PDA

View Full Version : Almost Done Updating the Ole Speed Inc. Camaro



4MuscleMachines
01-27-2008, 10:42 PM
Well, it's almost been 2.5 years since I purchased it.
https://www.pro-touring.com/forum/showthread.php?t=10016

I haven't done too many exterior changes other than new tires, and the Marquez billet ft/rr lights w/ sequential LEDs, and bezels but there is plenty of new stuff that is now on the car. Starting with the suspension, all the old BMR stuff came out along with the 12.19 Wilwoods and stock spindles. In their place is now Global West all around and C5 13" six piston brakes on ATX spindles. All the steering linkages have been replaced and an ATX/Lee steering box installed. A new Hotchkiss front bar aids in the handling. The car now handles like it's on rails, a huge improvement over what it was.

As far as appearance, the interior has new Arizen seats, pedals, DSE closeout, and a MOMO wheel. Also replaced the column with a tilt column which makes it easier to enter and exit. Also, the RS doors have the DSE motors and I replaced the rear battery tray with a DSE tray. I still need to install the new deluxe door panels w/power windows and locks.

What is left to do is install the new Ricks tank and a DSE master cylinder/booster. The one on it now is too big looking.

I took her out for a spin today after sorting everything out and she handles very well for an old car. I got lucky and nailed the backspacing so the rear 295/35/18's and front 255/40/18's don't rub at all. I was worried since the rear had Ford bearings on the axle ends installed (had to get the axle tubes cut) and I had changed the 4.56 rear gears to 411's (good move IMO). I had been thinking for a while of buying a cammed LS3, but after driving it, I am happy. My wife and wallet also thank me LOL.

Sorry for babbling, but I feel like its been a long road and I am just about finished. :Alchy:


https://static1.pt-content.com/images/pt/2008/01/do78cj-1.jpg
https://static1.pt-content.com/images/pt/2008/01/fwlg8h-1.jpg
https://static1.pt-content.com/images/pt/2008/01/2d82hrt-1.jpg
https://static1.pt-content.com/images/pt/2008/01/24ysahe-1.jpg
https://static1.pt-content.com/images/pt/2008/01/8wwrv4-1.jpg

MrQuick
01-27-2008, 10:50 PM
Looks good Frank, I can't believe its been 2+ years. Dayumm....I gotta fix that cable set up for you.

Gotta love that ATS spindle and box upgrade...the most felt improvment yeah?

SamHatco
01-28-2008, 09:39 AM
This is an awsome car. What wheels are those and what is the backspacing in order to put those huge tires in there?

Sam

tuff57
01-28-2008, 10:25 AM
really nice good luck with it

muthstryker
01-28-2008, 06:07 PM
wow, its simply beautiful. do you have any more exterior shots? like more side views with the wheels and what not? I cant get enough of it. nice work man!

4MuscleMachines
02-03-2008, 12:52 PM
My feelings exactly Vince. Yea, the wires are going out. I still need to clean up some of the install.

4MuscleMachines
02-03-2008, 12:56 PM
This is an awsome car. What wheels are those and what is the backspacing in order to put those huge tires in there?

Sam

The wheels are Kinesis. http://www.kinesismotorsports.com/

They were purchased a while back so I don't know if they still sell this model or not. I can't recall the backspacing, but it is custom since the rear was narrowed a bit. Just aggressively roll the lips and it can be done with no rubbing.

Rybar
02-03-2008, 01:08 PM
Frank your car looks Killer. I like all the new mods you did to it.

What are the motor specs again and what kind of power is it making?

turboregal
02-03-2008, 01:40 PM
Nice car,love the wheels

onebad2
02-03-2008, 02:10 PM
This car is SOOOOOOO Bad A$$!!!! I love it!


Paul