Status on billet gas caps

[Rich G]

I was wondering what the status is on the billet gas caps built by Larry C. for the camaros, could use some help on locating one. I have looked through some of the old posts and it sounds like they are not in full production yet. Just want to make sure I havnt missed out on any information about the caps. Would really like to buy one for my 67. Thanks Rich

[Young Gun]

Nope, they are not quite ready according to Larry's latest update... He has been pretty busy it sounds like and no doubt he will up date us all soon! I think we all want to get our grubby paws on one! Im sure he will chime in here in a little bit for an official update...

[Larry Callahan]

I will get back into this full force after my car leaves for Prodigy Customs. I have been trying to get as much done as I can before it hits the road.

As soon as it leaves I will bang out the fuel cell versions and get the cad file off to the casting house.

[Danny Thomas]

What all is Frank going to do too car and when is it going? Any post or pics of the gas cap. Want one fro 67 if available.

[Larry Callahan]

Frank and the gang at Prodigy Customs are basically going to build the entire car. I am just trying to finish all the wiring. You can follow the thread here.

https://www.pro-touring.com/forum/showthread.php?t=42538

and here are some of the parts for the gas caps

https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=12593

[eville]

:drool:




https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=12593

[chicane67]

https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=12593


OOOOOooooooooooo....... .... ....... fuel system porn !

[patriot68]

ETA for stock tank????

[67 455 Bird ragtop]

I will get back into this full force after my car leaves for Prodigy Customs.

So does that mean I can drive over to Orlando and steal the one off your car ????

[Danny Thomas]

I want one for 67 AWESOME ---- Look forward to following car. Frank just rescued my 67 convertible from Retro Rides hell and it should be in Fla by next week.

[balljoint]

Just put one on my car. Will have to fabricate the funnell though. They look great.
https://static1.pt-content.com/images/noimg.gif

[patriot68]

bump

[Mr.VENGEANCE]

https://static1.pt-content.com/images/noimg.gif

[RUSSSMITH3]

Please Hurry I Must Have One!!!!!!!!!!!

[class67]

https://static1.pt-content.com/images/noimg.gif

Dude, what is it with you and all the freaky sh#t? :poke: It took me by surprise when I scrolled down and saw this, lol

[Mr.VENGEANCE]

ahahahha

caught you sleepin..

[67 455 Bird ragtop]

Ok.. I've decided I'm going over to Orlando this weekend and steal the one off of Larry's car over at Frank's place... :drive1:

[Larry Callahan]

I hate to break the bad news but, take a look at my car being loaded in truck. Now that the car is gone I can and will get back into this. I have to pay for the car build some how. lol

https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=14540

[Cruiser]

I hate to break the bad news but, take a look at my car being loaded in truck. Now that the car is gone I can and will get back into this. I have to pay for the car build some how. lol

https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=14540

The above picture shows a PT member spying Larrys camaro in the trailer and running up to steal the cap only to find someone has already beaten him to it.

[minendrews68]

The above picture shows a PT member spying Larrys camaro in the trailer and running up to steal the cap only to find someone has already beaten him to it.

You know Cruiser, I do believe your right. You'd think Larry would have figured that out. lol I bet that guy was mad that someone beat him to the punch.....:lmao:

[Charley Lillard]

That would be me that stole it.

[J Stone]

I will order one for my 67 with stock gas tank when available.

John

[in2protour]

I hate to break the bad news but, take a look at my car being loaded in truck. Now that the car is gone I can and will get back into this. I have to pay for the car build some how. lol

https://www.pro-touring.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=14540

The guy is probably saying to himself, "I could've had a V8!" :jump:

[SaturnVUEguy]

Any chance for making these for the Saturn Vue?

[1badchevelle]

Larry will you be doing them for the chevelles? 71 in my choice of poison.

