Fesler Built 1970 Nova Project Build With Huge Wheels

[Fesler built]

OK so the 1970 Chevy NOVA is starting to be a popular car so I thougth I would share one of our latest builds with all. We are building this car for everyday driving and some track time so its mild but will sit very cool.

I will post pics of the build as we go but here are some of the products we are using

GM Performance LS7 engine
GM Perfromance 4L65E tranny
Chris Alston's Chassie works full sub frame set up
Currie 9-inch rear end
Wilwood 6 Piston brakes
Air Ride Technologies air system
Fesler FS 905 wheels 19X9.5 front & 19X12 rear
Michelin 285/35ZR19s front & 345/30ZR19 rear

still deciding on lots of other parts but as you can see this will be one sick NOVA when completed. I will try to update as we move along.

[Fesler built]

OK so we tear the car down to nothing and send it out to be meda blasted and than sealed so it cant rust while we do the work on it.

Cut out any rust and remove the frame rails as we are going to build a custom tub

We start by fitting the new frame rails into the car so we know where the tubs will go

[Fesler built]

here we cut the floor out for the frame rails and will have to rebuild it to look factory

[Fesler built]

here are the tubs almost finished

https://static1.pt-content.com/images/pt/2008/03/img0150-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0159-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0180-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0181-1.jpg

[Fesler built]

OK here are the sub-frame and wheels shots that a few of you have asked me about.

Chris Alston front clip

https://static1.pt-content.com/images/pt/2008/03/Img0007-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0097-1.jpg

Fesler FS905 wheels 19X9.5 front and 19X12 rear

https://static1.pt-content.com/images/pt/2008/03/Img0236-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0241-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0244-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0246-1.jpg
https://static1.pt-content.com/images/pt/2008/03/Img0248-1.jpg

[69Nova]

Your right those are huge wheels! It's cool to see another Nova gettin attention. What color is it gonna be?

[rockdogz]

Very cool!

I love big wheels and I cannot lie..

[ViperBlue68]

looks good! I love 68-72 Novas and H-1s too whats the deal with the H1 in the background?:pics2:

[Fesler built]

We are not like most shops we build everything, we built the H1 Alpha in the back ground for a guy and now we are building a hard top for it and Air bagging it so it will ride better, I will post some pics when done but here is what we did so far. http://www.feslerbuilt.com/2006H1Alpha.htm


looks good! I love 68-72 Novas and H-1s too whats the deal with the H1 in the background?:pics2:

[Posi12Bolt]

We are not like most shops we build everything, we built the H1 Alpha in the back ground for a guy and now we are building a hard top for it and Air bagging it so it will ride better, I will post some pics when done but here is what we did so far. http://www.feslerbuilt.com/2006H1Alpha.htm

thats AWESOME!! good job! :kewlpics:

[Fesler built]

thanks wait till you see it laid out on air


thats AWESOME!! good job! :kewlpics:

[Bruning Auto Design]

nice start! looking forward to updates :)

[LMDGUY]

Looks Good Fesler

[GHOSTDANCER]

Beautiful project :hail:

Do you have any pics of the rails from underside ? How they turned out and how they connect to the subframe.

[Young Gun]

glad to see novas getting soo much love lately, car looks great! gives me quite a bit of motiviation to really get mine going! hopefully over spring break...

[Fesler built]

Here are a few and this is a full frame car now with a bolt on front section, I wll post some pics of that soon so you can see how we did it. looks smooth and from underside almost looks factory

https://static1.pt-content.com/images/pt/2008/03/img0197-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0191-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0198-1.jpg
https://static1.pt-content.com/images/pt/2008/03/img0201-1.jpg


Beautiful project :hail:

Do you have any pics of the rails from underside ? How they turned out and how they connect to the subframe.

[ViperBlue68]

We are not like most shops we build everything, we built the H1 Alpha in the back ground for a guy and now we are building a hard top for it and Air bagging it so it will ride better, I will post some pics when done but here is what we did so far. http://www.feslerbuilt.com/2006H1Alpha.htm

badass! I've always thought you did Top Notch work just on muscle cars and trucks.... nice to see you do all types of custom cars I have an H-1 with 22" Welds and always kick myself for not ordereing them with the valvestem on the inside so I coulda kept the CTIS hooked up without seein it...I like the top you made for the bed as well...keep up the great work!

[dodge]

awesomeeeeeeeeeeeeeee work

[dstryr]

what kind of rims are on that blue camaro next to the nova? got any more pictures of it?

