Fesler Built New Shop Shots

[Fesler built]

It has been sometime since my last login and figured it was time to update some of our projects. We have been moving our shop over the last few months and are almost done. I figured now is a good time to post some shots so you guys can see the new place

We are now in over 12,000SF of fabrication, clean room, machine shop(pics coming) showroom and offices. Our paint shop is located in another facility and I will post some pictures of that soon.

https://static1.pt-content.com/images/pt/2008/05/Img0001-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0002-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img00031-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0004-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0005-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0006-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0007-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0008-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0009-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0010-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0011-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0012-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/05/Img0013-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0014-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img00151-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0016-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0017-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0018-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0019-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0020-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0021-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0022-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0023-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0024-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/05/Img0025-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0026-1.jpg

[monza]

WOW!!!:hail:

[protour73]

let's see some more pics of that slammed 2nd Gen, please!!!....great looking shop and office area!!!:kewlpics:

[wiedemab]

let's see some more pics of that slammed 2nd Gen, please!!!....great looking shop and office area!!!:kewlpics:

I'll second that thought!

That is one of the best looking if not the best looking shop I've ever seen. Did you have it built to spec. or was it an existing building.

Again - very nice!

[Fesler built]

I'll second that thought!

That is one of the best looking if not the best looking shop I've ever seen. Did you have it built to spec. or was it an existing building.

Again - very nice!

I am trying to build my own building but the land cost in Scottsdale, AZ is crazy right now so we worked a deal with a building owner to build what you see.

[TonyL]

Sweet shop! you have the same floors as my office. That stained concrete is getting really popular. Very clean shop, class act all the way. Every nook and cranny shows the kind of attention to detail you guys put into your cars.

[Bigblue73]

Nice shop Chris - It looks like you have "space" now. You've got a top knotch facility. Keep up the great work. I was hoping to see Buddy's Merc in your photos. To sweet, one of my fav's.

[Paul_J]

Stained and sealed concrete floors....nice! That is a shop to be proud of.

[72Z/28]

let's see some more pics of that slammed 2nd Gen, please!!!....great looking shop and office area!!!:kewlpics:

Amazing shop, and killer rides.. Yeah please we need to see more pics of that 2nd Gen...

[oestek]

Damn that's nice! We'll have to come by and shoot there sometime! I've got family in Scottsdale, so next time I'm in town it will be nice to slip out!

- KO

[Smock67]

Your shop looks amazing. Who did your cabinets they look awesome. More pics of the white truck under the second gen would be good as well. My mind is blanking on what it is i wanna say a 54 chevy but im thinking im off

[MrQuick]

wow, dream shop for sure. Looks incredible.

More info on that Rivi tho!!

Can I move in?

[syborg tt]

Okay I used to think Pinkee's Rod Shop was incredible looking. Well I take it all back your is got to be one of the best looking shops out there.

Cudo's to you guy's

[syborg tt]

let's see some more pics of that slammed 2nd Gen, please!!!....great looking shop and office area!!!:kewlpics:

Pretty Please - Heck i'll even send a small donation to the shop.

[Fesler built]

Pretty Please - Heck i'll even send a small donation to the shop.

I could use that:)

[akrapovic]

Looks as clean as a doctor's office. Amazing.

[72NovaSS]

Amazing! I would feel proud to have a shop like that! Very professional!

[AlteredImage]

Thats one Clean shop. Very nice. Looks like you might have enough room ( for a little while anyways)

[LMDGUY]

d@mn! nice shop Chris.

[rking]

Its too clean!! You guys dont even work there do you!!!

[oorange67]

BEAUTIFUL!!!!! I am so jealous.....

[Posi12Bolt]

Its too clean!! You guys dont even work there do you!!!

exactly my thoughts as well... :hammer:

[Yelcamino]

Very nice set up! Next time I'm in town I'll make sure to stop in!

[trapin]

Wow Chris. I remember you telling me that you had a new shop coming when I visited you back in March but I had no idea. That is phenomenal. I can't wait to see it in person next year when I fly out. Thanks for posting the pics and congrats.

