Official Project "In Motion" Thread

[InMotionJosh]

Figured now that im getting some good progress on my 70 Chevelle build id start an official thread to keep posting to from here until the end.
Here is the rendering:
https://static1.pt-content.com/images/pt/2008/03/Chevelle-1.jpg

[InMotionJosh]

Car as it stood when I aquired it.
https://static1.pt-content.com/images/pt/2008/03/FirstDayHome005-1.jpg
https://static1.pt-content.com/images/pt/2008/03/FirstDayHome002-1.jpg
https://static1.pt-content.com/images/pt/2008/03/FirstDayHome008-1.jpg
https://static1.pt-content.com/images/pt/2008/03/FirstDayHome011-1.jpg
[IMG]http://i4.photobucket.com/albums/y138/slofords/Chevelle/FirstDayHome012.jpg[/IMG

[InMotionJosh]

Pulling the body off, Mocking up the motor, and boxing the frame.
https://static1.pt-content.com/images/pt/2008/03/BodyOff023-1.jpg
https://static1.pt-content.com/images/pt/2008/03/BodyOff021-1.jpg
https://static1.pt-content.com/images/pt/2008/03/013-1.jpg
https://static1.pt-content.com/images/pt/2008/03/0111-1.jpg
https://static1.pt-content.com/images/pt/2008/03/009-1.jpg

[InMotionJosh]

Frame, Suspension, Brakes, Wheels, etc. All powdercoated, fresh and ready to install.
https://static1.pt-content.com/images/pt/2008/03/020-1.jpg
https://static1.pt-content.com/images/pt/2007/10/007-1.jpg
https://static1.pt-content.com/images/pt/2007/10/0101-1.jpg
https://static1.pt-content.com/images/pt/2007/10/022-1.jpg
https://static1.pt-content.com/images/pt/2007/10/025-1.jpg

[InMotionJosh]

https://static1.pt-content.com/images/pt/2007/10/018-1.jpg
https://static1.pt-content.com/images/pt/2007/10/0251-1.jpg
https://static1.pt-content.com/images/pt/2007/10/027-1.jpg
https://static1.pt-content.com/images/pt/2007/10/035-1.jpg
https://static1.pt-content.com/images/pt/2007/10/038-1.jpg

[InMotionJosh]

LS2 and 4l80e All Painted and Ready to go in.
https://static1.pt-content.com/images/pt/2008/03/005-2.jpg
https://static1.pt-content.com/images/pt/2008/03/019-1.jpg
https://static1.pt-content.com/images/pt/2008/03/0241-1.jpg

[The Rook]

Unbelievable chassis and engine/trans combo. Need more pics.....

[InMotionJosh]

Unbelievable chassis and engine/trans combo. Need more pics.....
Thank you again for the comment! I need more progress to get more pics! Hopefully this week ill lay the motor and trans in the chassis, get my bling for the motor :naughty: and get the body sent off to media blast. I will be sure to update as it happens.

[Young Gun]

looks amazing...will the ls2 be carbed or injected?

[InMotionJosh]

looks amazing...will the ls2 be carbed or injected?
Most definatly going to be injected! Gotta love the idea of starting the car on the first try no matter what the temperature, and getting great mileage to boot!

[cheapthrillz]

Love the wheel choice! What are they and what sizes?

[InMotionJosh]

Budnik Gasser D
20x8.5 and 22x10

[cheapthrillz]

They looked like gassers but i wasn't sure.... great choice! I'm picturing it slammed in my head and it looks amazing!

[BMF Machine]

VerY, VerY, NiCE

[Chevrolaine]

That looks incredible! Any pics of the body progress or is that the next step?

[InMotionJosh]

That looks incredible! Any pics of the body progress or is that the next step?
Nothing really to show yet. Jeremy has been doing rust repair for a few weeks. Going to start shaving handles and the firewall this week and then off to media blast. I will get pics of it all in primer when it comes back.

[The WidowMaker]

what color is the silver on the suspension? is that going to be the same color on the body? looks a lot like my silver.... its a great color.