[elctron02]

wow...thats sick for a Nova!!!! Im kinda going for the same approach, however Im doing mine in my garage....Dont have the funds or the tools...but Im doing my best!!!

Question.....How will you join the outwheel wells to the quarter?
Im adding a rubber stripe along the edge so you dont hear metal on metal then I will add sealer too....

what should I do?

check out my Nova!!!

http://www.stevesnovasite.com/forums/showthread.php?t=77990

[NvrDun71]

badass!!

[MrQuick]

Looking good Chris, I like the plan so far. I must say that was a lot of progress in a 6 hour period. You by any chance have a guy named Chuck working for you?


More pictures please.

[Fesler built]

what kind of rims are on that blue camaro next to the nova? got any more pictures of it?

Fesler FS 904 wheels in 19-inch all the way around, I will post that car up here soon

http://www.feslerbuilt.com/FeslerDesigns.htm

[Fesler built]

The outer wheel wells are welding into place so there is no chance of them moving, drill spot welds about every 2 inches or so where they meet up and weld them, seam seal and its ready for paint. This will make it very strong even better than what you started with.

Looks like a cool project and remember we all started somewhere so keep it up. These forums are the best place to learn things and meet great people so if you are not sure how to do something or want more ideas just through up a post and everyone will help you out. Good luck


wow...thats sick for a Nova!!!! Im kinda going for the same approach, however Im doing mine in my garage....Dont have the funds or the tools...but Im doing my best!!!

Question.....How will you join the outwheel wells to the quarter?
Im adding a rubber stripe along the edge so you dont hear metal on metal then I will add sealer too....

what should I do?

check out my Nova!!!

http://www.stevesnovasite.com/forums/showthread.php?t=77990

[Fesler built]

Looking good Chris, I like the plan so far. I must say that was a lot of progress in a 6 hour period. You by any chance have a guy named Chuck working for you?


More pictures please.

I am trying to set new standards on how fast cars are built and I think at this rate I can build a car every two weeks. :lmao:

With that being said we really have about a month in this project so far and would think it should be completed in under 6 months. I have a great group of guys and we mesh very well together so things move fast. It also helps when you do everything in house you can control the progress of each build with less problems

No Chuck here, sorry

[K5Cruiser]

You guys are jammin' on this thing! Keep up the great looking work.

I am particularly interested in seeing what you do for your upper shock mounts. When you get there, please post detailed pics of the underside and trunk area, as I am at this point in my project '72 Nova. I'm also interested to see how you deal with the crossmember that I have outlined in red below when you do your shock mounts. Thanks!
https://static1.pt-content.com/images/pt/2008/03/Novaunderside-1.jpg

[Z06killinSBF]

That thing is nasty. I LOVE IT!!!

[Rybar]

Sweet ass project, love the direction you are going with it.

[Young Gun]

this build drives me crazy...I wish I could make this much progress this quickly on my car!!!! i love it though...you guys are definately doing nova's justice!

[gearheads78]

Ehh...Looks OK now but the white wagon wheels were the shiznit :)

[michael6372]

Any new progress/ pics??

[Chevrolaine]

We need pics of that secondgen on the lift in the background!

[liquidcreations.net]

Chris, This Nova Looks Slick Already! Nice Work.

[Fesler built]

I will post some shots soon, we just dropped in the new LS7 and I must say its a sick set up. We are getting everything ready to send the car to paint.

[Young Gun]

so are you guys gonna be making any nova-specific pieces?? would love to have some spiffy billet stuff for the nova...got the go ahead to start some major work today so I hope to find some cool billet pieces for it!

[Fesler built]

Funny you should ask, we will be making all kinds of parts for it, we just did the LS7 engine mounts and will have more. I will post up here as soon as we have stuff.


so are you guys gonna be making any nova-specific pieces?? would love to have some spiffy billet stuff for the nova...got the go ahead to start some major work today so I hope to find some cool billet pieces for it!

[marine02ss]

Nice build

[michael6372]

any new updates? i went to your site but didn't see anything there on the nova. lookin great!!!

[Fesler built]

I am in the middle of a huge shop move so the Nova is down for a few days, I will post some pics next week as I am off to Delmar tomorrow for Goodguys. Thanks

[Justg]

Are you guys on this weekend? I'd like to see your work. I live in Tucson. G

[whytry]

That thing is bad ass!

[michael6372]

any new updates or pics???

