Free Car Manuals

[novanutcase]

Found this and had to share........

Step 1: go to http://www.bedlib.org/ebsco.html
Step 2: click on the ARRC logo near the top
Step 3: under "user id"type "user" and under "password" type "password"
Step 4: scroll to the bottom, and press the AARC logo again

John

[MarkM66]

Great info!

[paul67]

Brilliant :worship: this needs to be made a sticky if poss.

[Bad Bowtie]

John,
You have impecable timing:yeah: I was looking this morning for something like this where i could get a wiring diagram for my girlfriends 03 Monte Carlo SS, her stereo amplifier is wigging out and this should help me trace it down. Thanks for sharing this information with the board.

BB

[oestek]

Here's another cool one - not so much repair info, but tons of original literature, sales stuff, manuals, etc.

http://www.v8tvshow.com/forum/index.php?topic=170.msg538#msg538

[go-fish]

That thing sucks. I went to 71 Dodge Challenger. It showed a bunch of FWD repair stuff. I guess it would ork better with newer cars.

[novanutcase]

That thing sucks. I went to 71 Dodge Challenger. It showed a bunch of FWD repair stuff. I guess it would ork better with newer cars.

Which link are you talking about?

John

[CRCRFT78]

Good info.

[67rsssls]

John,

Thanks for the link. This is just the info I have been needing!:worship:

[West Texas Z]

Thanks!!

[go-fish]

Which link are you talking about?

John

The first one. Does it actually show the particular vehicle on the other cars? When I looked up Challenger on the first one it definately wasn't a repair manualfor a Chally.

[Hellrace]

Thanks !! :seizure:

[Rhino]

This is the same database that most large libraries have access to. In my research it's seemed that the only vehicles with a good amount of wiring diagrams are mid 80's and up. It's great for DD's and conversions, but most early 80's and down is lacking.

I've used the wiring diagrams an insane amount working out the pin outs for various components insuring that they'll work with my intended purpose.
I've also seen the repair procedures to be pretty accurate in regards to the model you're researching. I haven't run across any manuals like go-fish is referring to.

[Bad Bowtie]

Hey John,
Do you have any more password "cracks" looks like this one ran out, couldn't get it to log in. Well it was good while it lasted, I was able to download stereo wiring diagram i needed a few days ago
BB

[clemracer]

I also tried to log on today and it would not let me is there a new user name and password. Thanks Jeff

[BonzoHansen]

This is the same database that most large libraries have access to. In my research it's seemed that the only vehicles with a good amount of wiring diagrams are mid 80's and up. It's great for DD's and conversions, but most early 80's and down is lacking.

I've used the wiring diagrams an insane amount working out the pin outs for various components insuring that they'll work with my intended purpose.
I've also seen the repair procedures to be pretty accurate in regards to the model you're researching. I haven't run across any manuals like go-fish is referring to.
Try the autozone site. They seem to have lots of WDs for older cars. They have 2nd gens covered to a point.

[novanutcase]

Try this:

h**p://connection.ebscohost.com/content/librarySearch.html?id=7033368338433293

Just replace the ** with.......well....you know!

John

[Smock67]

nope still doesn't work damn i really need this to help my girl but in a new speedometer sensor in her 93 lebarron.

[novanutcase]

nope still doesn't work damn i really need this to help my girl but in a new speedometer sensor in her 93 lebarron.

Did you copy it into the address box and change the "H**P" to "HTTP"? If you don't it won't work!

John

[Smock67]

well i know that i did that and entered in the user name and password and it didnt work.

[novanutcase]

well i know that i did that and entered in the user name and password and it didnt work.

You shouldn't need a user name or password! It should go straight through!

John

[texasdvldog]

You shouldn't need a user name or password! It should go straight through!

John

Didn't work for me either. all it did was redirect me back to the website. :throw:

[novanutcase]

Didn't work for me either. all it did was redirect me back to the website. :throw:

Try this:

User - Library
Password - Library

or

User - auto
Password - Library

[TA219]

library
library

This one worked for me!! :D

[MarkM66]

Worked for me until I had to click why type of engine, then went back to login. Will not go to actual information.

[TA219]

it did that to me several times but eventually it let me in

[BADVELLE]

It worked for me this time, thanks for the help.