[InMotionJosh]

The suspension is powdercoated a dark charcoal color. The paint is going to be a color called Dark Shadow Grey to match my 06 Harley F350.
https://static1.pt-content.com/images/pt/2008/03/0024-1.jpg

[Young Gun]

you need some bigger tires...wheels are fine... just needs more tire!!

[InMotionJosh]

you need some bigger tires...wheels are fine... just needs more tire!!

On the truck or the chevelle?

[Chevrolaine]

I'd say the truck. Is that a load of sheetrock or what?

[InMotionJosh]

Those are 38" tires on my truck. Its two pallets of 10 foot sheets of masonite.

[InMotionJosh]

Finally got some more progress made this week.
13 Inch 4 Piston Wilwood Rear Brakes
https://static1.pt-content.com/images/pt/2008/04/0011-2.jpg
Body back from media blast and in primer
https://static1.pt-content.com/images/pt/2008/04/003-1.jpg
LS2 and 4l80e All Painted up and in the car.
https://static1.pt-content.com/images/pt/2008/04/0122-1.jpg
https://static1.pt-content.com/images/pt/2008/04/0071-1.jpg
Header Clearance with no air
https://static1.pt-content.com/images/pt/2008/04/0102-1.jpg
https://static1.pt-content.com/images/pt/2008/04/014-1.jpg

[Mr.VENGEANCE]

https://static1.pt-content.com/images/noimg.gif

[tony byram]

Thats just unbelieveable! Great job, can hardly type for wiping the drool from my mouth! LOL Send more pics as you progress!

[The WidowMaker]

which headers are those? what engine mounts did you use? whats closest to the ground as it sits (crossmember, headers, tranny pan)?

[InMotionJosh]

Those are the hooker headers with hooker adapter plates. I used engery suspension motor mounts. I bought these headers when they first came out and they were supposed to be for chevelle, camaro, nova, but they did not fit the chevelle at all so the crossmember had to be cut up to make them work. They do make a chevelle set now that should work without any cutting. If i was to do it all over id look at the edelbrock setup.

The headers are definatly the lowest point.

[GBodyGMachine]

Looking great man.

[55chevyman]

Great looking chassis u got there. Keep up the good work!:kewlpics:

[dodge]

looking awesome..well done

[InMotionJosh]

I know I shouldnt let this out of the bag yet but I just cant sit on these pictures. We put the body back on to check for clearances so that the tranny tunnel could be made. Body work is starting now but this is just back from media blast and primered.

Let me know what you think. Lots of new pics coming in the next week or so, be on the lookout.
https://static1.pt-content.com/images/pt/2008/05/P1000942-1.jpg
https://static1.pt-content.com/images/pt/2008/05/P1000944-1.jpg
https://static1.pt-content.com/images/pt/2008/05/P1000947-1.jpg
https://static1.pt-content.com/images/pt/2008/05/P1000948-1.jpg

[Young Gun]

oh boy... hahah this is gonna be sick!

[Code Red]

yum very nice

I wish I had the time and funds to break the GTO down like that one of these days I will

[InMotionJosh]

yum very nice

I wish I had the time and funds to break the GTO down like that one of these days I will

Its alot of fun as im sure you can imagine, Alot of money too! The worst part of this whole thing is waiting....cant wait to hear it run and then drive it!

[Code Red]

Its alot of fun as im sure you can imagine, Alot of money too! The worst part of this whole thing is waiting....cant wait to hear it run and then drive it!


mine should be back on the road in 2 months (though not painted) I expect the car to be back in a week with the front of the fream fixed (wish I had the time to pull the body and get the whole frame blasted and coated)


engine should be back in a month or so form the rebuild

[InMotionJosh]

mine should be back on the road in 2 months (though not painted) I expect the car to be back in a week with the front of the fream fixed (wish I had the time to pull the body and get the whole frame blasted and coated)


engine should be back in a month or so form the rebuild

Good luck, im a little farther off than you. Getting the body finished and painted will be my major hurdle and then time for final assembly.

[Code Red]

Good luck, im a little farther off than you. Getting the body finished and painted will be my major hurdle and then time for final assembly.


yeha I'm on a budget rebuild for now


but yours will look fantastic when done

[Regan]

B-E-A-Utiful.

