PDA

View Full Version : Any 2nd Gens with a Ram Jet setup?



Raptor Pilot
01-20-2005, 12:55 PM
Haven't seen any pop up on any other boards that I frequent. I am pondering getting it for my '70 Formula build up but wonder about clearance, etc...that, and I'd just like to see one.

WS6
01-20-2005, 05:23 PM
its no taller than an TPI so it should fit no problem.

TPI Monte SS
01-20-2005, 05:24 PM
There's an '81 Z28 with a Ramjet intake in the Feb. 2005 edition of Chevy High Performance magazine. Here's the article - http://chevyhiperformance.com/featuredvehicles/148_0502_camaro/

Hope that helps ya!

WS6
01-21-2005, 04:52 PM
nice looking car.

Raptor Pilot
01-21-2005, 06:35 PM
While the Ram Jet is similar in height dimension to the stock TPI system, the Ram Jet has a known fitment problem in 3rd gen 'Birds...some of the hood bracing needs to be removed for a perfect fit. That is what I was wondering here really. Thanks for the link. Nice car, and I dig the seats too. I am kind fo getting tired of the Bat Wing style racing seats.

yody
01-21-2005, 07:15 PM
i woulnd't go with the ramjet, it is only like 350hp and you can't modify it at all, the computer supposedly to run the injection can't be adjusted, so you can't even change camshafts. I would keep the pontiac 400 and make up a custom fuel injection, they did it in carcraft awhile back. looked really nice, they used it on their 455 they built in the big block shoot out