Hotchkis Tie rod Adjusters

[skeeters65]

Anyone use these??

How are they?

Thanks

[JustinB]

If you need some let me know. I have a brand new set for the 1st gens sitting in my garage. They were to short for my application.

[skeeters65]

IM sent

[PT Goat]

I have a set on the '65 and they are pretty nice. Much sturdier than the aluminum (eBay) ones I had before. I got nervous that under load the threads could pull out of those. Not sure I would have spent the $ for the Hotchkis ones otherwise, but there was a GP and I was already ordering some other goodies.

[LowBuckX]

I have a set on the '65 and they are pretty nice. Much sturdier than the aluminum (eBay) ones I had before. I got nervous that under load the threads could pull out of those. Not sure I would have spent the $ for the Hotchkis ones otherwise, but there was a GP and I was already ordering some other goodies.

Thats funny. I did the exact same thing...

[guccieng]

i had to measure my application and ordered them from speedway motors. they work fine and the jam nuts have not moved with blue loctite threadlocker. i don't think the widest tire on the planet could compromise it's strength. here's a pic:
http://i175.photobucket.com/albums/w154/guccieng/119_1952.jpg