PDA

View Full Version : Torque specs


01somta
02-03-2008, 12:32 PM
Are there any torque specs for the subframe (bushing) bolts on a first gen camaro?
MrQuick
02-03-2008, 12:36 PM
After seeing guys bust they nut cages I have found that 65-75 ft lbs is more than adequate. Put the impacts down. LOL
70LS1NOVA
02-04-2008, 08:10 PM
The instructions that come with the global west kit say 100 ft. lbs of torque for the rear four, (frame to body) and 60 ft. lbs. for the two rad support bushings.
dipren443
02-04-2008, 08:31 PM
The instructions that come with the global west kit say 100 ft. lbs of torque for the rear four, (frame to body) and 60 ft. lbs. for the two rad support bushings.

Good reference for bolt torques for just about any diameter and grade bolt

http://www.raskcycle.com/techtip/webdoc14.html