How well can you ID engines game....

[Samckitt]

http://www.americantorque.com/game/engine-id/

[70bird]

That was fun! Got only 14 right though.

[gearheads78]

That was pretty cool. I missed 1 of 18. Didn't know 348 and 409 had dipsticks on separate sides.

[amx2334]

17 of 18. 348 instead of a 409.

[Smock67]

Well i am not good at all at identifying engine i got 5 out of 18 correct.

[Samckitt]

I got 10 out of 18 correct.

[jknight16]

I'll take my 14 and run...got lucky on more than a few

[Dagger]

I got 18 out of 18 right! I did have to guess on the 348/409 question. I didn't know the dipsticks were on opposite sides.

[ho428]

14 of 18, missed two easy ones by not paying closer attention, other two I just guessed, didn't have a clue.

[rob07002]

A: Correct
Not a Ford 289 (distributor is in back), not a Pontiac (spark plugs are below ex ports), not a Mopar 360 (spark plug location).

77% of the other players got that question right.

You got 18 right out of 18.


Whoa Who!!! Now, what do I win!

[Paul_J]

17 or 18 correct. Missed the ford Flathead ... heads just looked weird.

Congrats Rob07002 how's that for a prize! A congrats from a nobody! LOL

[ho428]

They were wrong about the flathead V8 being Ford only. Oakland produced a flat v8 that was used into the early 30's in Pontiacs.
I've seen an original 32 Pontiac with one in it. Weird looking engine, the exhaust and intake ports are on top whereas Ford exhaust came out the block side.

[Finch]

18/18 with a lucky guess on the 348 vs 409

[slowcamaro]

15.

[jjump59]

I guess i'm more of a motorhead then i thought, 18 out of 18. I'll have to admit a guess on the 348/409, i reasoned that the blower would be on a 409 and then the three dueces on the 348. 389 pontiac had me thinking also.

[Young Gun]

5/18...im not too good at identifiying them...i know basic stuff...but i think if i took it again i would do better...I actually learned a decent amount from that!

[Rhino]

Better than I expected 16 out of 18. I missed the Chevy 348 and Hemi with outboard carbs. At least they were the more obscure of the bunch. :)

[hoosiergta]

14 of 18 not bad considering angles of engines and other stuff in the way of what your looking for!

[Project69]

12 of 18

[eville]

15.
I missed a couple of easy ones...
Thankfully my neighbor has one of those cross ram wedge mopars...

[CamaroLance]

17 of 18. I can't believe I missed the buick nailhead!!! grrr...

[Texas 1972 Velle]

11/18 thats fun!

[monza]

10 and got luck with a couple of guesses

[megaladon6]

7 with alot of luck. what the hell, most of those engines were out of production by the time i was born.

[quadfather]

1 wrong i missed the 348 , 409 dipstick?

[class67]

17 of 18, the wedge got me...not much of a Mopar guy (though I do respect them).

[67z28]

17 out of 18 Missed the pic of the under hood shot....didn't look close

[wedgehead]

18 of 18 here. I have worked on every engine listed there multiple times so I did have an advantage there. i even knew the 348-409 difference. was fun though.

[ATAK, Inc.]

16 out of 18

Made one stupid mistake with the flathead and one I didn't know.

[GetMore]

I got 14 of 18, with a good bit of guessing and deductive reasoning.

[70TWO NOVA]

15 out of 18

[HarleyR]

16 out of 18 missed the one that was barely visable... and cant rember the other.... they need to put some race engines on there...

[shmoov69]

17 of 18
Missed the Olds. Heck, I could not even see the engine! But still missed it. Got the 348/409, but that is only 'cause I got one of each! LOL. Well, now 2 348's!

[CRCRFT78]

15 of 18

[Obsin71Ls1]

10/18 picked up some new info.


P.S. no 409 can sneak by me

[406 Q-ship]

17 out of 18, missed the 409 or 348 question too. I knew that it depended on which side the dipstick was on, I just didn't know which on was on the left side......now I do.:hammer:

[carguy502]

15. I goofed and hit small ford instead of small chevy and the early hemi stuff, but I did know my 348/409 dipstick placement.:thankyou:

[70camaro406]

You got 18 right out of 18.
Cool game. I too am a certified motor head.:cheers:

[trapin]

I got 15 out of 18. The last one fooled me with the tri-power on the small chevy and I screwed up the Olds 455 engine because you couldn't even see the damn thing.

I'm happy.

[tiek1011]

12 of 18 for me. I did better than I thought I would. ...pretty neat

[SaturnVUEguy]

Saw this same quiz at Shadyninja.com and got 10 right

[Ricoch3T]

Did 13 myself, thought i was going to do worse.

[1968CamaroSS_Sam]

Thanks for sharing that. I enjoyed it. I got 16/18

[StRacerDuke]

wow, I got 11/18. That's a lot better than I thought I would do.

[larknut]

17 of 18

[69stang]

18 of 18, I had to think a little on a couple.

[H8tulooze]

14 out of 18