[Fesler built]

Our move is almost done as many of you now know, so we are back up and working on the cars so I will post more updates now. Here is the GM LS-7 going in the car

https://static1.pt-content.com/images/pt/2008/05/Img0273-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0275-1.jpg

[Fesler built]

Here is more of the rear of the car inside under the rear seat area with the rear suspension.

https://static1.pt-content.com/images/pt/2008/05/Img0286-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0288-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0291-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0299-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0312-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0321-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0328-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0348-1.jpg

[GHOSTDANCER]

:kewlpics:

[Fesler built]

So we looked and looked for a cool dash, we found nothing so we decided to build our own to fit the car perfect but with a better look than factory. We used the large Autometer gauges and I think once painted it will make the interior. Very clean

https://static1.pt-content.com/images/pt/2008/05/Img0387-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0389-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0396-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0403-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0410-1.jpg
https://static1.pt-content.com/images/pt/2008/05/Img0412-1.jpg

[NOPANTS-68]

wow outstanding job. I love the dash.

[70TWO NOVA]

WOW! That is one awsome build. I thought putting an procharged LS6 in my Nova someday would be sweet, youve got me really thinking now......maybe laying body wouldnt be so bad either! lol

[Young Gun]

Will you guys be offering the dash for sale in the future? I've been on the hunt for a cool dash, not a huge fan of the covan's, and that one looks pretty sick!

[camaro_in_another_life]

...

[DJW32]

Chris,
Where did you get the gas pedal?

[69LT1Nova]

x3 on the dash. Badass!! You guys should sell them.

[NvrDun71]

x3 on the dash. Badass!! You guys should sell them.

WERD on the dash. Please tell me they will be a future Fesler production item, looks great! :twothumbs

[Fesler built]

Lets see how many people would be willing to buy the dash, we could just build the blank and you guys can cut holes where you wnt them. If I can get enough interested to do it I might be able to figure out a way to get the cost down. So let me know whos in

[NvrDun71]

Lets see how many people would be willing to buy the dash, we could just build the blank and you guys can cut holes where you wnt them. If I can get enough interested to do it I might be able to figure out a way to get the cost down. So let me know whos in

I would be in for one, do you have a general ballpark on cost?

[XTRMEASURES]

that car is really comming out aesome.

love the blue camaro in te background

[JPMACHADO]

Awesome build

[strtlegal]

would love to have an updated dash...

[GBodyGMachine]

What a great project. Shop looks great to. Hiring?

[Fesler built]

What a great project. Shop looks great to. Hiring?

We might be looking where do you live?

[GBodyGMachine]

We might be looking where do you live?

Unfortunataly I live in Detroit. I would love to make the move down south, but I need to secure a position at a reputable shop first.

[Nessumsar]

Love the progress! I would be interested in a dash.

[WTRacing]

incredible, cant wait to see more

[Stargazer]

Wow,
awesome project!
I will be in Scottsdale this summer, while on holiday.
Would love to check it out live!

[Fesler built]

here are some updates on the Nova, its getting ready to go to paint next week. Exhaust is all done and wheels will go on next

https://static1.pt-content.com/images/pt/2008/06/Img0545-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0551-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0564-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0568-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0566-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0631-1.jpg

[Fesler built]

Here are the massive wheels going on the car

https://static1.pt-content.com/images/pt/2008/06/Img0589-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0597-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0600-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0616-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0610-1.jpg
Look at that size on there 345/30ZR19 on a NOVA
https://static1.pt-content.com/images/pt/2008/06/Img0608-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0625-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0619-1.jpg
https://static1.pt-content.com/images/pt/2008/06/Img0622-1.jpg

[stang97]

Thats some serious rubber on there. How good was the org. body? It looked pretty good from your pictures. Not much rust? Badass nova for sure! Paint colors?

[Code Red]

nice man

[GHOSTDANCER]

Wicked BAD :hail: :hail: :cheers:

[Fesler built]

Thats some serious rubber on there. How good was the org. body? It looked pretty good from your pictures. Not much rust? Badass nova for sure! Paint colors?

As you can see like you stated that the body was clean this car was a AZ car so barely any rust on it just had to get some dents out and weld some holes up. The hood did have the front edge all rusted out and not sure why its if it was from a car back east.

Think its going to be a new Silver color just havent finalized it yet. Will update the progress as we move forward.

[69LT1Nova]

:worship: :worship:

Yeah baby! Lovin' it!