[chevelle19700]

this is amazing

[gearheads78]

Looking great!! Nice work so far. :smoke: Only thing I would change if it was mine is more tire sidewall. You better keep a couple spare wheels around so you won't have to wait on a replacment the first time you hit a pothole.

[72Z/28]

Looks awesome dude, love the wheels and the stance is amazing.

[muthstryker]

wow, the 22s look good.

[InMotionJosh]

Thanks guys!:woot:

[InMotionJosh]

Just a couple more pictures from today. Just added some corvette valve covers and painted my intake until the new bling shows up.
Also got my 3.5" Aluminum drive shaft from Inland Empire Drive Line. Just wanted to thank everyone at Inland Empire, great service, fast turn around, and they make it very easy to order the right piece the first time. Top quality! THANKS!
https://static1.pt-content.com/images/pt/2008/05/0012-1.jpg
https://static1.pt-content.com/images/pt/2008/05/002-1.jpg
https://static1.pt-content.com/images/pt/2008/05/0031-1.jpg
https://static1.pt-content.com/images/pt/2008/05/0051-2.jpg

[InMotionJosh]

More pictures and details to arrive later!:headbang:

https://static1.pt-content.com/images/pt/2008/06/IMG00100-1.jpg

[InMotionJosh]

Ok guys here it is. My Magnacharger arrived today for my LS2 Chevelle.

Polished MP122HH!!!!
https://static1.pt-content.com/images/pt/2008/06/0013-1.jpg
https://static1.pt-content.com/images/pt/2008/06/0052-1.jpg
https://static1.pt-content.com/images/pt/2008/06/006-1.jpg
https://static1.pt-content.com/images/pt/2008/06/0091-1.jpg

[SaturnVUEguy]

:drool:
That is one helluva setup so far!

[resto-mod]

Man, this build is looking good! Keep the photos & updates coming. When the estimated 1st drive date?

[InMotionJosh]

Man, this build is looking good! Keep the photos & updates coming. When the estimated 1st drive date?

The car is scheduled to go to SEMA so probably about a week before that:eek:

[InMotionJosh]

Finally back to work on the car!

Finally got the Synister Serpentine Kit Installed(ps dont ever buy from them). Also the body is just about done and ready for paint which hopefully will happen this week. Also the interior is coming along nicely. You can see the custom dash test fit here. Its made of fiberglass and only weights 15lbs. There will be matching door panels and console as well.

https://static1.pt-content.com/images/pt/2008/08/P1010299-1.jpg
https://static1.pt-content.com/images/pt/2008/08/P1010293-1.jpg
https://static1.pt-content.com/images/pt/2008/08/P1010290-1.jpg
https://static1.pt-content.com/images/pt/2008/08/P1010286-1.jpg

[wblanton]

That's a sweet build, love the dash, wheels, motor, well lets make it easy the whole thing is bad a$$...

[69TAPoser]

That dash is sweet! :drool:

Phil

[InMotionJosh]

Thanks guys, the pictures dont do the dash justice! Its all wrapped in black leather now and we are waiting for the CNC guy to make the billet inserts for it. Stay Tuned!

[SaturnVUEguy]

I love that dash! Really want to see some pics of it wrapped with the billet inserts once its done

[7TSS]

That's a sweet build, love the dash, wheels, motor, well lets make it easy the whole thing is bad a$$...
2x :hail:

[Motown 454]

Sweet build I can't wait to see the dash finnished.

[Z06killinSBF]

Nice progress. I wish I had the funds to do the same. Keep us updated!!!

[Brand X]

Just registered to say this is the most amazing thing *I* have ever seen.

AMAZING build.

[gearheads78]

comming along great..looking forward to finished dash

[InMotionJosh]

Thanks guys. I should have some good pictures of some finshed interior pieces later this week.

[gordonquixote]

That is so SICK! We are going to need lots more pictures quickly!!!!!!

[KnightMare]

That is hot! How did you manage to get those 22's to tuck!

[progoat]

That is hot! How did you manage to get those 22's to tuck!