[Fesler built]

exactly my thoughts as well... :hammer:

That was my goal when moving into a new shop, everything has a home and the shop is cleaned daily to always look new. I am trying to offer a new look on how a hot rod shop that is creating hand built customs should look and opperate. We still have more cabinets coming and bins for our racks so we are almost there. I will post more pics soon

[jackfrost]

are you hiring? :razz:

[hangten]

very nice

[John McIntire]

wow! That shop is absolutely beautiful!!
Whats the deal with the Chevelle on the lift? What are you guys doing to it and do you have any more pics?

[XTRMEASURES]

let's see some more pics of that slammed 2nd Gen, please!!!.

yes please more pics and info

[Fesler built]

I will post shots of all the cars we are working on one by one, it may take me a week to get them up here but I will. We are currantly working on

1970 Chevelle SS, airbaged, LS7, 6speed, 6 piston baer brakes, currie rear end, stock/custom frame, Fesler 19/20 wheels, all custom and clean

1970 Nova SS, airbaged with large tubs to fit 12-inch rear wheels, big brake kit, Chris Alstons front subframe, LS7, 4L65E, Currie rear end, Fesler 19-inch wheels

1966 Mustang GT all metal fabbed car with lots of goodies, will post this one soon

1973 Camaro RS with all the goodies, airbaged, baer brakes, 19-inch Fesler wheels

Two 1969 Chevy Camaros full custom built cars both with Fesler wheels

1965 Corvette full rebuild and all custom with a stock look with Fesler wheels

1958 Chevy Truck with way too much to list new Fesler wheels on the way for it

1963 Buick Riv air baged on 20-inch Fesler wheels, custom mat black paint with flat clear

lots of other cars in the works and will post these later.

[TonyHuntimer]

Awesome!

Tony Huntimer
RaceHome.com

[protour73]

I will post shots of all the cars we are working on one by one, it may take me a week to get them up here but I will. We are currantly working on

1970 Chevelle SS, airbaged, LS7, 6speed, 6 piston baer brakes, currie rear end, stock/custom frame, Fesler 19/20 wheels, all custom and clean

1970 Nova SS, airbaged with large tubs to fit 12-inch rear wheels, big brake kit, Chris Alstons front subframe, LS7, 4L65E, Currie rear end, Fesler 19-inch wheels

1966 Mustang GT all metal fabbed car with lots of goodies, will post this one soon

1974 Camaro with all the goodies, airbaged, baer brakes, 19-inch Fesler wheels

Two 1969 Chevy Camaros full custom built cars both with Fesler wheels

1965 Corvette full rebuild and all custom with a stock look with Fesler wheels

1958 Chevy Truck with way too much to list new Fesler wheels on the way for it

1963 Buick Riv air baged on 20-inch Fesler wheels, custom mat black paint with flat clear

lots of other cars in the works and will post these later.

that car on the lift above the white truck is definately NOT a '74.....but will look forward to more pics of that pristine shop and those beautiful cars/trucks!!!

[Fesler built]

that car on the lift above the white truck is definately NOT a '74.....but will look forward to more pics of that pristine shop and those beautiful cars/trucks!!!

You are right its a 1973 Camero RS

[Fesler built]

The cabinets are all from Equipto (www.equipto.com (http://www.equipto.com/)) it is what you would see in the Penske dealerships and race shops. With these we dont have to have tool boxes around the shop as they are built in and we have more storage than we know what to do with for the time being. I have more cabinets on the way and will post more shop shots soon

https://static1.pt-content.com/images/pt/2008/05/Img0013-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0019-1.jpg

[XTRMEASURES]

that is some very nice cabinets

[sunkistcamaro]

Wow!!!
Talk about having your act together.
Congratulations!!

[shortz]

having a shop in that condition will definately get you customers, i for 1 would definately let my car go to a place like yours. Shows the respect you would show your customers cars, good on ya

[jackrabbit68]

Damn!

[70TWO NOVA]

are you hiring? :razz:
seriously! lol

[Fesler built]

seriously! lol

we are always looking for guys, send me your resumes and I will look them over. email or 602-953-8214

[70TWO NOVA]

I will definatley have to do that
Iam younger (22) and probably dont have the skill many of your guys have in thier little finger, but i would sweep and mop your shop anyday! lol

[wingman]

Beautiful shop. I especially like the curved walls in the office part.:worship: Just kiddin'!