:hail: :hail:

[Josh292]

Looking Good! Can't wait to see paint on it!! :twothumbs

[tony byram]

WOW Chris! Thats one great looking Nova. All I can say is ,thats one SWEET ride! Tony

[MrQuick]

Looking good. Hope the color choice compliments the look.

[Young Gun]

can we get a close-up of the shaved drip rails???

[mach1stang]

What size exhaust tubing did you guys use?

[michael6372]

any updates and pics of the car?? really looking forward to seeing this car when it's done!!:cheers:

[WILWAXU]

Lets see how many people would be willing to buy the dash, we could just build the blank and you guys can cut holes where you wnt them. If I can get enough interested to do it I might be able to figure out a way to get the cost down. So let me know whos inPut me on the list for the dash.

[70TWO NOVA]

that thing is going to be insane when its done, is it going to be at the good guys in scotsdale this year?

[BossaNova]

Down right scary.

Addendum: I love the way you guys engineered the rear suspension. V. cool.

[68/CamaroFL]

Looks Freakin Awesome!!:twothumbs

[maldo]

:twothumbs god i wish i had the money like that to put into my car.. love what you have done with the car so far... ...

[orbit]

More please! I've always thought of selling my Camaro for a Nova in that year. Just wasn't too sure what all could be done to them...

LMAO!!!:secret: Obviously alot.....:seizure:

[ebncrdr]

Lets see how many people would be willing to buy the dash, we could just build the blank and you guys can cut holes where you wnt them. If I can get enough interested to do it I might be able to figure out a way to get the cost down. So let me know whos in

Might as well sign me up for the dash too.

[protouring70]

Haven't been a big fan of the Nova's until now. WOW!!!!

[796spdbu]

I know im a few pages behind but count me in for a dash panel!!! How soon will you be deciding if you are going to be offering them? Thanks. Car looks awsome!!

[maldo]

Haven't been a big fan of the Nova's until now. WOW!!!!



same here really nice job dammmmmm :worship:

[Z06killinSBF]

The car is looking amazing. I love it.

[Fesler built]

Hey guys thanks for all the props, I did another post with a POLL on the Nova Dash so check it out and vote so we can decide if its something worth making.

[Fesler built]

More please! I've always thought of selling my Camaro for a Nova in that year. Just wasn't too sure what all could be done to them...

LMAO!!!:secret: Obviously alot.....:seizure:

I will try to post some new shots this week so you can see all the updates. Body work is almost done and its ready for paint. Hopefully have it painted with in two/three weeks. It will go together fast from there.

[orbit]

I will try to post some new shots this week so you can see all the updates. Body work is almost done and its ready for paint. Hopefully have it painted with in two/three weeks. It will go together fast from there.

Any new pix or news or anything yet?:drive2:

[Johnny C.]

This is one of my favorite Novas. Nice work. It looks awesome.

[michael6372]

any new pics or updates???

[brrymnvette]

Moar Pics!

[orbit]

Anything new with this bad boy?:fart:

[Brand X]

More pics, more pics!

[Fesler built]

We are hoping to have it painted in the next week or so. I will post some updates here in the next few days. Car looks sick

[orbit]

Car looks sick

Prove it! LMAO:Alchy:

[Fesler built]

https://static1.pt-content.com/images/pt/2008/08/1970NovaSSrendering-1.jpg

[Fesler built]

Here it is in the paint process, should see some color in a few weeks

https://static1.pt-content.com/images/pt/2008/08/DSC00109-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00110-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00111-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00096-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00097-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/08/DSC00137-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00136-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00135-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00134-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00133-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/08/DSC00178-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00183-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00182-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00181-1.jpg
https://static1.pt-content.com/images/pt/2008/08/DSC00180-1.jpg

[Chevrolaine]

Cool, won't be long now!!

[orbit]

:poke: Up date time yet???:smoke:

[Brand X]

Where are the updates!

[ebncrdr]

updates???

[NvrDun71]

updates???

