fuel pump block off plate drain.

[edl406]

I was looking around and found this for you guys running one turbo and not wanting to drill in the oil pan.
http://store.summitracing.com/partdetail.asp?part=MOR%2D65397&autoview=sku
looks like a -10 or -12

[hotrodf1]

Pretty neat,

I just took and drilled/tapped my chrome one for 1/4" pipe thread, and went from there. It works fine, too for you low dollar guys like me.

Monster Garage "freebie"

[camcojb]

Pretty neat,

I just took and drilled/tapped my chrome one for 1/4" pipe thread, and went from there. It works fine, too for you low dollar guys like me.

Monster Garage "freebie"

good idea, but I would opt for tapping it to at least 3/8 - 1/2" npt, as the inner diameter of a 1/4 npt fitting is pretty small, and may lead to oil drain issues.

Jody

[DeltaT]

Cool idea - thanks for posting this.

FYI - Moroso web site states it is a -12.

Jim