PDA

View Full Version : Weight of a 1st gen camaro?



Stu Seitz
01-19-2005, 09:49 PM
I know all you old guys know this and have seen this thread a million times but is there any place where I could get the specs on a stocks 69 maro (ie wheel base, weight, lenght)? If not anyone know the weight of lets say a all iron sbc camaro?

will69camaro
01-20-2005, 08:10 AM
Pretty sure the title on my car says 3400 lbs. Wheelbase is 108 inches, length is 186 inches i believe...Weight can be off considerably, my car weighed in at 3300lbs full of gas after everything i'd done and i did nothing but add weight to the car atfirst (bigger engine, stereo, insulation,etc...). Anything else you need to know?

William

qwik1320
01-21-2005, 08:56 PM
The "Big Book of Camaro Data 1967-1973" has the following info:

Overall length = 186.0 inches
Overall width = 74.0 inches
Overall height = 51.6 inches
Wheelbase = 108.0 inches
Front tread = 59.6 inches
Rear tread = 59.5 inches
Curb weight = 3120 lbs

The weights seem a little low, they have a 67 weighing 2910 lbs and a 68 2950 lbs.

David Pozzi
01-24-2005, 01:29 PM
I got this list from John Z at Team Camaro:
1969 Camaro factory weights are as follows:

Base 12437 V8 Coupe 3135 (column 3-spd.)
Base 12467 V8 Convt. 3385 (column 3-spd.)

Add for options:

Power Windows 19
Folding Rr. Seat 38
Power Top 8
Vinyl Roof Cover 6
Air Conditioning 97
Power Brakes 11
Frt Disc Brakes 26
JL8 4W Discs 97
350 V8 (LM1/L48) 86
396 V8 249
AM Radio 8
AM-FM Radio 10
Stereo Radio 17
Tape Player 21
M20 Saginaw 4-spd 16
Muncie 4-spd. 4
Powerglide -5
TH350 23
TH400 57
Power Steering 28
Rally Sport 22
Z/28 83
Ducted Hood 8
D80 Spoilers 7
from John Z

Steve1968LS2
01-26-2005, 11:50 AM
I am very curious what my car will end up weighing. No AC and No heat combined with the LS1 should more than make up for the dynomat and heavier suspension.

Anyone want to guess? :)

F70t/a
01-26-2005, 11:53 AM
2950 lbs :bananna2:

harshman
01-26-2005, 12:24 PM
my combo is at 3,700 lbs w/ driver and full tank - all iron big block w/ a t56. take off 200 lbs for driver and about 150 for a small block w/ iron heads.

PAI Racing
01-26-2005, 01:14 PM
2,740 lbs. without driver and 1/2 tank of fuel.

CarlC
01-29-2005, 05:23 PM
No driver, full tank, details of the car on my website.

LF 949#
RF 948#
LR 803#
RR 824#
Total 3523#

zman1969
02-03-2005, 03:55 PM
I had weighed my 69 R/S Z28 with iron headed big block 4 speed -no air 3450lbs
my 69firebird 400auto w air =3650lbs
both had p/s and pwr disc
hope this helps

bookends
02-06-2005, 09:00 PM
mine is a stripper model. iron block, heads, manifold. it weighed 3220
Jon

Jewce
03-03-2005, 12:09 PM
SCCA Approved scales at a divisional autocross.

3210 w/half tank of gas

3395 w/me in it

Think I might have acheived the lighter weight from using cheaper aftermarket body panels when I restored it instead of GM. Panels are thinner and I didn't have the money at the time (mowing lawns in high school).

h_leadfoot
03-04-2005, 02:59 AM
2650/full tank

Yenko boy
03-04-2005, 04:43 AM
Lead foot, what did you do to remove so much weight?

h_leadfoot
03-04-2005, 07:47 AM
Glasfiber flipfront. Other seats. Glasfiber bumpers. Etc..
More weight is coming of. But not untill next season.

inSANe DIEGO
03-16-2005, 12:45 PM
hey leadfoot...
Where did you get the glass front end and how is the quality? With regard to finish and sturdiness? Cost?

chicane67
03-16-2005, 09:09 PM
2850 ish........all steel.

h_leadfoot
03-17-2005, 07:31 AM
hey leadfoot...
Where did you get the glass front end and how is the quality? With regard to finish and sturdiness? Cost?


I donīt know. Came with the car when bought it. Some guy here in Sweden made it. Realy nice quality and lots of sturdiness.

By the way. I paid $3000 for the car. No rust what so ever. Is that a good price in the states?

Steve68
03-17-2005, 08:29 AM
UUUHHHHhhh, YAH!!!!!!!

h_leadfoot
03-17-2005, 09:48 AM
This was not included..


406" SB 528hp/667Nm + 250hp NOS
Hotchkis TVS system
Guldstrand mod.
Wilwood 6 piston caliper with 13" rotors
Eagle Alloys "212" series rims 18*8 front 18*9,5 back
9.99sek. rollcage

Anyway, was it a good price?

harshman
03-17-2005, 10:53 AM
I donīt know. Came with the car when bought it. Some guy here in Sweden made it. Realy nice quality and lots of sturdiness.

By the way. I paid $3000 for the car. No rust what so ever. Is that a good price in the states?

:eek: :getout:


um..... yes that is a very good price.

h_leadfoot
03-17-2005, 11:19 AM
:eek: :getout:


um..... yes that is a very good price.



OK! Sweeeeeeet.:woot:

J-Rod
05-11-2005, 06:31 PM
I came in at 3090, 802 798 front, 748 742 rear. For not trying to balance the car, it came out pretty close.

1968 camaro, LS1/4l60E, battery in the trunk, dynamat all over, 99 camaro dash, seats, console, no rear seats, heavy 17" TT2s and a full tank o gas.