LS1 rear e- brake dust boots

[gearheads78]

Has anyone seen a source for replacements? The factory does not sell separate from the back plates last time I checked. These are crumbled and deteriorating on every LS1 car I have ever worked on.

[Hammered]

Ditto - I even checked 'vette suppliers and cross-checked against the Blazer applications, all of which use the same boot. Interestingly, you can buy kits that include every clip and the barrell adjuster but not the boot?

[2yellow69]

I just checked this with a friend at the local Chevy dealer and you still can't get them seperate. Lame.

Matt

[vicious69]

This is the same for my 95 impala ss, you would think they would sell them seperately by now.

[TTOP350]

Try PBR directly. somehow
they are aussie made brakes so they should have the parts..

[novaracer_2000]

I also was looking for these.I found pbr's site and they show a kit for the whole park brake assembly that comes with the boots but thats it.I sent a email I will post when I get a response.

http://www.pbr.com.au/products/replacement/parkbrakes.shtml

[novaracer_2000]

I got a email today.The guy is looking into it and will let me know.

[2yellow69]

Good job novaracer!! Hopefully he'll come back with good news.

Matt

[gearheads78]

UPDATE!!! Mine are in the mail today :seizure:

http://www.rmsautoparts.com/ had a bunch made but I bet they will run out quick. Only 15.00 for the pair.

[MrQuick]

UPDATE!!! Mine are in the mail today :seizure:

http://www.rmsautoparts.com/ had a bunch made but I bet they will run out quick. Only 15.00 for the pair.
Can you post a part number or a contact name please. Thank you.

[gearheads78]

I think there are only a few people there. Just ask about the F-body e brake boots when you call. I can't remember the guys name its in my notes at home.

The first time I called I waited on the line to talk to someone and finally gave up a left a message. The guy called me back in 15 min and said he is having them made and will call me as soon as they come in. I was thinking yea right I will hold my breath. Well less than 2 weeks later he called me to get a credit card so he can ship mine.
Great customer service!!

[2yellow69]

Thanks guys! I just ordered ours off their website. Less than 25 bucks shipped.

Matt

[dipren443]

UPDATE!!! Mine are in the mail today :seizure:

http://www.rmsautoparts.com/ had a bunch made but I bet they will run out quick. Only 15.00 for the pair.

Sweet. Ordered two pair.

[BonzoHansen]

Nice find

[MJRIBEIRO]

I managed to get PBR to send me a pair (indirectly) via one of their distributors - but they're a little too small. I'll try rms - thanks!

[novaracer_2000]

I managed to get PBR to send me a pair (indirectly) via one of their distributors - but they're a little too small. I'll try rms - thanks!I also got a set from PBR and they fit great.

[MJRIBEIRO]

I also got a set from PBR and they fit great.

Your PBR ones were not a little too small? I'd need to fab a new hold down bracket for them to work..

[2yellow69]

They seem a little too small but they aren't. If I remember correctly you have to stretch them over the caliper and then put the hold down on. They fit very tightly but do work. It's been awhile since I installed my rear brakes so I don't exactly remember the sequence of installing them.

Matt