PDA

View Full Version : where to mount..



kman67rsss
01-16-2005, 06:05 PM
oil pressure sending unit on a BBC. i have it down low on the block near the timing cover, close to where the p. steering pump should go but i think im gonna need to move it. thanks.

Zefhix
01-16-2005, 06:54 PM
oil pressure sending unit on a BBC. i have it down low on the block near the timing cover, close to where the p. steering pump should go but i think im gonna need to move it. thanks.


depending on the gen of block you should have a plug right above the oil filter on the driver side to tap into...

kman67rsss
01-16-2005, 07:12 PM
yes, i have that plug but was worried about header clearance because the electrical Sending unit is rather large. i guess its worth a shot though. thanks.

ProdigyCustoms
01-16-2005, 07:33 PM
A brass 45 or 90 degree fitting may be the ticket. The factory used a 45.