[Surfer]

I will definatley have to do that
Iam younger (22) and probably dont have the skill many of your guys have in thier little finger, but i would sweep and mop your shop anyday! lolPlenty of people got their start that way, kinda like a nice "hazing" :twothumbs

[BMF Machine]

Need a CNC dude with CnC's? My wife loves Scottsdale! I can get pretty fancy or screw up big time?

[70TWO NOVA]

Plenty of people got their start that way, kinda like a nice "hazing" :twothumbs
yeah, i guess you are right, gotta learn somehow.

[jackfrost]

we are always looking for guys, send me your resumes and I will look them over. email or 602-953-8214

heh... the only thing on my resume is computer geek stuff. maybe someday i'll make a career change... ;) :hammer:

[Fesler built]

It has come to our attention that some of you don’t have a clue who we are or where we came from. From the looks of our shop I would hope that most of you have figured out that we are serious about building cool cars.

I have been involved with cars for over 22 years now and I started building them out of my garage at 15, well actually before that since my dad always had cool cars and was always working on them with me. My first car that I remember working on was a 1980 Camaro and a 1955 Chevy Nomad.

Zoom forward a few years and I was building everything possible for all my friends in school and clubs. We were doing adjustable suspension before air bags had even been introduced by installing air shocks. Over the years the projects got better, I met Carrie, the woman of my dreams 14 years ago, married her and the two of us have built this company into what you see here today. Carrie runs the day to day task and runs the marketing and billet company.

We started getting magazine coverage over 11 years ago, with our first of many covers eight years ago. From there, people like GM, Ford, Dodge, Nissan, SCION, Honda and even Lexus approached us about building cars for them to highlight new products and looks. With all the manufactures working with us we even built DEMO cars for Rockstar, Dynamat, Jesse Rooke, Kicker, Malibu International, Kenwood, Snug Top, Directed Electronics, Vizualogic, HTK, H&H Trailers, Audiobahn, World Industries and Street Scene just to name a few.

Fast forward to now and we are working on the next stage or our business, we have a full billet company (Fesler Billet) to design and build cool parts for all you guys, a 3 piece wheel company (Fesler Designs), a marketing/photography company (Fesler Productions) a toy company (Fesler Garage) and the company that builds all the cool cars you guys see (Fesler Built).

For the past several years we have been closed to the general public. Since our move we are gearing up to expand our business to the retail side with the sale of high end parts and accessories. We wanted a shop that people would walk into and say you guys are it, I feel comfortable leaving my car here to be transformed. In our line of work first impressions are everything. You don’t get a chance to win someone over again if you failed the first time. With our shop we feel that once you have seen what we do there is no reason to go anywhere else. We are not a fly by night shop that is here to take advantage of people and their money. We have been doing this for years and one old saying rings true, “you get what you pay for”. We may charge more than other shops but you get a documented build showing why and what you paid for to show you why it’s worth what it is.

This industry is well known for putting a bad taste in enthusiasts mouths when it comes to restoring a vehicle and we all know that there are shops out there that don’t have a clue what they are doing, (body filler seems to be their best friend) and seem to take pleasure in giving someone a less than perfect vehicle. We understand that most of our clients have had a dream about one specific vehicle for years (usually something they drove in highschool) and we take pride in the fact that we strive to make their dreams come true. Sometimes it is not always about money. . .Henry Ford once said, “A business that only makes money is a poor business”. Fesler stands by that motto and earns friendships and respect for life, not just a living. :cheers:

[70TWO NOVA]

The way i look at it, earning peoples respect should come first. Once you do that they will be happy to work with you, and you can then earn there money. Good word or mouth is worth more than any advertising, and as long as you treat people with respect they will do the same for you and your business.

[Fesler built]

The way i look at it, earning peoples respect should come first. Once you do that they will be happy to work with you, and you can then earn there money. Good word or mouth is worth more than any advertising, and as long as you treat people with respect they will do the same for you and your business.

Couldn't agree with you more!

[70TWO NOVA]

By the looks of things you have definately earned a lot of peoples respect. That is something to be very proud of for sure.

[WTRacing]

im speechless....


shop is perfect

[Scalarrthu]

Absolutely amazing setup you have there. Now I'm going to have to plan a trip down to Phoenix to see it in person...and talk cars, of course.