OneLapCamaro - Progress

[James OLC]

We are making headway on the OLC Camaro.

The roll cage is in:

https://static1.pt-content.com/images/pt/2007/06/from20drivers-1.jpg

https://static1.pt-content.com/images/pt/2007/06/from20side-1.jpg

https://static1.pt-content.com/images/pt/2007/06/towards20seat-1.jpg

17673 17674

[James OLC]

https://static1.pt-content.com/images/pt/2007/06/cage202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/cage203-1.jpg

17675 17676 17677

[James OLC]

The Tilton Pedal Assembly is in and thanks to the custom steering column that Ididit Inc. built for us, the ATS Lee Engineering power steering box is good to go:

https://static1.pt-content.com/images/pt/2007/06/drivers20high-1.jpg

https://static1.pt-content.com/images/pt/2007/06/tilton20mc202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/tilton20pedals-1.jpg

https://static1.pt-content.com/images/pt/2007/06/pedals201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/pedals202-1.jpg

[James OLC]

https://static1.pt-content.com/images/pt/2007/06/pedals205-1.jpg

[James OLC]

And the rest is coming together as well

https://static1.pt-content.com/images/pt/2007/06/june2016201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/june2016202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/june2016203-1.jpg

https://static1.pt-content.com/images/pt/2007/06/june2016204-1.jpg

[James OLC]

https://static1.pt-content.com/images/pt/2007/06/june2016206-1.jpg

https://static1.pt-content.com/images/pt/2007/06/june2016207-1.jpg

I hope to have the rest of the front end together over the course of the week. We'll mock up the engine and dry sump as soon as the parts arrive and with some luck have the front end together.

Our Stainless tank from Rick's Stainless arrived Friday (thanks Rick :hail: ) and we will get it mounted when we get the car back on a lift. Then we can figure out how we are going to mount the exhaust, rear end cooler, and plumbing for the brakes and traction control. It's kind of busy back there:

https://static1.pt-content.com/images/pt/2007/06/3link201-1.jpg

[Mr Nick]

Very nice, although I prefer Bud Light.

[aussiebj]

Nice looks great.......id go with Corona

[James OLC]

Stealth Tank from Rick's Stainless -

https://static1.pt-content.com/images/pt/2007/06/Ricks202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/ricks206-1.jpg

[James OLC]

Front suspension is back in place:

https://static1.pt-content.com/images/pt/2007/06/j2920susp201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/j2920susp202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/j2920susp203a-1.jpg

https://static1.pt-content.com/images/pt/2007/06/j2920susp204-1.jpg

Thanks again to Tyler and everybody at ATS! :worship:

[James OLC]

Finished the day hanging sheetmetal - again:

https://static1.pt-content.com/images/pt/2007/06/drv20low201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/drv20hi201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/pass201-1.jpg

https://static1.pt-content.com/images/pt/2007/06/pass202-1.jpg

https://static1.pt-content.com/images/pt/2007/06/drv20hi202-1.jpg

[dodge]

looking good

[LowBuckX]

Looks great but please tell me your flush mounting the exaust coming out the 1/4 panel....... A chrome tip wouldnt look right routed that way.

[formula98]

Great looking project. keep the posts coming......

[andrewb70]

Looks great!

Andrew

[Mr Nick]

Looks awesome!

I'm new to the hard core PT stuff... is that a remote reservoir for the shock?