them over to 1.25" x .188. The larger diameter tubing with a thinner wall is stronger and looks better.