dafabricata
09-26-2007, 03:19 PM
How is this done? Is there a kit that uses the stock subframe and adds mounting provisions for the C5/C6 corvette suspension and brakes? I have seen subframes and full frames available to make this possible, but they are out of my price range at the moment.
I would like to put the new C6 Rims (18X8.5 Front....and 19X10 rear) and use the suspension and brakes from a C5 or C6 Vette.
I want it to sit low, handle, and brake well.
Rims/tires, Suspension, and Brakes are first on my list of things to do to the 67. I have a TIG and am not affraid to weld but figuring out all the measurements and all that is involved seems like a lot! Thats why I am wondering if ther is a kit that will accomplish what I want. I am on a budget. I found the wheels locally (Cheap!) So now I need to aquire the Brakes and suspension.
Any Ideas would be greatly appreciated!!!
I would like to put the new C6 Rims (18X8.5 Front....and 19X10 rear) and use the suspension and brakes from a C5 or C6 Vette.
I want it to sit low, handle, and brake well.
Rims/tires, Suspension, and Brakes are first on my list of things to do to the 67. I have a TIG and am not affraid to weld but figuring out all the measurements and all that is involved seems like a lot! Thats why I am wondering if ther is a kit that will accomplish what I want. I am on a budget. I found the wheels locally (Cheap!) So now I need to aquire the Brakes and suspension.
Any Ideas would be greatly appreciated!!!