Twin Blown lsx by Nre

[Tom Nelson]

Here's a couple of shots of a twin rotex blown 402 inch lsx we just dynoed.We used a stock 05 zo6 cam with cnc ported l92 heads.8.5 compression.The engine made 630 ft lbs at 4900 rpm and 640 hp at 6100 rpm at 8 psi and 780 ft lbs and 800 hp at 13 psi on 91 oct.Not a turbo motor but with the stock cam i thought the numbers were pretty good this thing actually will idle at 300 rpm and sounds like a stocker at 600 rpm really cool.Just a fantastic cruiser with alot of grunt.Figured you like to see some pics.Tom Nelson Nelsonracingengines.com

[Hidro]

:hail: Very cool if you got a vid of it running post it pls.

:)

[19topless69]

Nice pics! I could only dream of something like that.

[Charley Lillard]

Looks like W2W's Joe Nova only shiny. Rotrex ?

[Tom Nelson]

:hail: Very cool if you got a vid of it running post it pls.

:) I will post a video but it will be a few weeks before i can get around two it.

[Tom Nelson]

Looks like W2W's Joe Nova only shiny. Rotrex ? Kurt sold me the Rotex units and then we made a drive plate for them.

[WS6]

very cool Tom. What is this one going in?

[Kenova]

...... this thing actually will idle at 300 rpm ....
That's just plain nuts! At that speed you could almost count the exhaust pulses.

Ken

[pist0lpete]

I am concerned about the drive plate mount setup not being sturdy enough you sure thats not flexing Tom? Just kidding of course that is one beefy setup and nice numbers to boot!