..... x2

[Fesler built]

I am going over all the pics now and will post later tonight or tomorrow, have hundreds of pictures to go over. Sorry for the delay guys

[Fesler built]

Well we have less than 3 weeks till SEMA and we are on the NOVA now to see how far we can get. We just got it out of paint and it looks sick. Follow along up till SEMA to see the progress of the car, I will try to add pictures every few days.

https://static1.pt-content.com/images/pt/2008/10/Img0765-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0766-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0767-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0768-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0769-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/10/Img0773-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0775-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0783-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0784-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0785-1.jpg

[Fesler built]

Here comes the Dynamat

https://static1.pt-content.com/images/pt/2008/10/Img0798-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0806-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0808-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0810-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0811-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/10/Img0812-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0813-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0816-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0820-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0823-1.jpg

[Fesler built]

here is the new Currie rear end going together
https://static1.pt-content.com/images/pt/2008/10/Img0853-2.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0842-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0850-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0778-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0859-2.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/10/Img0845-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0861-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0864-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0880-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0945-1.jpg

[Fesler built]

Here is the huge rear Fesler FS 905 wheel

https://static1.pt-content.com/images/pt/2008/10/Img0918-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0929-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0948-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0949-1.jpg
https://static1.pt-content.com/images/noimg.gif

[Fesler built]

Here is the new Chris Alston front clip powder coated and ready to go

https://static1.pt-content.com/images/pt/2008/10/Img0889-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0907-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0915-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0941-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0932-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/10/Img0953-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0955-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0958-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0964-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0967-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/10/Img0971-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0972-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0973-1.jpg

[slck6t9]

sick!!!!!

[BMF Machine]

ToP NotcH just got a little higher....................

Nice work DudeZ!:eek:

[Z06killinSBF]

Very nice. I hope your rear quarters were rolled nicely, cause those rims are big a$$ mirrors. Can't wait to see more.

[gearheads78]

Turning out great. I really like how you did not completely smooth the firewall and left just enough of the factory detail.

[Fesler built]

Turning out great. I really like how you did not completely smooth the firewall and left just enough of the factory detail.

Thanks and that is what sets the car off I think, when you look at it it has just enough of the factory look to keep you interested. I dont like them fully shaved out they look to fake

[orbit]

Yeah the car looks fantastic:git: .

Is there going to be any type of striping going on it?

Also looks like a great shop to be at with all of the beautiful cars/trucks around. Would almost be like X-mas all of the time!:santa3:

[KnightMare]

Those black brakes look cool with them huge wheels

[Chevrolaine]

Come on, it's been a few days! You've had to of gotten something done.:fingersx: PICS!!
Looks like Silver will be quite popular at SEMA this year!

[Fesler built]

Come on, it's been a few days! You've had to of gotten something done.:fingersx: PICS!!
Looks like Silver will be quite popular at SEMA this year!

We are working away but not much to really look at right now doing everything under the car and dash where you cant really tell what we have done. Sucks because it looks like we are getting behind farter and farther with SEMA just around the corner. :seizure:

[WS6]

Black rotors? How? They look great. Where can I see pics of the second gen camaro sitting on the rack? Good luck getting the Nova together for SEMA. The car looks great

[MuscleRodz]

Black rotors? How? They look great. Where can I see pics of the second gen camaro sitting on the rack? Good luck getting the Nova together for SEMA. The car looks greatWilwoods come black now unless Chris had a set zinc'd black.

Mike

[WS6]

So basically everything that the pads don't touch stays black much like a normal zinc washed rotor that only rusts where the pads contact the rotor?

[Fesler built]

So basically everything that the pads don't touch stays black much like a normal zinc washed rotor that only rusts where the pads contact the rotor?

Yeah Basically, not sure how they will look onced used a few times but untill then they are sick

[BritishGreen68]

Did you guys fab a new outer wheel house all the way to the 1/4 panel or use the OEM section that welds to the wheel lip? I dont see any welds on the lip which made me think you worked off of that piece.. I have my wheel tubs all cut out and just trying to figure out a way to raise the wheel house so I can go lower with bigger wheels. I like the way you jaust made the whole thing I just cant figure out a way to make that outer piece..
https://static1.pt-content.com/images/pt/2008/03/img0159-1.jpg

[Josh292]

Awesome progress!!! :git: Whats the silver off of is it a BMW or Mercedes or Ford silver??

[Tony C.]

Count me in on a dash.

Tony C.

[keffe1]

now i want a nova any donations

[Josh292]

Updates?? :cool:

[ROACHZ28]

Love the updates. Keep them coming!

[796spdbu]

Car looks amazing!! what brand of wheel is on the 55-59 chevy truck in the back ground?

