best 3 point seat belts for 1gen camaro??

[Bowtie racing]

Hello , i know there has been talk about belts before and i did used the search button before posting this ;) But i still want your opion guys!!

As title says , i want to get good 3 point belts for my car. Its 69 camaro without console and seats will basic sports / recaro style.

So far i have my mind on morris belts - what do you think ??

[CHRIS67]

I'm putting new seats and morris retractable 3 point in tomorrow. I'll let you know.

The first thing I noticed is the instructions are generic. For $275 you would think that they would take 15 minutes and have them car specific. :confused:

[CarlC]

Morris makes a pretty nice setup. Summit carries them.

[Bowtie racing]

Thanks Chris is sure liked to hear your first hand opinoin, so please let us know.

CarlC, i forgot to say i am having DSE rollbar, i hope its not an issue.

[morrisclassic]

We could make a more specific seatbelt instruction install but the install is straight forward,just remove your original seatbelts and bolt our 3 point retractable set in.If you need any assistace such as measurements where the mounting points are behind the headliner please contact us. Thank You for purchasing our products. Billy

[morrisclassic]

If you are using Morris Classic Copncepts seatbelts with a roll bar
you may need a set that doesn't have the lanyard on them. Roll bars usually have a tab welded on them for mounting the top mount.
Just call us and let us know that you are using a roll bar and we will send you a set for that application.The roll bar set has a different top mount too.
Thank You, Billy

[Bowtie racing]

If you are using Morris Classic Copncepts seatbelts with a roll bar
you may need a set that doesn't have the lanyard on them. Roll bars usually have a tab welded on them for mounting the top mount.
Just call us and let us know that you are using a roll bar and we will send you a set for that application.The roll bar set has a different top mount too.
Thank You, Billy

Thank you Billy for your personal reply. I give you an PM ,

Thanks!!!!

[Bowtie racing]

Billy, please clear you PM box , its full !!

[CHRIS67]

Thanks Chris is sure liked to hear your first hand opinoin, so please let us know.

CarlC, i forgot to say i am having DSE rollbar, i hope its not an issue.

Once I got the headliner opened on the sides to see what I was looking at installation was a snap. They went in with zero fabrication and fit real nice in the car. I had them paired up with Scat Procar seats and they fit perfectly. 1/8" clearance between the seatback adjustment and the retactable belt. Real high quality hardware comes with them as well.

Nice product Billy! It made for an enjoyable Saturday in the garage.

:cheers:

[morrisclassic]

Thank You for the compliments and for buying our products, Billy

[Bowtie racing]

Thank You for the compliments and for buying our products, Billy

Billy, i finally got a chance to email you back. Sorry for delay!!

[rsk68]

Billy,

I need to order a pair for the 68 camaro in black, I left a message.

[morrisclassic]

Rick,
We have been out of the office. I got your message on Saturday late.
We will call you.
Thank You, Billy

[rsk68]

Billy,
I still need a matching set for the rear, do you have them where the buckles match?

[Chad-1stGen]

Hmm I might be interested in a rear set as well. Didn't realize you guys did them.

[morrisclassic]

Rick,

Yes we have the lap belts to match the front 3-points.
Just give us a call 864-987-0032
Thank You, Billy