Depending on what tire he's running its just due to over all Diam. of the tire...I'm still thinking on putting 20's and 22's on my 65'gto. From me thinking 19's and 20's on it I would go with a wider tire 345/25/20 it's about 27"s tall if i go 22's i'd go 295/25/22 and its about 28"s tall

[Code Red]

wow very nice

[InMotionJosh]

The tires are only 28" tall like stated above. there was no wheel well modification at all. They are 295/25/22

[progoat]

Any updates? Your car is sick man...just plain sick!

[InMotionJosh]

Got a couple new pictures today. Got the Retrotek Speed Pushbutton Shifter installed, and got a couple cleaner pictures of the motor.
https://static1.pt-content.com/images/pt/2008/08/Retrotek2-1.jpg
https://static1.pt-content.com/images/pt/2008/08/RetrotekShifter-1.jpg
https://static1.pt-content.com/images/pt/2008/08/Synister-1.jpg
https://static1.pt-content.com/images/pt/2008/08/0061-1.jpg
https://static1.pt-content.com/images/pt/2008/08/008-2.jpg

[InMotionJosh]

Also here are some more interior picture updates.

Door Panels in FiberGlass and Then Being Covered
Kick Panels in FiberGlass then Finished
Package Tray Covered

All of the panels are being wrapped with black first, then will get custom suede, and billet inserts.
https://static1.pt-content.com/images/pt/2008/08/DOORS_055_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/SEMA_034_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/CHEVELL2_111_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/CHEVELL2_114_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DASH_028_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/CHEVELL2_007_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/SEMA_031_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/08/SEMA_012_detail-1.jpg

[progoat]

Is that the factory rear seat? Everything is coming along sweet:jawdrop:

[InMotionJosh]

Is that the factory rear seat? Everything is coming along sweet:jawdrop:

Yes, its going to be a factory rear seat covered in black leather to match the corbeau front seats.

[Z06killinSBF]

Looking good. Can't wait to see the finished product.

[silverdenali22]

Going to be nice, can't wait to see it finished!

[HectorM52]

Subscribed. Cool project.

[bwhinnen]

wow! I think that describes it best! Awesome work and attention to detail!

[Motown 454]

Very nice work, very nice. I really like the door and quarter panels.

[InMotionJosh]

https://static1.pt-content.com/images/pt/2008/09/CHEVELL2_016_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/09/CHEVELL2_012_detail-1.jpg
https://static1.pt-content.com/images/pt/2008/09/CHEVELL2_004_detail-1.jpg

[Motown 454]

Wow awesome job on the package tray and panels They look awesome. That interior is going to set this buil off.

[1offwizard]

Very nice! I can't wait to see this thing complete!!!

[gearbanger]

I was wondering about your trans crossmember. Is there any benefit to making the tubular pieces attached to the frame to attach the crossmember to? I am planning to make a better crossmember after I box my frame but I really didn't know how I was going to do it yet?

[InMotionJosh]

I was wondering about your trans crossmember. Is there any benefit to making the tubular pieces attached to the frame to attach the crossmember to? I am planning to make a better crossmember after I box my frame but I really didn't know how I was going to do it yet?

MirandaBuilt made the crossmember that way to stiffen the chassis a little more, and also because the shorter the crossmember is, the less it can flex.

[InMotionJosh]

Some new bling showed up today from Abear Motorsports. www.abearmotorsports.com

The fit was perfect and the finish was even better. They turned them around from the time I ordered them and got them the info for the engraving in a very short time. They are perfect and couldnt ask for more. I really like that they hide the coils. I would highly recomend them to anyone who might be looking for some nice LS valve covers.
https://static1.pt-content.com/images/pt/2008/09/0032-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0042-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0141-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0181-1.jpg

[Motown 454]

Those look awesome , Thats a great idea and it save the headache of moving the coils nice

[GMracer]

looks good josh, keep it up

[gearbanger]

Wow, I think that is the coolest looking setup I have seen for valve covers on the LS motors. I love it!

[bwhinnen]

Have to agree they look totally wiked! The whole project is coming along nicely!

[InMotionJosh]

Made a little progress on the car today. Installed the vintage air box, firewall bulkhead, interior lines, dynotmat in trunk and interior.