[Fesler built]

More suspension work

https://static1.pt-content.com/images/pt/2008/10/Img0945-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0941-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img0936-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0932-1.jpg

The painted hand built dash

https://static1.pt-content.com/images/pt/2008/11/Img1141-1.jpg

[Fesler built]

Headliner going in

https://static1.pt-content.com/images/pt/2008/11/Img1125-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1127-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1130-1.jpg

Glass going in

https://static1.pt-content.com/images/pt/2008/11/Img1104-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1056-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1063-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1052-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1045-1.jpg

Carpet going in

https://static1.pt-content.com/images/pt/2008/11/Img1081-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1094-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1090-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1086-1.jpg

AccuAir air system

https://static1.pt-content.com/images/pt/2008/11/Img1073-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1075-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1099-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1070-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1144-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1177-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1180-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img0975-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1183-1.jpg

LS7 going in

https://static1.pt-content.com/images/pt/2008/11/Img1203-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1207-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1208-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1256-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1256-1.jpg

GM wire harness

https://static1.pt-content.com/images/pt/2008/11/Img1244-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1247-1.jpg

Vintage Air unit going in

https://static1.pt-content.com/images/pt/2008/11/Img1164-1.jpg

[Fesler built]

Dash going together with Auto Meter gauges, Dakota Digital air ride control and Vintage Air control

https://static1.pt-content.com/images/pt/2008/11/Img1146-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1151-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1156-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1161-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1199-1.jpg

[Fesler built]

Rear bumper

https://static1.pt-content.com/images/pt/2008/11/Img1169-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1173-1.jpg

NEW FESLER BILLET Trunk Hinges

https://static1.pt-content.com/images/pt/2008/11/Img1224-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1239-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1259-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1262-1.jpg

AccuAir control unit for air ride

https://static1.pt-content.com/images/pt/2008/11/Img1265-1.jpg

NEW FESLER BILLET Tail Lights

https://static1.pt-content.com/images/pt/2008/11/Img1297-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1302-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1307-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1309-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1310-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1318-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1329-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1332-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1333-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1337-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1339-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1344-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1352-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1354-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1357-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1359-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1362-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1364-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1373-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1375-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1369-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1388-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1394-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1396-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1401-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1386-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1387-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1403-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1407-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1408-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1409-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1413-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2008/11/Img1415-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1417-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1419-1.jpg

Well after having the car out of paint for 5 days this was as far as we could get. Loading and going to SEMA

https://static1.pt-content.com/images/pt/2008/11/Img1420-1.jpg

[Mr.VENGEANCE]

chris what subframe and headers are those?

cars sick man..

[Fesler built]

chris what subframe and headers are those?

cars sick man..

Thanks man,

Chris Alstons front clip with Hooker headers on it.

[Chevrolaine]

Incredible!!:1st:

[hmartin]

What color code is that! I spent the last 10 minutes :bsjerk:. Beautiful car!

[brownz]

I love how you guys keep the car true to the roots how they look but just make them look that much better. GREAT WORK. do you have any pics of the tail light on or flashing?

[BaddestBuick]

Sweeet! I like how the tail pipes look flush with the bumper

[carguy502]

Dash going together with Auto Meter gauges, Dakota Digital air ride control and Vintage Air control

https://static1.pt-content.com/images/pt/2008/11/Img1146-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1151-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1156-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1161-1.jpg
https://static1.pt-content.com/images/pt/2008/11/Img1199-1.jpg
:jawdrop:Where did you get that dash panel and how can I get my hands on one? It looks like it is metal and I am not terribly fond of my plastic covans dash...

[QWK-SS]

:jawdrop:Where did you get that dash panel and how can I get my hands on one? It looks like it is metal and I am not terribly fond of my plastic covans dash...

I was wondering the same thing.

And the car is coming along very nicely! Great job! :smoke:

[BossaNova]

Thanks man,

Chris Alstons front clip with Hooker headers on it.

Those black headers look awesome next to those Al++ heads.

[BossaNova]

:jawdrop:Where did you get that dash panel and how can I get my hands on one? It looks like it is metal and I am not terribly fond of my plastic covans dash...

No duh!

[Fesler built]

:jawdrop:Where did you get that dash panel and how can I get my hands on one? It looks like it is metal and I am not terribly fond of my plastic covans dash...


We hand built it out of steel if you go back in the post you can see the building of it. We are working on getting them poped in Carbon Fiber right now and will now something soon.....

We can do steel but they are very expensive to build as it takes a few days.

[69Nova]

We hand built it out of steel if you go back in the post you can see the building of it. We are working on getting them poped in Carbon Fiber right now and will now something soon.....

