DPE Wheel question

[JLM]

I wasn't able to find some of the information I've been looking for on DPE's site.

can DPE create fitments in 17" sizes?

Also, can DPE do a brushed outer lip with a clear over it?

If yes on both accounts, looking for pricing for 17x8, 17x9.5 with matte black center and brushed outer for the ST-7 and S-20 wheel.

Thanks in advance.

[Nine Ball]

DPE has 2-piece wheels in 18" and larger, up to 10" widths. Their 3-piece wheels (Signature Series) start at 19" and larger and have up to 13" widths.

Brushed/cleared lip is an option.

If you have your heart set on 17s, I can do those in iForged brand. If you can stick with full inch width increments it will be less expensive (2-piece wheels only come in full inch widths of 17x8 and 17x10)

Tony

[JLM]

Hmm, okay, I'll have to look at the sizing and see if a 17x10 is doable.

Thanks for the info.