Also got the wiring harness from Current Performance through the firewall.

https://static1.pt-content.com/images/pt/2008/09/045-1.jpg
https://static1.pt-content.com/images/pt/2008/09/044-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0201-1.jpg


And a little teaser of the body back on the chassis
https://static1.pt-content.com/images/pt/2008/09/0171-1.jpg

[HectorM52]

Looking good. I'm JEALOUS of your vintage air setup!

[mach1stang]

Holy cow your in florida! I may have to come and see this thing!!!

[InMotionJosh]

MirandaBuilt made some good progress on the car today. Jeremy fabbed up the exhaust system. Dustin installed the Rock Valley Fuel tank and plumbed it. I want to thank Rock Valley, Red Horse, and Magnaflow for all the parts for this build. The Magnaflow mufflers, high flow cats, and stainless tubing were top notch and great to work with. Rock Valley sent this beautiful stainless tank with internal pump, and Red Horse sent all the black fittings.
https://static1.pt-content.com/images/pt/2008/09/0112-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0142-1.jpg
https://static1.pt-content.com/images/pt/2008/09/036-1.jpg
https://static1.pt-content.com/images/pt/2008/09/046-1.jpg
https://static1.pt-content.com/images/pt/2008/09/050-1.jpg

[InMotionJosh]

https://static1.pt-content.com/images/pt/2008/09/0301-1.jpg
https://static1.pt-content.com/images/pt/2008/09/072-1.jpg
https://static1.pt-content.com/images/pt/2008/09/070-1.jpg
https://static1.pt-content.com/images/pt/2008/09/069-1.jpg
https://static1.pt-content.com/images/pt/2008/09/0043-1.jpg
https://static1.pt-content.com/images/pt/2008/09/056-1.jpg

[Code Red]

pure sex

[gearheads78]

Everything is looking great

I hope you like those mufflers. I ran a set on a car and will not again. They are very loud with dumps like that

[98zq8]

Why are you using converters on your exhaust? They are hardly noticeable but......

[InMotionJosh]

Why are you using converters on your exhaust? They are hardly noticeable but......

I used converters to mellow out the car a little bit, and also to keep the fumes down.

[Young Gun]

looks sweet! keep up the great work!

[91blkstpsd]

Wow, unbelievable build man! Its looking great! Cant wait for the finished product.

[jy211]

looking very nice :smoke:

[gordonquixote]

Give us a side shot!!!

[InMotionJosh]

Give us a side shot!!!

As bad as I want to post up some side shots, we switched up the paint design from the rendering and want to keep it in the bag until a little closer to SEMA.

[Motown 454]

Are you going to post any sound video. I would like to hear how it sounds. Awesome car.

[InMotionJosh]

Yes, we hope to get the engine fire this weekend. I will make sure to take some video as its starting.

[Motown 454]

Thanks I'll watch for it

[InMotionJosh]

Here are a few updated shots of the car. Miranda Built made alot of good progress on the car this week. The engine started, front end is on, began plumbing the AC system, transmission lines are done, fuel system is done, suede headliner is done, carpet is done, seats have all been covered in leather, etc.

https://static1.pt-content.com/images/pt/2008/10/021-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0232-1.jpg
https://static1.pt-content.com/images/pt/2008/10/028-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0351-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0471-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0253-1.jpg

[InMotionJosh]

https://static1.pt-content.com/images/pt/2008/10/0491-1.jpg
https://static1.pt-content.com/images/pt/2008/10/067-1.jpg
https://static1.pt-content.com/images/pt/2008/10/064-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0561-1.jpg
https://static1.pt-content.com/images/pt/2008/10/058-1.jpg
https://static1.pt-content.com/images/pt/2008/10/059-1.jpg

[BMF Machine]

WoW; This is my first glimpse at this thread. I must say that dash made me goo up my keyboard again? Day'um SicK rides on here everywhere!:eek:

[Mike Norris]

I guess the program I put it must have worked if she started for ya :cheers: Did she start and idle okay?? God seeing you the other night as well as everyone else and out for dinner. Let me know what else you need.

Mike Norris

[InMotionJosh]

It started with no problems but we only ran it for a second or two. There was no MAF, no o2 sensors, no belt, no cooling system etc. Thanks for getting that tune in there for us.

