professor-patrick
04-04-2008, 09:33 AM
Hey everyone, I've been around this site for awhile, don't post much, but have finally got one of my cars far enough along that I'm ready to show it off - hope to have it on the road by middle of May.
It's a 68 Camaro w/ Hot Rods to Hell truckarm rear suspension, Moser 9" rear 3.70 gears, Willwood brakes all around, Martz front end with QA1 coilovers, Power R&P, splined sway bar, and Hydroboost. Engine is .030 over 454, ported iron heads, Edelbrock intake, March serpentine pulleys, Demon 850 carb, hooker headers, Be-Cool radiator. Classic Chevy 5-speed trans. Billet Specialties GTX65 wheels w/Sumitomo tread. Rear is mini-tubbed, has a 4-point rollbar, Vintage Air, no stereo - just engine noise soon.
Anyway, here's the link to the build pics:
www.scotleaidolrods.com/68camaro2.htm (http://www.scotleaidolrods.com/68camaro2.htm)
It's a 68 Camaro w/ Hot Rods to Hell truckarm rear suspension, Moser 9" rear 3.70 gears, Willwood brakes all around, Martz front end with QA1 coilovers, Power R&P, splined sway bar, and Hydroboost. Engine is .030 over 454, ported iron heads, Edelbrock intake, March serpentine pulleys, Demon 850 carb, hooker headers, Be-Cool radiator. Classic Chevy 5-speed trans. Billet Specialties GTX65 wheels w/Sumitomo tread. Rear is mini-tubbed, has a 4-point rollbar, Vintage Air, no stereo - just engine noise soon.
Anyway, here's the link to the build pics:
www.scotleaidolrods.com/68camaro2.htm (http://www.scotleaidolrods.com/68camaro2.htm)