[deuce]

i may sound rude but it seems easier to get a mickey mantle baseball card then this gas cap assemble .......i want one too dammit ...lol :help!: :attn:

[Bowtie racing]

I couldnt waited any more,so i ordered 3" ATL cap. Btw my first ever project pic:) Its flush fit with the tail panel.

https://static1.pt-content.com/images/pt/2008/06/P5200024-1.jpg

[SaturnVUEguy]

Bowtie, that looks sharp!

[Rhino]

I couldnt waited any more,so i ordered 3" ATL cap.

I ended up ordering a 3" cap from fuel safe and did the same. No pics up yet, but I'm happy with the results.

[Mark68]

Larry, are these caps going to be ready anytime soon or do we all need to purchase the 3" cap and modify our own? Please post an up-date as to the status of the caps so we can make a choice to wait or buy the other guys cap!

[Bowtie racing]

Bowtie, that looks sharp!


Thanks!!! I am wery excited about it. :drive:

[2Bad4Ya]

http://64.202.180.37/files/cap.pdf

Another option for those not interested in waiting I guess. A friend of mine found these guys while looking for such a cap for his project.

[Larry Callahan]

Larry, are these caps going to be ready anytime soon or do we all need to purchase the 3" cap and modify our own? Please post an up-date as to the status of the caps so we can make a choice to wait or buy the other guys cap!

It won't be long. In a few days I'm hoping to make a very big announcment that will make everyone very happy.

[got6spd?]

I couldn't wait either so I went with a newton cap. The diameter is somehow the perfect size for 67-8 and fits flush with the tail panel if you make an eigth inch rubber gasket.

[Patrick]

I couldn't wait either so I went with a newton cap. The diameter is somehow the perfect size for 67-8 and fits flush with the tail panel if you make an eigth inch rubber gasket.

Do you have a part # for the Newton piece?

[patriot68]

:poke:

[BossaNova]

Hey David Sloan. This is the link to that gas cap. Also, here's the home page:

http://www.batinc.net/aero.htm


See ya at the shop!


http://64.202.180.37/files/cap.pdf

Another option for those not interested in waiting I guess. A friend of mine found these guys while looking for such a cap for his project.

[Jaymz]

I'm not really trying to be rude, but I wish larry wouldent say nothing untell he gets his $#^% straight, every time he says that it wont be long..then you dont hear anything. I understand that larry has a life and thing always dont go the way you expect. but when you tell the public something I think you need to follow through. this has been going on for years. Do me a favor and let this thread die and dont bring it up again untell thay are 100% ready to ship.

[MrQuick]

For not trying you did a pretty good job. I try not to look in this thread but I guess im not that good either.

[got6spd?]

I agree with Jaymz. It's been a pretty frustrating journey.

[BritishGreen68]

Just saw this thread for the first time and im already frustrated. I like the gas cap, but I cant buy it.. ARRRGGG lol..:Alchy::hand:

[Larry Callahan]

I know I know... Soon.

[SSick68]

Dude,

I couldn't wait either so I researched and found a Aircraft Style and nearly bolt in gas cap for my 68. It's a Goodridge/Newton product. Mesa Hose and Supply will get you one for about 200$. Brooks Brown helped me and was cool as hell. Call 949-645-2661. Part# 4230AG for the locking cap and #4230AEN for a non-locking. The cap measures 3.75" Diameter and is flush.
:headbang:

[Young Gun]

Dude,

I couldn't wait either so I researched and found a Aircraft Style and nearly bolt in gas cap for my 68. It's a Goodridge/Newton product. Mesa Hose and Supply will get you one for about 200$. Brooks Brown helped me and was cool as hell. Call 949-645-2661. Part# 4230AG for the locking cap and #4230AEN for a non-locking. The cap measures 3.75" Diameter and is flush.
:headbang:

still gonna wait for larry's, I wanna support the Motiv8r build...plus they are too badass to miss

[monza]

:lol: :lol:
Nice one!

[CarlC]

This is going nowhere and though people here may be frustrated, it's not cool to start hounding Larry. If you're that frustrated use one of the others that have been listed in this thread.