[Mike Norris]

Don't thank me yet, I think it has to run a little longer first. Talk to you soon.

Mike Norris

[InMotionJosh]

Here are some better pictures of the dash at night. The Autometer guages are very very nice at night and the Alpine monitor is a great compliment to them!
https://static1.pt-content.com/images/pt/2008/10/011-1.jpg
https://static1.pt-content.com/images/pt/2008/10/012-1.jpg
https://static1.pt-content.com/images/pt/2008/10/020-1.jpg

[BMF Machine]

Damit DudE; Cut it out........... There went my new Keyboard........:geek:

:here!: As per forum rules.... that is getting pretty close to PorN righT there?:worship: :drool: :drool:

[KnightMare]

looks like i got the same alpine monitor you did, I got the w505. I want to see some more shoots of those wheels on the car

[InMotionJosh]

Yes, it is the W505 from alpine. Very nice piece. The wheels are actually coming off the car next week for a set of GFG 3 piece.

[KnightMare]

Aww man, the ones you had on there was already bad ass!

[InMotionJosh]

Aww man, the ones you had on there was already bad ass!

Thanks, I really wanted 3 piece wheels when I started this project but some people talked me out of it. You will like the GFGs when you see me:woot:

[70 Chevelle]

That interior came out perfect!

[gordonquixote]

I haven't even seen the damn thing yet and it is my new favorite car....great interior!

[gearheads78]

Usually not a fan of custom dashs at all but your guys did a great job I like it a lot.

-Richard

[jy211]

Love the dash personally..I may need to get ahold of the guys there for the interior in my 55'...

[InMotionJosh]

Love the dash personally..I may need to get ahold of the guys there for the interior in my 55'...

Let me know if you need anything at all done, interior, performance, paint, etc and I will put you in touch with some good people who will take care of you.

[1badchevelle]

Let me know if you need anything at all done, interior, performance, paint, etc and I will put you in touch with some good people who will take care of you.

x2. I love the dash and door. PM contact info.

[InMotionJosh]

You can find all the contact info for the interior guy at http://theshopllc.com/

He is also on myspace and hubgarage with alot of his builds.

[InMotionJosh]

Miranda Built decided to change the braided line from the fuel tank to Stainless Hardline.
https://static1.pt-content.com/images/pt/2008/10/CIMG1708-1.jpg

Intake by Vibrant Performance
https://static1.pt-content.com/images/pt/2008/10/0021-1.jpg

Defrost Vent
https://static1.pt-content.com/images/pt/2008/10/0062-1.jpg

Custom Air to Water Intercooler by Saldana Racing Products
https://static1.pt-content.com/images/pt/2008/10/0072-1.jpg

[1badchevelle]

Will this car see any time in So-Cal? I will not be able to make it to sema this year. I would love to see it in person. Keep the pictures coming.

[InMotionJosh]

Will this car see any time in So-Cal? I will not be able to make it to sema this year. I would love to see it in person. Keep the pictures coming.

Probably not.:banghead: Wish we had time to take a couple days in Cali though.

[InMotionJosh]

Here is a quick video of the DigiTails by Spaghetting Engineering. These are LED and Sequential. They are very nice and look killer.
BcnTdS6SW4g

[KnightMare]

The Chevelle is just getting better and better, cant wait to see more

[InMotionJosh]

Here is the prototype billet tail lights by Miranda Built. Stay tuned for the buffed car and polished lights tommorow.
https://static1.pt-content.com/images/pt/2008/10/0123-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0104-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0081-1.jpg
https://static1.pt-content.com/images/pt/2008/10/0054-1.jpg

[1badchevelle]

:seizure:more pic more pics :jawdrop:

[InMotionJosh]

We are on the way to SEMA. Left Ft Lauderdale Florida on Thursday at 230pm, scheduled to arrive to Las Vegas on Sunday before noon.
https://static1.pt-content.com/images/pt/2008/11/0033-1.jpg
https://static1.pt-content.com/images/pt/2008/11/0083-1.jpg
https://static1.pt-content.com/images/pt/2008/11/0092-1.jpg
https://static1.pt-content.com/images/pt/2008/11/0073-1.jpg

[Motown 454]

Looks great you guys did an awesome job

[1badchevelle]

Any shots of the completed interior?

