My Satin 9C1

[oldskoolcaprice]

I will start this by saying, I'm new to the Socal area, just moved here from Texas about 8 months ago, and I have a work in progress project. This is my 95' 9C1 Caprice with a pretty stock LT-1. It currently has a 2" drop spindles w/bilstiens all around sitting on 275/60/15's w/ wide whites (for now; looking to upgrade to 17's), sporting some cop reproduction hubs, has a 3.5 MAF, a 95' Camaro CPU, a 2800 stall, electric waterpump, upgraded 15" dual electric fans, rebuilt front-end w/ all Moog components, BMR front/rear swaybars, BMR upper/lower adjust. control arms, and a desent low-buck flat black paint job......Soon to upgrade to a 845 GM cam, 1.6 rr w/ beehives, and a posi 3.73 Eaton geardrive....

[Young Gun]

welcome to the site! whereabouts in texas?

[oldskoolcaprice]

Good ol' hot and humid San Antonio....Damn! I miss SA, but I like the weather here better!

[oldskoolcaprice]

" "

[cheapthrillz]

That thing would look sick if everything was blacked out! Nice car.

[oldskoolcaprice]

Eventually, I want to put 17x9.5 & 17x11. But, for now i put those on to be a llittle different. I didn't want to stick regular old tires on there, so I could look like regular old caprice. Now it's got pizzaz!:fingersx:

[subtlez28]

I LIKE IT!!

It makes me miss my 95 9C1. It had the T56 swap and 4.10s. Good times!

If I were you, I would pick up some used SS wheels, and black them out to. It would be sinister to the core!

[Fawkes]

Agreed, some blacked out 17's or 18's would look nice on there. I'd keep the current ones also, just to be different now and again. :)

Oh, and welcome!