!! can we see some late sec gen camaro!!

[brownz]

would like to see some late sec gen camaros dont see too many.:headbang:

[DB Z28]

https://static1.pt-content.com/images/pt/2007/07/827200660-1.jpg
LS-7 powered

[79_EFI_Z]

Well, I can show my work in progress. Hopefully It will be getting a paint job in the next few months. =)

http://s183.photobucket.com/albums/x227/79EFIZ/79%20Camaro%20Z28/

[brownz]

very nice and clean dont see that alote out of these year camaros:twothumbs

[brownz]

Well, I can show my work in progress. Hopefully It will be getting a paint job in the next few months. =)

http://s183.photobucket.com/albums/x227/79EFIZ/79%20Camaro%20Z28/

thats alote of work would like to know what you did with the rear end,brakes and what type of wheel are they very nice and what sizelove it post more after paint

:git:

[79_EFI_Z]

The rear is a 8.5" 10 bolt that was sandblasted and POR 15'd. It was completely rebuilt with new bearings and seals. I also installed richmond 4.10's but am still running the stock diff and axles. After I go to paint I'll upgrade those parts asap, depending on $$$ availability.
The brakes are a Wilwood Dynalite 4 piston disc brake kit. Supposedly, it is supposed to be a direct fit, but on my photobucket site you can see in pic 101 where I had to have it machined to clear the inner ridge in pic 103. It didn't really need the much machining but I didn't want to pay for it twice, so I had them take off a little extra.
The wheels are Centerline Meteor 17x8 in the front and 17x9.5 in the rear, with Goodyear Eagle F1 GSD3 255 40x17 and 285 40x17.

Thanks for the compliments! - Bob