Measuring subframe for straightness.

[LowBuckX]

Hopefully going this coming weekend to check out a subframe near me. He has 3 and Im hoping he will let me cherry pic one out. IS there a spread sheet somewhere for measurements to make sure all is well.

Or can someone give me pointers on what to look for???

Thanks a ton guys.

[cheapthrillz]

Maybe this will help....

http://hotrodhomepage.com/hrhp_images/camaro_sub_frame.jpg

Or maybe this one would be better....

http://images.google.com/imgres?imgurl=http://1stgencamaro.net/images/framespecs.jpg&imgrefurl=http://1stgencamaro.net/frame.htm&h=314&w=644&sz=25&hl=en&start=1&um=1&tbnid=vx_jhu9SJWiXoM:&tbnh=67&tbnw=137&prev=/images%3Fq%3Dcamaro%2Bframe%2Bdimensions%26um%3D1% 26hl%3Den%26safe%3Doff%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DG

Good luck!

[wendell]

The only subframe measurement given in that image is a pretty short diagonal. In addition to that one, measure the longer diagonal from the rear subframe bushing hole to the front core support hole.