redhead
11-13-2007, 03:02 PM
I'm laying out a gen 4 va system in my 68 camaro to include a
custom bulkhead fitting.
my question is about the interior lines that go from the main unit
to the custom bulkhead fitting.
Ideally I wanted the four lines to be fabbed up solid but I am having
trouble finding anyone locally capable of the bends and o-ring
fittings. I would accept alum or copper piping.
are most of you going with soft lines under the dash using the
standard ends from va or have you found local sources to provide
custom lines?
da.
custom bulkhead fitting.
my question is about the interior lines that go from the main unit
to the custom bulkhead fitting.
Ideally I wanted the four lines to be fabbed up solid but I am having
trouble finding anyone locally capable of the bends and o-ring
fittings. I would accept alum or copper piping.
are most of you going with soft lines under the dash using the
standard ends from va or have you found local sources to provide
custom lines?
da.