We can do steel but they are very expensive to build as it takes a few days.

If you make them in Carbon Fiber I will defiantly buy one.

[carguy502]

If you make them in Carbon Fiber I will defiantly buy one.
X2. Let us know when they come to market.:yum:

[ebncrdr]

x3 on the carbon fiber dash panel

[Fesler built]

We are working on the Carbon dash right now. lets do a poll on them, if I can make 12 of them how many of you guys will buy them and get me your ideas on price points so i can make sure its worth it.

[WILWAXU]

I'd be happy with a metal one. Saw it as SEMA, very nice piece!

[ebncrdr]

We are working on the Carbon dash right now. lets do a poll on them, if I can make 12 of them how many of you guys will buy them and get me your ideas on price points so i can make sure its worth it.

I would be willing to shell out $275-300 for one

[preston]

I might have missed it but what headlights are you using ? They look a little bit like a projector light in a 7" round package ?

[carguy502]

I would be willing to shell out $275-300 for one
I'm in.

[Young Gun]

I would be willing to shell out $275-300 for one

I would expect them to be a decent bit more, carbon fiber aint cheap at all!

[ebncrdr]

I would expect them to be a decent bit more, carbon fiber aint cheap at all!

Agreed. I was just basing that on the Anvil 69 dash.

[ed1le]

LOVE IT! I think I just found the shade of silver I'm going to use! :)

[ed1le]

BTW, what is that color called and what brand is it?

[Motown 454]

As always awesome work

[1971CHEVELLE]

This car is gonna be awsome. Goodwork:)

[Goat05]

If you do an exact mold of that insert,and then offer it for a first gen..Well..Id drop $325+ on a legit carbon fiber piece.

[badbrad900rr]

i'm in on the dash. I want the metal one just like in the pictures. I'm going to order some 907's very soon for my nova i would love to buy the dash also.

[Part Time]

Absolutely my favorite X body build. Incredible!

[gearjammer]

Can you tell me who made the formed rear frame rails for your NOVA, they kinda look like the CE Formed Frame Rails. I've been looking to find a NOVA with frame rails like your cause I didn't just want to buy something till I could see how they worked.

Thanks,
Phil aka gearjammer

[Fesler built]

Here are some updates

https://static1.pt-content.com/images/pt/2009/02/Img1532-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1533-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1496-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1502-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1464-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1487-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1511-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1607-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1606-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1461-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1458-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1600-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1593-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1584-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1580-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1581-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1608-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1575-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1579-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1573-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1572-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1576-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1595-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1599-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1612-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1537-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1539-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1543-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1549-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1551-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1552-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1554-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1556-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1559-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1561-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/02/Img1565-1.jpg
https://static1.pt-content.com/images/pt/2009/02/Img1568-1.jpg

[Chevrolaine]

:worship: OMG! Great job guys!

[bigboy]

you guys did an out standing job

[torino420]

that thing is BADA$$, nice work!

[70TWO NOVA]

Chris, the Nova came out Sick! I have to say i hope that my Nova looks half that good when im done with it. Also thanks for the new background!!

[Fesler built]

Glad you guys like it, I will post some final done shots very soon

[jilge71]

i want to hear it run!!! awesome build

[Motown 454]

Awesome work as always. This thing looks sweet.

[69LT1Nova]

SHWING!!! Dang, I shouldn't look at these pics at work! Awesome job guys.

[icebird84]

SHWING!!! Dang, I shouldn't look at these pics at work! Awesome job guys.

Awesome job indeed , excellent project

[pmgm]

Wow!! Another awesome build great detail. I love the custom dashdoards !!!:jawdrop:

[syborg tt]

Chris the car looks great - So does it have a back Seat ??

[dodge]

WOOOOWWW indeed..awesome job guys

[slowcamaro]

Chris the car looks great - So does it have a back Seat ??

Im not exactly sure what this guy is asking...

[Young Gun]

Im not exactly sure what this guy is asking...

Sometimes when tubbing the rear end or with particular suspension setups you loose the back seat due to space.

[CruizinKev]

veeery nice!!

[6t9 camaro]

Simple question but where do you get your carpet and underlay from ???

[Fesler built]

Simple question but where do you get your carpet and underlay from ???


Its high end German stuff and we do it all in house

[Fesler built]

Sometimes when tubbing the rear end or with particular suspension setups you loose the back seat due to space.


See the new pics back seat is there and full we just build around it.

