Fast01
08-05-2007, 10:00 AM
Ok, what do ya think it'll make?
388 cubes, AFR 195's, Edelbrock Pro-Flo EFI w/ 30# injectors, approx. 9.7:1, Crower hydraulic roller .526 int. .547 exh. 226/236 on 114*lobe center, 1 7/8" headers into ??? mufflers. Not that it'll make much difference, but the rods are 6", pistons are KB (polished crowns), the combustion chambers and exhaust ports are ceramic coated and the valve stems and guides are dry film lubricant coated. Any guesses? Just curious what you all think. My guess is high 400's. 480 or so.
388 cubes, AFR 195's, Edelbrock Pro-Flo EFI w/ 30# injectors, approx. 9.7:1, Crower hydraulic roller .526 int. .547 exh. 226/236 on 114*lobe center, 1 7/8" headers into ??? mufflers. Not that it'll make much difference, but the rods are 6", pistons are KB (polished crowns), the combustion chambers and exhaust ports are ceramic coated and the valve stems and guides are dry film lubricant coated. Any guesses? Just curious what you all think. My guess is high 400's. 480 or so.