[BaddestBuick]

Looks amazing! what sizes are the rims/tires?

[InMotionJosh]

Looks amazing! what sizes are the rims/tires?

They are 20x8.5 Fronts and 22x10 Rears. GFG Bagdhad 5
The Tires are Nitto Invo 245/30/20 and 295/25/22

[gearheads78]

Turned out increadible. I like the new wheel much better.

-Richard

[InMotionJosh]

Here are some pictures of the Chevelle placed at SEMA. The car is located right outside the front doors to the South Hall. It is right in the same area as the big DUB booth.
https://static1.pt-content.com/images/pt/2008/11/0381-1.jpg
https://static1.pt-content.com/images/pt/2008/11/0412-1.jpg
https://static1.pt-content.com/images/pt/2008/11/037-1.jpg
https://static1.pt-content.com/images/pt/2008/11/0361-1.jpg

[BaddestBuick]

Hey thats not enough pictures!! post more lol

[1badchevelle]

Hey thats not enough pictures!! post more lol

2nd that.

How well documented was this build? I would love to see more, more , more.......:headbang:

[gordonquixote]

If you are rolling I-10 through Tallahassee, PM me and I'll buy lunch just to look at that thing!

[1badchevelle]

Best of show.

[KnightMare]

I call that sexy in black, i just noticed the shaved door handles.

[Motown 454]

More pictures please

[icebird84]

Excellent Chevelle

[T_Raven]

Hey I just noticed you used the seats I want. What do you guys think of them? I need to find a place I can sit in them.

[InMotionJosh]

The seats are great, very comfortable and supportive. I would highly recomend them to anyone looking for something similar. Check out www.corbeau.com

[gordonquixote]

More pics?

[InMotionJosh]

Anything your looking for particular? here are a couple
https://static1.pt-content.com/images/pt/2009/05/IMG_3347-1.jpg

[HectorM52]

HOLY CRAP!

Good photography! And the car is pretty nice too! :D

[fastfail]

Wow, you guys did an exceptional job. That car is simply amazing.

[CruizinKev]

https://static1.pt-content.com/images/pt/2009/03/homerdrool-1.gif

[1nkred1ble]

i see why people kill out of jealousy

i want it iwant it iwant it!!!!

[MirandaBuilt]

I know its been awhile since any pics have been posted and with the owners being very busy thought i would share some that we took before it left the shop.

https://static1.pt-content.com/images/pt/2009/05/DSC00102-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00104-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00109-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00109-1.jpg

[MirandaBuilt]

Some of the interior.

https://static1.pt-content.com/images/pt/2009/05/DSC00114-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00114-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00116-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00117-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00119-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00121-1.jpg

[MirandaBuilt]

And a couple of under the hood!

https://static1.pt-content.com/images/pt/2009/05/DSC00123-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00123-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00128-1.jpg

https://static1.pt-content.com/images/pt/2009/05/DSC00130-1.jpg

[MirandaBuilt]

One last one car owner nick (on the left) and builder Jeremy Miranda (right)
https://static1.pt-content.com/images/pt/2009/05/CIMG1900-1.jpg

[Ratty 46]

Nice job .......

Ratty 46

[Young Gun]

looks awesome!

[Motown 454]

Very Nice !!

[1badchevelle]

I just love this car. By far the best built chevelle I have seen.

Thanks for the build and all the pics.

[Mr.VENGEANCE]

daaaaamnn!

how did i miss this thread!?

[jilge71]

daaaaamnn!

how did i miss this thread!?

x2.....very inspiring

[1nkred1ble]

https://static1.pt-content.com/images/pt/2009/06/yum-1.jpg

[shortrack]

We are on the way to SEMA. Left Ft Lauderdale Florida on Thursday at 230pm, scheduled to arrive to Las Vegas on Sunday before noon.

https://static1.pt-content.com/images/pt/2008/11/0073-1.jpg

beautiful build wow!....you know you shouldnt cross those tie downs......if one gets loose it will pull the car into the side of the trailer.....run them straight back

[CruizinKev]

woohoo wow very nice!!! :twothumbs