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0001-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0002-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0003-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00061-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00072-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0010-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0011-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0015-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0016-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0017-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0018-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0020-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0022-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00251-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0026-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0030-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0031-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00321-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0035-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0037-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0038-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0039-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00401-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0043-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0045-1.jpg

[Fesler built]

https://static1.pt-content.com/images/pt/2009/10/Img0048-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img0049-1.jpg

https://static1.pt-content.com/images/pt/2009/10/Img00501-1.jpg

[Jake616]

Damn, I have followed this build for a long time and it turned out absolutely amazing! That car is clean inside and out!

As always, Amazing work Fesler!

[colt zantop]

sick, sick, sick!!!!!!

awesome build!

[oestek]

Looks great!

[ReggD79406]

Awwww.... This build is SICK!

[Not puke green 71]

"""WOW"""That is a work of Art, I love it, Now if you were only selling it, and i had the Money,,,, I'd have me a sweet ride:6gears:

[srh3trinity]

That is one of the cleanest builds I have seen. Definitely the best looking 70 Nova I have seen by far. I guess I missed the fact that an LS7 was the engine of choice, that just sweetens the build. Nice work.

[bsclark]

Really nice work! Those ls7's are monsters, I'm sure that thing is a blast!

[jaybee]

That is one amazing Nova.

[rickpaw]

Impressive build, and impressive car.

What is the paint code and what brand? I'd love to have that color on my Firebird.

[protouring70]

That is a slick car! Your attention to detail is incredible!!!!

[Young Gun]

Interior looks fantastic Chris, love the whole overall build. Nice!

[scherp69]

Chris nice job!!!! x2 on the interior. Do you have any pics of what you guys did for kick panels. I'm debating about selling the stock ones for my 68, but want to make sure I can do something to replace them.

[IndyNova]

so i never heard if you were doing the dash or not? that is one bad ass looking nova, something I only wish mine could look like. What are the prices of the hinges and taillights?

[Fesler built]

so i never heard if you were doing the dash or not? that is one bad ass looking nova, something I only wish mine could look like. What are the prices of the hinges and taillights?


We are working on all interior parts now and will have prices soon. Just so much going on it takes some time. As for the Billet parts you can look and buy them here. http://shop.feslerbuilt.com/main.sc we have most in stock at all times.

[Motown 454]

Beautiful work Chris. I love those wheels their perfect on there.

[MrAngry]

um... yea... it came out "ok"...

:jawdrop:

[WS6]

gorgeous! Do you have any pics with the car at ride height? I'm really thinking about doing a Ventura or Nova next because they can sit so low since the wheels can tuck up into the rear quarters so well. Unlike my TA.

[IndyNova]

cool, found the billet, now for the big question: what color shade is that??

[wblanton]

Badas#$ Incredible workmanship..

[Fesler built]

gorgeous! Do you have any pics with the car at ride height? I'm really thinking about doing a Ventura or Nova next because they can sit so low since the wheels can tuck up into the rear quarters so well. Unlike my TA.

There is a video on our home page that shows the car up and down so you can see the lift it gets. you raise it up about 2 inches and you can drive so it drives nice and low and clears everything.

[Fesler built]

We just heard that this car will be in the next issue of Chevy High Performance and might be on the cover. If any of you get it first please let us know about it so we can look for it.

[Capown]

what head lights are those? I seen someone post on page 9 but I didnt see a response. I just read all 12 pages and I hate reading lol!!! I love this car

[Fesler built]

what head lights are those? I seen someone post on page 9 but I didnt see a response. I just read all 12 pages and I hate reading lol!!! I love this car


Those are our 7-inch bulbs

http://www.feslerbuilt.com/Fesler%20Billet/All%20Billet%20Parts/HALG%20Lights%20Box.jpg

http://shop.feslerbuilt.com/product.sc?productId=389&categoryId=122

[WTRacing]

https://static1.pt-content.com/images/pt/2009/11/1257049263-1.jpg



Amazing

[LeighP]

Chris....you guys build a class car!!!

[frojoe]

Any update on the carbon dash panel?

[Jeffrotech]

Nice Nova.

Were the wheels tuncked under so far to keep them from rubbing the outter sheetmetal?

[Conrad283]

Awesome build

[ArtosDracon]

Wow, just wow, gorgeous work.

So, who do I have to kill to get a job at your shop? I'm sure you have a disposable monkey that I could "relocate" so you'd have an opening.